HC-M-02-AT-M-35 - Contact insert module

1417392

Contact insert module, number of positions: 2, power contacts: 2, control contacts: 0, Pin, Axial screw connection, 1000 V, 100 A, 10 mm² ... 35 mm², application: Power

Detalhes dos produtos

General	For HEAVYCON HC-B6 to B48 housing, snap-in module frame required, axial connection for 4 mm Allen key
General	Connectors may be operated only when there is no load/voltage.
General	The axial screw connection must be established using a 4 mm Allen key (for stranded conductors only)

Assembly note	To ensure correct use, installation in housing with IP54 protection or better is required
	Note regarding axial connection technology: Only for stranded wires. The specified conductor cross-sections refer to the geometric cross section of the cable used. Cables with a geometric cross section which deviates significantly from the nominal cable cross section must be checked before use. The axial connection technology connection space is designed for fine strand cables according to VDE 0295 Class 5. Deviating cable structures (e.g., Class 6 cables) must be checked before use. Assembly instructions Before assembly, ensure that the tapered screw is fully loosened (chamber is open). Cables must not be twisted. The wires must be pushed into the contact chamber as far as they will go (until the insulation touches the contact). Hold the wires in position and tighten using an Allen key. The used wire end must be cut off before reconnection. The terminal screw must only be retightened once to prevent the litz wires from breaking. To prevent damage to the contact, the wire/cable must be mechanically held at an appropriate distance from the connection point (e.g., when used in a plate cut out). For notes on correct execution, see DIN VDE 0100-520:2003-06. Unused connections must be tightened with maximum torque.
Hexagonal socket	SW 4

Product type	Modular contact insert
Series	HC-M-HS
Application	Power
Number of positions	2
Connection profile	2
Contact numbering	1 - 2
Number of module slots	2
No. of power contacts	2
No. of control contacts	0
Contact material type	turned
Insulation characteristics
Overvoltage category	III
Degree of pollution	3

Connection technology
Connection technology	Axial screw connection
Conductor connection
Conductor cross section	10 mm² ... 35 mm² (The cross section specification refers to the geometric cross section of the cable used)
Connection cross section AWG	8 ... 2
Tightening torque	6 Nm (10 mm² ... 16 mm²)
	7 Nm (25 mm²)
	8 Nm (35 mm²)
Stripping length of the individual wire	14 mm (with an outside conductor diameter up to 9 mm)
	16 mm (with an outside conductor diameter up to 11.5 mm)

Dimensional drawing
Width	34.2 mm
Height	49 mm
Length	29.4 mm
Mechanical characteristics
Minimum housing height	72 mm
Contact diameter	8 mm

Rated voltage (III/3)	1000 V
Rated surge voltage (III/2)	8 kV
Rated surge voltage (III/3)	8 kV
Rated surge voltage	8 kV
Rated current	100 A

Mechanical data
Insertion/withdrawal cycles	≥ 500

Flammability rating according to UL 94	V0
Contact material	Copper alloy
Contact surface material	Ag
Contact carrier material	PC
Standards/regulations	PC

Ambient conditions
Ambient temperature (operation)	-40 °C ... 125 °C

Testing
Standards/regulations	PC: Fire protection in rail vehicles - requirement sets R22, R23, and R24 acc. to DIN EN 45545-2 (Risk level HL1 - HL3)

Dados comerciais

N.º de artigo	1417392
Pcs./Emb	2 Unidade
Quantidade mínima de pedido	2 Unidade
Chave comercial	AF7
Chave de produto	AF7ACE
GTIN	4055626112718
Peso por unidade (inclusive embalagem)	67,5 g
Peso por unidade (excluindo embalagem)	66,83 g
Número do imposto alfandegário	85366990
País de origem	PL

Classificações

Certificações

Approval Specification Data
	Tensão nominal U_N	Corrente nominal I_N	Secção transversal American Wire Gauge	Secção transversal mm²
keine
	600 V	100 A	- 2

Approval Specification Data
	Tensão nominal U_N	Corrente nominal I_N	Secção transversal American Wire Gauge	Secção transversal mm²
keine
	600 V	127 A	- 2

Approval Specification Data
	Tensão nominal U_N	Corrente nominal I_N	Secção transversal American Wire Gauge	Secção transversal mm²
keine
	1000 V	100 A	- 2

Environmental product compliance

Produtos compatíveis

Acessórios

Phoenix Contact S.A.

Sintra Business Park, Edifício n°1 Zona Industrial da Abrunheira, sala 0M, 2710-089 SINTRA

Fazer uma pergunta (+351) 21 911 2760 pt-info@phoenixcontact.com

ECLASS-13.0	27440217
ECLASS-15.0	27440217

EU RoHS
Cumpre os requisitos de substância segundo a Diretiva RoHS	Sim (Sem regras de exceção)
China RoHS
Environment friendly use period (EFUP)	EFUP-E Nenhuma substância perigosa acima dos valores-limite
EU REACH SVHC
Nota sobre as substâncias candidatas ao REACH (n.º CAS)	Nenhuma substância numa proporção superior a 0,1 % em massa
EF3.0 Alterações climáticas
CO2e kg	0,343 kg CO2e

Automate

Connect

Mark, assemble, and install

Supply, charge, and protect

Switch, Measure and Monitor

HC-M-02-AT-M-35 - Contact insert module

1417392

Detalhes dos produtos

ECLASS

ETIM

UNSPSC

DNV

CSA

UL Recognized

cULus Recognized

Produtos compatíveis

Automate

Connect

Mark, assemble, and install

Supply, charge, and protect

Switch, Measure and Monitor

HC-M-02-AT-M-35 - Contact insert module 1417392

Detalhes dos produtos

ECLASS

ETIM

UNSPSC

Produtos compatíveis

HC-CBU-MOD - Coding element 1636130

HC-CST-MOD - Coding element 1636127

HC-M-MHR-PE16 - Cable lug 1636981

HC-M-B06-MFH-B - Module carrier frame 1182085

HC-M-B10-MFH-B - Module carrier frame 1182088

HC-M-B16-MFH-B - Module carrier frame 1182090

HC-M-B24-MFH-B - Module carrier frame 1182094

HC-M-B06-MFH-H - Module carrier frame 1182087

HC-M-B10-MFH-H - Module carrier frame 1182089

HC-M-B16-MFH-H - Module carrier frame 1182093

HC-M-B24-MFH-H - Module carrier frame 1182095

HC-M-02-AT-F-35 - Contact insert module 1417390

SF-BIT-HEX 4-89 S - Screw insert 1200302

SF-THEX 4-150 - Screwdriver 1212640

Pesquisado com frequência

HC-M-02-AT-M-35 - Contact insert module

1417392