Temperature measuring transducer: converts signals from resistance thermometers and remote resistance-type sensors in 2-, 3- and 4-conductor connection technology to a linear 0/4 mA ... 20 mA signal and transmits this to a load. The output can be operated either actively or passively via switches. The measuring transducer is installed on a corresponding VIP I/O marshalling base element by means of plug-in contact. Parameterization can be carried out via a free software solution. A USB interface under the housing cover establishes communication with the PC.
IOA MCR-RTD-I
-
Temperature measuring transducer
1007728
Temperature transducer for VIP I/O marshalling base elements: converts signals from resistance temperature detectors and transmits a 0/4 mA ... 20 mA signal to a load (active or passive). Freely configurable.
Este produto precisa de outros produtos para a operação.
Acessórios necessários
Detalhes dos produtos
cULus Listed
ID de certificação: E199827cULus Listed
ID de certificação: E199827
Vantagens
Programming possible during operation, when measuring circuit is connected, and also when power is switched off using the IFS-USB-PROG-ADAPTER programming adapter
Input for resistance thermometers and resistance-type sensors
Installation in zone 2, protection type "ec" (EN 60079-7) permitted
3-way electrical isolation
Status indicator for supply voltage, cable, sensor, and module errors
Output: 0 mA ... 20 mA or 4 mA ... 20 mA