1. Página inicial
  2. Produtos
  3. Redundancy modules
  4. Active redundancy modules
  5. Redundancy module, with protective coating - QUINT-ORING/24DC/2X10/1X20

Redundancy module, with protective coating - QUINT-ORING/24DC/2X10/1X20
2320173

Active QUINT redundancy module for DIN rail mounting with Auto Current Balancing ACB technology and monitoring functions, input: 24 V DC, output: 24 V DC/2 x 10 A or 1 x 20 A, including mounted UTA 107/30 universal DIN rail adapter

Detalhes dos produtos

The Auto Current Balancing ACB technology of the QUINT ORING modules doubles the service life of redundantly operated power supplies by evenly utilizing the power supply units. The load current is automatically distributed symmetrically.

DC operation
Nominal input voltage range 24 V DC
Input voltage range 18 V DC ... 28 V DC (SELV)
Input voltage range DC 18 V DC ... 28 V DC (SELV)
Voltage type of supply voltage DC
Reverse polarity protection < yes60 V
Maximum current Imax 2x 15 A (-25°C ... 40°C)
1x 30 A (-25°C ... 40°C)
60 A (12 ms, SFB Technology)
Transient surge protection Varistor
Voltage drop, input/output 0.1 V (IOUT = 20 A)
Efficiency > 98 %
Nominal output voltage 0.1 V (< DC input)
Output voltage UIn -
Nominal output current (IN) 20 A (Increasing power)
10 A (Redundancy)
Derating 60 °C ... 70 °C (2.5%/K)
Protection against overvoltage at the output (OVP) < 32 V DC
Power loss nominal load max. 2 W (IOUT = 20 A)
Connection in series No
Signal: Redundancy OK, 13/14
Output description Group contact
Maximum switching voltage max. 30 V AC/DC
Maximum inrush current ≤ 100 mA (short-circuit-proof)
Signal: ACB (Auto Current Balancing) OK, 23/24
Output description Contact closed: Δ UIN ≤ 300 mV
Maximum switching voltage max. 30 V AC/DC
Maximum inrush current ≤ 100 mA (short-circuit-proof)
Signal: Redundancy OK, 13/14
Output description Group contact
Maximum switching voltage max. 30 V AC/DC
Maximum inrush current ≤ 100 mA (short-circuit-proof)
Signal: ACB (Auto Current Balancing) OK, 23/24
Output description Contact closed: Δ UIN ≤ 300 mV
Maximum switching voltage max. 30 V AC/DC
Maximum inrush current ≤ 100 mA (short-circuit-proof)
Input
Connection method Screw connection
Conductor cross section solid min. 0.2 mm²
Conductor cross section solid max. 4 mm²
Conductor cross section flexible min. 0.2 mm²
Conductor cross section flexible max. 2.5 mm²
Conductor cross section AWG min. 14
Conductor cross section AWG max. 12
Stripping length 8 mm
Screw thread M3
Tightening torque, min 0.5 Nm
Tightening torque max 0.6 Nm
Output
Connection method Screw connection
Conductor cross section solid min. 0.2 mm²
Conductor cross section solid max. 6 mm²
Conductor cross section flexible min. 0.2 mm²
Conductor cross section flexible max. 4 mm²
Conductor cross section AWG min. 10
Stripping length 7 mm
Screw thread M3
Tightening torque, min 0.5 Nm
Tightening torque max 0.6 Nm
Signal
Connection method Screw connection
Conductor cross section solid min. 0.2 mm²
Conductor cross section solid max. 4 mm²
Conductor cross section flexible min. 0.2 mm²
Conductor cross section flexible max. 2.5 mm²
Conductor cross section AWG min. 16
Conductor cross section AWG max. 12
Stripping length 10 mm
Screw thread M3
Tightening torque, min 0.5 Nm
Tightening torque max 0.6 Nm
Types of signaling Relay contact, floating, current limited
Signal output: Redundancy OK, 13/14
Status display LED redundancy OK
Note on status display green
Color green
Signal output: ACB (Auto Current Balancing) OK, 23/24
Status display ACB OK LED
Note on status display LED bar graph green
Color green
Note on status display LED bar graph green
Insulation voltage input, output / housing 500 V
Product type Redundancy module
MTBF (IEC 61709, SN 29500) > 1000000 h (40 °C)
Insulation characteristics
Protection class III
Degree of pollution 2
Width 32 mm
Height 130 mm
Depth 125 mm
Installation dimensions
Installation distance right/left 5 mm / 5 mm
Installation distance top/bottom 50 mm / 50 mm
Alternative assembly
Width 122 mm
Height 130 mm
Depth 35 mm
Mounting type DIN rail mounting
Assembly instructions alignable: PN ≥50%, 5 mm horizontally, 15 mm next to active components, 50 mm vertically
alignable: PN <50%, 0 mm horizontally, 40 mm vertically top, 20 mm vertically bottom
Mounting position horizontal DIN rail NS 35, EN 60715
Inflammability class in acc. with UL 94 (housing / terminal blocks) V0
Housing material Metal
Type of housing Aluminum (AlMg3)
Hood version Galvanized sheet steel, free from chrome (VI)
Housing material Steel sheet, zinc-plated
Ambient conditions
Degree of protection IP20
Ambient temperature (operation) -25 °C ... 70 °C (> 60 °C Derating: 2,5 %/K)
Ambient temperature (storage/transport) -40 °C ... 85 °C
Ambient temperature (start-up type tested) -40 °C
Maximum altitude 2000 m
Climatic class 3K3 (in acc. with EN 60721)
Max. permissible relative humidity (operation) ≤ 100 % (at 25 °C, non-condensing)
Shock 18 ms, 30g, in each space direction (according to IEC 60068-2-27)
Vibration (operation) < 15 Hz, amplitude ±2.5 mm (according to IEC 60068-2-6)
15 Hz ... 150 Hz, 2.3g tv = 90 min.
Standard – Electronic equipment for use in electrical power installations and their assembly into electrical power installations EN 50178/VDE 0160 (PELV)
Standard - Electrical safety EN 60950-1/VDE 0805 (SELV)
Standard – Safety extra-low voltage IEC 60950-1 (SELV) and EN 60204-1 (PELV)
Noxious gas test ISA-S71.04-1985 G3 Harsh Group A
UL approvals UL/C-UL listed UL 508
UL/C-UL Recognized UL 60950-1
UL ANSI/ISA-12.12.01 Class I, Division 2, Groups A, B, C, D (Hazardous Location)
Conformity/Approvals
ATEX  II 3 G  Ex ec nC IIC T4 Gc
DEKRA 20ATEX0136 X
IECEx Ex ec nC IIC T4 Gc
DEK 20.0082X
Low Voltage Directive Conformance with Low Voltage Directive 2014/35/EC
Electromagnetic compatibility Conformance with EMC Directive 2014/30/EU
EMC requirements for noise emission EN 61000-6-3
EN 61000-6-4
EMC requirements for noise immunity EN 61000-6-1
EN 61000-6-2
Noise immunity EN 61000-6-2:2005
Electrostatic discharge
Standards/regulations EN 61000-4-2
Electrostatic discharge
Contact discharge 8 kV (Test Level 4)
Discharge in air 15 kV (Test Level 4)
Comments Criterion B
Electromagnetic HF field
Standards/regulations EN 61000-4-3
Electromagnetic HF field
Frequency range 80 MHz ... 1 GHz
Test field strength 20 V/m (Test Level 3)
Frequency range 1 GHz ... 2 GHz
Test field strength 10 V/m (Test Level 3)
Frequency range 2 GHz ... 3 GHz
Test field strength 10 V/m (Test Level 3)
Comments Criterion A
Fast transients (burst)
Standards/regulations EN 61000-4-4
Fast transients (burst)
Input 2 kV (Test Level 3 - asymmetrical)
Output 2 kV (Test Level 3 - asymmetrical)
Signal 2 kV (Test Level 4 - asymmetrical)
Comments Criterion B
Surge voltage load (surge)
Standards/regulations EN 61000-4-5
Input 1 kV (Test Level 2 - symmetrical)
2 kV (Test Level 3 - asymmetrical)
Output 1 kV (Test Level 2 - symmetrical)
2 kV (Test Level 3 - asymmetrical)
Signal 1 kV (Test Level 2 - asymmetrical)
Comments Criterion B
Conducted interference
Standards/regulations EN 61000-4-6
Conducted interference
I/O/S asymmetrical
Frequency range 0.15 MHz ... 80 MHz
Comments Criterion A
Voltage 10 V (Test Level 3)
Emitted interference
Standards/regulations EN 61000-6-3
Radio interference voltage in acc. with EN 55011 EN 55011 (EN 55022) Class B, area of application: Industry and residential
Emitted radio interference in acc. with EN 55011 EN 55011 (EN 55022) Class B, area of application: Industry and residential
Criterion A Normal operating behavior within the specified limits.
Criterion B Temporary impairment to operational behavior that is corrected by the device itself.
N.º de artigo 2320173
Pcs./Emb 1 Unidade
Quantidade mínima de pedido 1 Unidade
Chave comercial CMR
Chave de produto CMRQ43
Página de catálogo Página 302 (C-4-2019)
GTIN 4046356524902
Peso por unidade (inclusive embalagem) 633,4 g
Peso por unidade (excluindo embalagem) 400 g
Número do imposto alfandegário 85049090
País de origem CN

