HC-DD42-I-CT-M - Contact insert

1584059

Contact insert, number of positions: 42+PE, size: B10, number of connections per position: 1, Pin, Crimp connection, 250 V, 10 A, 0.14 mm² ... 2.5 mm², application: Signal

Detalhes dos produtos

General	For housing HC-B10
General	Connectors may be operated only when there is no load/voltage.
General	It is imperative that guide pins (HC-CST) and sockets (HC-CBU) are used to prevent tip collision due to misalignment.

Assembly note	To ensure correct use, installation in housing with IP54 protection or better is required

Product type	Contact insert with a fixed no. of positions
Series	HC-DD
Application	Signal
Type	B10
Number of positions	42
Connection profile	42+PE
Contact numbering	1 - 42
Number of connections per position	1
Contact material type	turned
	rolled
Insulation characteristics
Overvoltage category	III
Degree of pollution	3

Dimensional drawing
Width	34 mm
Height	32.5 mm
Length	64 mm
Drill hole distance, horizontal	57 mm
Drill hole distance, vertical	27 mm
Mechanical characteristics
Minimum housing height	72 mm
Contact diameter	1.6 mm

Connection technology
Connection technology	Crimp connection
Number of connections per position	1
Connection in acc. with standard	IEC / EN
Conductor connection
Conductor cross section	0.14 mm² ... 2.5 mm²
Connection cross section AWG	26 ... 14
Tightening torque	0.8 Nm ... 1.2 Nm (PE connection)
	0.5 Nm ... 0.8 Nm (Mounting screws for mounting in the HEAVYCON housing)
Stripping length of the individual wire	8 mm (0.14 mm² ... 1.5 mm²)
	6 mm (2.5 mm²)

Rated voltage (III/3)	250 V
Rated surge voltage	4 kV
Rated current	10 A
SCCR	5 kA (UL 2237)

Mechanical data
Insertion/withdrawal cycles	≥ 500

Flammability rating according to UL 94	V0
Contact material	Copper alloy
Contact surface material	Ag (alternatively Au)
Contact carrier material	PC
Standards/regulations	PC

Ambient conditions
Ambient temperature (operation)	-40 °C ... 125 °C (including heating up of contacts)

Constructional and testing regulations	DIN VDE 0627/86
	DIN VDE 0110/02.79
	DIN VDE 0110-1/04.97
	IEC 60664-1, DIN IEC 60512
	IEC 60352
Tests	DIN VDE 0627/86
	DIN VDE 0110/02.79
	DIN VDE 0110-1/04.97
	IEC 60664-1, DIN IEC 60512
	IEC 60352
Testing
Standards/regulations	PC: Fire protection in rail vehicles - requirement sets R22, R23, and R24 acc. to DIN EN 45545-2 (Risk level HL1 - HL3)

Dados comerciais

N.º de artigo	1584059
Pcs./Emb	1 Unidade
Quantidade mínima de pedido	1 Unidade
Chave comercial	AF7
Chave de produto	AF7ABF
GTIN	4046356133364
Peso por unidade (inclusive embalagem)	43,2 g
Peso por unidade (excluindo embalagem)	43,2 g
Número do imposto alfandegário	85389099
País de origem	CN

Classificações

Certificações

Approval Specification Data
	Tensão nominal U_N	Corrente nominal I_N	Secção transversal American Wire Gauge	Secção transversal mm²
keine
	250 V	7 A	26 - 14

Approval Specification Data
	Tensão nominal U_N	Corrente nominal I_N	Secção transversal American Wire Gauge	Secção transversal mm²
keine
	250 V	7 A	- 14

Approval Specification Data
	Tensão nominal U_N	Corrente nominal I_N	Secção transversal American Wire Gauge	Secção transversal mm²
keine
	250 V	10 A	- 14

Approval Specification Data
	Tensão nominal U_N	Corrente nominal I_N	Secção transversal American Wire Gauge	Secção transversal mm²
keine
	250 V	7 A	- 14

Environmental product compliance

Produtos compatíveis

Acessórios

Vantagens

Can be used in rail vehicles, satisfy DIN EN 45545-2 with requirement sets R22, R23, and R24 in hazard levels HL1, HL2, and HL3.

Shock and vibration-resistant in accordance with DIN EN 61373

Phoenix Contact S.A.

