Monitoring relay - EMD-BL-PTC-PT
2906253

Temperature monitoring of the motor winding (maximum 6 PTCs) for temperature sensors according to DIN 44081 and DIN 44082 with short-circuit monitoring of the thermistor circuit, with push-in connection.


Detalhes dos produtos


Safety and system availability requirements are constantly on the increase – across all industries. Processes are becoming more and more complex, not only in machine building and the chemical industry but also in building technology. The demands placed on energy technology are also constantly on the rise.
It is only by continuously monitoring key network and system parameters that error-free and therefore cost-effective operation can be achieved. Electronic monitoring relays from the EMD series are available for a wide range of monitoring tasks so that the consequences of errors can be avoided or kept within limits.
The operating states are signaled via color LEDs and any errors that occur can be sent to a controller via a floating contact or can shut down a section of the system. All device versions are equipped with response delays so that measured values outside the set monitoring range can be briefly tolerated.



Product type Temperature monitoring relay
Operating mode 100% operating factor
Mechanical service life 15x 106 cycles
Insulation characteristics
Overvoltage category III
Pollution degree 2

Service life electrical 1x 105 cycles
Rated surge voltage 4 kV
Supply
Supply voltage 230 V AC (-15 % ... +10 %)
Supply voltage range 195.5 V AC ... 253 V AC
Nominal power consumption 3.5 VA (0.5 W)

Input name Measuring input
Maximum input voltage 4 V DC (connection terminal blocks: T1 and T2)
Frequency range 50 Hz ... 60 Hz
Maximum temperature coefficient < 0.05 %/K
Response delay < 100 ms
Switch-on delay < 450 ms
Response value ≥ 3.6 kΩ (Relay drops out)
Function Winding temperature monitoring
Basic accuracy ± 10 % (of scale end value)
Total cold resistance ≤ 1.5 kΩ
Release value ≤ 1.6 kΩ (Relay picks up)
Short-circuit detection < 20 Ω
Recovery time > 300 ms
Control
Reset Autoreset

Switching
Contact type 1 floating changeover contact
Maximum switching voltage 250 V AC (in acc. with IEC 60947-5-1)
Interrupting rating (ohmic load) max. 1250 VA (5 A / 250 V AC)
Output fuse 5 A (fast-blow)

Connection method Push-in connection
Stripping length 8 mm
Conductor cross section solid 0.14 mm² ... 2.5 mm²
Conductor cross section flexible 0.14 mm² ... 2.5 mm²
Conductor cross section AWG 26 ... 14

Width 17.5 mm
Height 89.5 mm
Depth 65.5 mm

Housing insulation material Polyamide PA 6.6, self-extinguishing

Ambient conditions
Degree of protection IP40 (Housing)
IP20 (Connection terminal blocks)
Ambient temperature (operation) -25 °C ... 55 °C
Ambient temperature (storage/transport) -25 °C ... 70 °C
Permissible humidity (operation) 15 % ... 85 %

CE
Certificate CE-compliant

Low Voltage Directive Conformance with Low Voltage Directive
Electromagnetic compatibility Conformance with EMC directive
Noise emission EN 61000-6-3
Noise immunity EN 61000-6-2

Standards/regulations IEC 60947-5-1

Mounting type DIN rail mounting
Assembly instructions on standard DIN rail NS 35 in accordance with EN 60715
Mounting position any

N.º de artigo 2906253
Pcs./Emb 1 Unidade
Quantidade mínima de pedido 1 Unidade
Chave comercial CK4
Chave de produto CK4211
Página de catálogo Página 248 (C-5-2019)
GTIN 4055626053745
Peso por unidade (inclusive embalagem) 72 g
Peso por unidade (excluindo embalagem) 72 g
Número do imposto alfandegário 85364900
País de origem AT


ECLASS

ECLASS-9.0 27371810
ECLASS-10.0.1 27371810
ECLASS-11.0 27371810

ETIM

ETIM 8.0 EC001446

UNSPSC

UNSPSC 21.0 39121100

EAC

Approval ID: TR_TS_D_00573_c

EAC

Approval ID: RU*C-DE.*08.B.00010

China RoHS Environmentally friendly use period: unlimited = EFUP-e
No hazardous substances above threshold values