FL SWITCH EP6504-4GSFP-RED-LV - Industrial Ethernet Switch - 1717780

Note on application
Note on application	Only for industrial use

Housing material	Metal

Mounting type	DIN rail mounting

Ethernet
Connection method	RJ45
Note on the connection method	Auto negotiation and autocrossing
Transmission speed	10/100/1000 Mbps
Transmission physics	Copper
Transmission length	100 m (per segment)
No. of channels	4 (RJ45 ports)
Ethernet (SFP)
Connection method	SFP
Transmission speed	100/1000 Mbps (full duplex)
Transmission physics	Depending on the SFP module
No. of channels	4 (SFP ports)
HSR/PRP Combo Ports
Connection method	SFP/RJ45
Transmission speed	10/100/1000 Mbps
	100/1000 Mbps
No. of channels	4 (HSR/PRP combo ports)

Digital:
Output name	Alarm relay output: 24 V DC, 1 A maximum

Product type	Switch
Product family	Managed Switch EP6000
Insulation characteristics
Overvoltage category	II
Degree of pollution	2
Switch functions
Diagnostic functions	SysLog
Signal contact control voltage	24 V DC
Signal contact control current	1 A
NAT functions	1:1-NAT
Filter functions	Link Aggregation
IP parameterization	DHCP Option 82
MAC address table	16k
Management	SNMPv1/v2/v3
	Port mirroring
	SSHv2
	Telnet
	MIB support
Redundancy	HSR
	PRP
	RSTP
Status and diagnostic indicators	LEDs: POWER, ERROR, Link status
Time synchronization	IEEE 1588v2 (PTP)
Security functions
Authentication	RADIUS Authentication
	TACACS+ Authentication
	ACLs (Access Control Lists)
Dynamic Host Configuration Protocol (DHCP) support	Client, Server and Relay
Firewall rules	Configurable stateful inspection firewall
Link Layer Discovery Protocol (LLDP)	IEEE 802.1AB

Local diagnostics	Power Supply voltage Green LED
	Error Alarm signal LED red
Maximum power dissipation for nominal condition	max. 50 W
Transmission medium	Copper
	depending on the SFP module used
Supply
Supply voltage (DC)	24 V DC (Redundant DC power supplies are load sharing)
Supply voltage range	10 V DC ... 36 V DC
Function
Signal contact control voltage	24 V DC
Signal contact control current	1 A

Connection method	Screw connection

Ambient conditions
Degree of protection	IP20
Ambient temperature (operation)	-40 °C ... 85 °C (Type tested to 85 °C for 16 hours)
Ambient temperature (storage/transport)	-40 °C ... 85 °C
Permissible humidity (operation)	5 % ... 95 % (non-condensing)
Permissible humidity (storage/transport)	10 % ... 95 % (non-condensing)

Conformity/Approvals
Conformance	CE-compliant

Noise immunity	IEC 61850-3, IEEE 1613, EN 61000-6-2: 2005

Status display	LEDs: POWER, ERROR, Link status

N.º de artigo	1717780
Pcs./Emb	1 Unidade
Quantidade mínima de pedido	1 Unidade
Chave comercial	DNN
Chave de produto	DNN512
GTIN	4067923267992
Peso por unidade (inclusive embalagem)	2 593 g
Peso por unidade (excluindo embalagem)	1 963 g
Número do imposto alfandegário	85176200
País de origem	CA

EU RoHS
Cumpre os requisitos de substância segundo a Diretiva RoHS	Sim
isenções tanto quanto conhecido	6(c), 7(a), 7(c)-I, 7(c)-II
China RoHS
Environment friendly use period (EFUP)	EFUP-50 Uma lista de declaração de acordo com a RoHS da China relativa a artigos encontra-se na área de transferências do respetivo artigo, em "Declaração do fabricante". Para todos os artigos com EFUP-E não é emitida nem necessária uma tabela de declaração de acordo com a RoHS da China.
EU REACH SVHC
Nota sobre as substâncias candidatas ao REACH (n.º CAS)	1-Methyl-2-pyrrolidone (NMP) (n.º CAS: 872-50-4)
		N,N-dimethylacetamide (n.º CAS: 127-19-5)
		1, 2-dimethoxyethane; ethylene glycol dimethyl ether (EGDME) (n.º CAS: 110-71-4)
		Hexahydromethylphthalic anhydride (n.º CAS: Não aplicável)
		Lead titanium zirconium oxide (n.º CAS: 12626-81-2)
		Lead titanium trioxide (n.º CAS: 12060-00-3)
		4,4'-isopropylidenediphenol (n.º CAS: 80-05-7)
		Terphenyl, hydrogenated (n.º CAS: 61788-32-7)
		Lead (n.º CAS: 7439-92-1)
		2-methyl-1-(4-methylthiophenyl)-2-morpholinopropan-1-one (n.º CAS: 71868-10-5)

ECLASS-13.0	19170401
ECLASS-15.0	19170401

FL SWITCH EP6504-4GSFP-RED-LV - Industrial Ethernet Switch

1717780