Sintra Business Park, Edifício n°1 Zona Industrial da Abrunheira, sala 0M, 2710-089 SINTRA

Fazer uma pergunta (+351) 21 911 2760 pt-info@phoenixcontact.com

ECLASS-13.0	27440205
ECLASS-15.0	27440205

EU RoHS
Cumpre os requisitos de substância segundo a Diretiva RoHS	Sim (Sem regras de exceção)
China RoHS
Environment friendly use period (EFUP)	EFUP-E Nenhuma substância perigosa acima dos valores-limite
EU REACH SVHC
Nota sobre as substâncias candidatas ao REACH (n.º CAS)	Nenhuma substância numa proporção superior a 0,1 % em massa

Automate

Connect

Mark, assemble, and install

Supply, charge, and protect

Switch, Measure and Monitor

HC-DD42-I-CT-M - Contact insert

1584059

Detalhes dos produtos

ECLASS

ETIM

UNSPSC

DNV

CSA

cUL Recognized

UL Recognized

cULus Recognized

Produtos compatíveis

Vantagens

Automate

Connect

Mark, assemble, and install

Supply, charge, and protect

Switch, Measure and Monitor

HC-DD42-I-CT-M - Contact insert 1584059

Detalhes dos produtos

ECLASS

ETIM

UNSPSC

Produtos compatíveis

HC-CST - Coding element 1676857

HC-CBU - Coding element 1676860

HC-B-PE-PT - Adapter 1054672

HC-B-2PE-PT - PE multiplier 1054675

HC-B-3PE - PE multiplier 1644326

HC-B-PES - Screw 1604997

HC-B-ZG - Strain relief clamp 1685327

HC-B-ZS - Strain relief clamp 1685330

HC-CIF-B10-HFWL-PL - DIN rail mounting frame 1424335

HC-B 10-ANDOCK - Docking frame 1586125

HC-CIF-B06-24-BFAFL-PL - DIN rail mounting frame 1424338

HC-B24/10-ADP-SS - Adapter plate 1034213

CK1,6-ED-0,37ST AG - Crimp contact 1663336

CK1,6-ED-0,50ST AG - Crimp contact 1663349

CK1,6-ED-0,75ST AG - Crimp contact 1663352

CK1,6-ED-1,00ST AG - Crimp contact 1663365

CK1,6-ED-1,50ST AG - Crimp contact 1663378

CK1,6-ED-2,50ST AG - Crimp contact 1663381

CK1,6-ED-ST-POF - Pin contact 1884995

CK1,6-ED-0,37M AG - Crimp contact 1266193

CK1,6-ED-0,50M AG - Crimp contact 1266195

CK1,6-ED-1,50M AG - Crimp contact 1266245

CK1,6-ED-0,75M AG - Crimp contact 1266450

CK1,6-ED-1,00M AG - Crimp contact 1266244

CK1,6-ED-2,50M AG - Crimp contact 1266247

CK1,6-ED-0,37ST AU - Crimp contact 1674901

CK1,6-ED-0,50ST AU - Crimp contact 1672453

CK1,6-ED-0,75ST AU - Crimp contact 1674914

CK1,6-ED-1,00ST AU - Crimp contact 1674888

CK1,6-ED-1,50ST AU - Crimp contact 1674875

CK1,6-ED-2,50ST AU - Crimp contact 1674927

CK1,6-ED-0,37M AU - Crimp contact 1266267

CK1,6-ED-0,50M AU - Crimp contact 1266270

CK1,6-ED-1,50M AU - Crimp contact 1266276

CK1,6-ED-0,75M AU - Crimp contact 1266272

CK1,6-ED-1,00M AU - Crimp contact 1266274

CK1,6-ED-2,50M AU - Crimp contact 1266278

CK1,6-ER-1,00ST OIC AG - Crimp contact 1004360

CK1,6-ER-2,50ST OIC AG - Crimp contact 1004365

CK1,6-BR-1,00ST OIC AG - Crimp contact 1004380

CK1,6-BR-2,50ST OIC AG - Crimp contact 1004382

HC-DD42-I-CT-F - Contact insert 1584062

UNIFOX MT-CK 1.6/2.5 - Assembly tool 1089092

UNIFOX RT-CK 1.6 - Contact removal tool 1072069

Vantagens

Pesquisado com frequência

HC-DD42-I-CT-M - Contact insert

1584059