QUINT POWER power supplies with maximum functionality
QUINT POWER circuit breakers magnetically and therefore quickly trip at six times the nominal current, for selective and therefore cost-effective system protection. In addition, the high system availability is ensured by preventive function monitoring which reports critical operating states before errors can occur.
Reliable starting of heavy loads takes place via the static power reserve POWER BOOST. Thanks to the adjustable voltage, all ranges between 18 V DC ... 29.5 V DC are covered.
QUINT-PS/1AC/24DC/ 5/CO
-
Power supply, with protective coating
2320908
Primary-switched power supply unit QUINT POWER, Screw connection, DIN rail mounting, SFB Technology (Selective Fuse Breaking), input: 1-phase, output: 24 V DC / 5 A
Detalhes dos produtos
UL Recognized
ID de certificação: E211944IECEE CB Scheme
ID de certificação: SI-6188 A1EAC
ID de certificação: RU S-DE.BL08.W.00764UL Listed
ID de certificação: E123528Type approved
ID de certificação: SI-SIQ BG 005/004DNV
ID de certificação: TAA000030XcCSAus
ID de certificação: 1897779BIS Licence Document
ID de certificação: R-41268801EAC Ex
ID de certificação: KZ 7500525010102094IECEx
ID de certificação: IECEX TUN 11.0002XcUL Listed
ID de certificação: E199827UL Listed
ID de certificação: E199827KC-s
ID de certificação: 20-KA4BO-0145XINMETRO
ID de certificação: DNV 19.0188 XATEX
ID de certificação: TUEV 11ATEX555674 XNEPSI-EX
ID de certificação: GYJ20.1322XCCC
ID de certificação: 2020322303000836
Vantagens
For superior system availability
Reliable starting of difficult loads with the static POWER BOOST power reserve with up to 1.5 times the nominal current permanently
Fast tripping of standard circuit breakers with dynamic power reserve SFB (selective fuse breaking) technology with up to 6 times the nominal current for 12 ms
Preventive function monitoring
Optimum protection with dip coating for 100 % humidity
Perguntas mais frequentes
Can I trigger a standard miniature circuit breaker with the power supply?
Yes, standard miniature circuit breakers can be triggered safely with the QUINT power supply. Please refer to the SFB configuration matrix, which can be found under Various in the download area.
Can the power supply also be used in environments with corrosive gas contamination?
All our QUINT power supplies are tested in accordance with the ISA G3 Harsh Group A standard and meet the requirements of the standard.
Why is the housing of the power supply warmer than that of other manufacturers?
The reason for this is our heat dissipation concept: All power components are located on the side panels or on the rear panel. The advantage here is that the temperatures inside remain cooler, which increases the service life of the power supply.
Can I operate the DC OK relay with the output voltage of the power supply?
The DC OK relay can be connected to the output voltage of the power supply, but may only be loaded with max. 1 A. We recommend using a protective circuit for this.
Can interference from the supply network be transmitted to the output of the power supply?
No, since the QUINT power supply is designed with a multi-stage converter concept, interference is not transmitted. Interference is already eliminated in the input circuit and does not reach the 24 V output of the power supply.