ECLASS

ECLASS-9.0 27371010
ECLASS-10.0.1 27371010
ECLASS-11.0 27371010

ETIM

ETIM 8.0 EC000683

UNSPSC

UNSPSC 21.0 32151500

cUL Recognized

Approval ID: FILE E 211944

UL Recognized

Approval ID: FILE E 211944

EAC

Approval ID: EAC-Zulassung

DNV GL

Approval ID: TAA000011F

LR

Approval ID: 14-20005
Approval Specification Data
Tensão nominal UN Corrente nominal IN Secção transversal American Wire Gauge Secção transversal mm2
500 V 41 A - 6

NK

Approval ID: TA19447M
Approval Specification Data
Tensão nominal UN Corrente nominal IN Secção transversal American Wire Gauge Secção transversal mm2
500 V 63 A - 10

BV

Approval ID: 36077/B0 BV

EAC

Approval ID: RU S-DE.BL08.W.00764

UL Listed

Approval ID: FILE E 123528

cUL Listed

Approval ID: FILE E 123528

RINA

Approval ID: ELE362819XG

ABS

Approval ID: 20-2022537-PDA

ATEX

Approval ID: DEKRA 20ATEX0136 X

EAC Ex

Approval ID: RU C-DE.HB49.B.00004

IECEx

Approval ID: IECEx DEK 20.0082X

CCC

Approval ID: 2021322303003736

NEPSI

Approval ID: GYJ21.1003X

cUL Listed

Approval ID: FILE E 199827

UL Listed

Approval ID: FILE E 199827

INMETRO

Approval ID: DNV 19.0185 X

cULus Recognized

cULus Listed

cULus Listed

REACh SVHC Lead 7439-92-1
China RoHS Environmentally Friendly Use Period = 25;
For information on hazardous substances, refer to the manufacturer’s declaration available under “Downloads”

Produtos compatíveis

Vantagens

Service life of the redundant solution is doubled, thanks to uniform distribution of the load
Save energy
Permanent monitoring of redundancy
Consistent redundancy up to the load