HSCH 2,5-2U-TT22 THR 9005 - PCB header

1091997

PCB headers, nominal cross section: 2.5 mm², color: black, nominal current: 8 A, rated voltage (III/2): 250 V, contact surface: Sn, contact connection type: Pin, number of rows: 2, mounting: THR soldering, number of solder pins per potential: 1, plug-in system: HSC 2,5, Pin connector pattern alignment: Standard, locking: without, mounting method: without, Partially assembled version

Este produto precisa de outros produtos para a operação. Acessórios necessários

Detalhes dos produtos

Product type	PCB headers
Product family	HSCH 2,5/..-G-THR
Type	Component suitable for through hole reflow
Number of rows	2
Solder pins per potential	1

Properties
Nominal current I_N	8 A
Nominal voltage U_N	250 V
Contact resistance	1.7 mΩ
Rated voltage (III/3)	160 V
Rated surge voltage (III/3)	4 kV
Rated voltage (III/2)	250 V
Rated surge voltage (III/2)	4 kV
Rated voltage (II/2)	320 V
Rated surge voltage (II/2)	4 kV

Mounting type	THR soldering
Processing notes
Moisture Sensitive Level	MSL 1
Classification temperature T_c	260 °C
Solder cycles in the reflow	3

Material data - contact
Note	WEEE/RoHS-compliant, free of whiskers according to IEC 60068-2-82/JEDEC JESD 201
Contact material	Cu alloy
Surface characteristics	Tin-plated
Metal surface contact area (top layer)	Tin (2 - 4 µm Sn)
Metal surface soldering area (top layer)	Tin (2 - 4 µm Sn)
Metal surface soldering area (middle layer)	Nickel (1.3 - 3 µm Ni)
Material data - housing
Color (Housing)	black (9005)
Insulating material	LCP
Insulating material group	IIIb
CTI according to IEC 60112	150
Flammability rating according to UL 94	V0
Glow wire flammability index GWFI according to EN 60695-2-12	850
Glow wire ignition temperature GWIT according to EN 60695-2-13	775
Temperature for the ball pressure test according to EN 60695-10-2	125 °C

Assembly note	Please observe the application note in the download area.
Safety note
Safety note	WARNING: The connectors may not be plugged in or disconnected under load. Ignoring the warning or improper use may damage persons and/or property.
	• WARNING: Commission properly functioning products only. The products must be regularly inspected for damage. Decommission defective products immediately. Replace damaged products. Repairs are not possible.
	• WARNING: Only electrically qualified personnel may install and operate the product. They must observe the following safety notes. The qualified personnel must be familiar with the basics of electrical engineering. They must be able to recognize and prevent danger. The relevant symbol on the packaging indicates that only personnel familiar with electrical engineering are allowed to install and operate the product.
	• The item is intended to be an unencapsulated plug for installation in a housing.
	• Operate the connector only when it is fully plugged in.

Pitch	5 mm
Pin dimensions	0.8 x 0.8 mm

Visual inspection
Specification	IEC 60512-1-1:2002-02
Result	Test passed
Dimension check
Specification	IEC 60512-1-2:2002-02
Result	Test passed
Resistance of inscriptions
Specification	IEC 60068-2-70:1995-12
Result	Test passed
Polarization and coding
Specification	IEC 60512-13-5:2006-02
Result	Test passed
Contact holder in insert
Specification	IEC 60512-15-1:2008-05
Contact holder in insert Requirements >20 N	Test passed
Insertion and withdrawal forces
Result	Test passed
No. of cycles	25
Insertion strength per pos. approx.	4 N
Withdraw strength per pos. approx.	3 N

Thermal test \| Test group C
Specification	IEC 60512-5-1:2002-02
Tested number of positions	32
Insulation resistance
Specification	IEC 60512-3-1:2002-02
Insulation resistance, neighboring positions	> 5 MΩ
Air clearances and creepage distances \|
Specification	IEC 60664-1:2007-04
Insulating material group	IIIb
Comparative tracking index (IEC 60112)	CTI 150
Rated insulation voltage (III/3)	160 V
Rated surge voltage (III/3)	4 kV
minimum clearance value - non-homogenous field (III/3)	3 mm
minimum creepage distance (III/3)	2.5 mm
Rated insulation voltage (III/2)	250 V
Rated surge voltage (III/2)	4 kV
minimum clearance value - non-homogenous field (III/2)	3 mm
minimum creepage distance (III/2)	2.5 mm
Rated insulation voltage (II/2)	320 V
Rated surge voltage (II/2)	4 kV
minimum clearance value - non-homogenous field (II/2)	3 mm
minimum creepage distance (II/2)	3.2 mm

Vibration test
Specification	IEC 60068-2-6:2007-12
Frequency	10 - 150 - 10 Hz
Sweep speed	1 octave/min
Amplitude	0.35 mm (10 Hz ... 60.1 Hz)
Acceleration	5g (60.1 Hz ... 150 Hz)
Test duration per axis	2.5 h
Test directions	X-, Y- and Z-axis
Durability test
Specification	IEC 60512-9-1:2010-03
Impulse withstand voltage at sea level	4.8 kV
Contact resistance R₁	1.7 mΩ
Contact resistance R₂	1.9 mΩ
Insertion/withdrawal cycles	25
Insulation resistance, neighboring positions	> 5 MΩ
Climatic test
Specification	ISO 6988:1985-02
Corrosive stress	0.2 dm³SO₂on 300 dm³/40 °C/1 cycle
Thermal stress	100 °C/168 h
Power-frequency withstand voltage	1.39 kV
Ambient conditions
Ambient temperature (operation)	-40 °C ... 105 °C (dependent on the derating curve)
Ambient temperature (storage/transport)	-40 °C ... 55 °C
Relative humidity (storage/transport)	30 % ... 70 %
Ambient temperature (assembly)	-5 °C ... 100 °C

Dados comerciais

N.º de artigo	1091997
Pcs./Emb	150 Unidade
Quantidade mínima de pedido	150 Unidade
Chave comercial	ACH
Chave de produto	ACHECB
GTIN	4055626906171
Peso por unidade (inclusive embalagem)	99,99 g
Peso por unidade (excluindo embalagem)	99,99 g
Número do imposto alfandegário	85366930
País de origem	PL

Classificações

Certificações

Approval Specification Data
	Tensão nominal U_N	Corrente nominal I_N
B
	150 V	8 A
F
	250 V	8 A
D
	300 V	8 A

Approval Specification Data
	Tensão nominal U_N	Corrente nominal I_N	Secção transversal American Wire Gauge	Secção transversal mm²
keine
	630 V	8 A

Environmental product compliance

Produtos compatíveis

Acessórios necessários

Acessórios

Vantagens

Partially equipped version for application-specific position layouts

Phoenix Contact S.A.

Sintra Business Park, Edifício n°1 Zona Industrial da Abrunheira, sala 0M, 2710-089 SINTRA

Fazer uma pergunta (+351) 21 911 2760 pt-info@phoenixcontact.com

ECLASS-13.0	27460201
ECLASS-15.0	27460201

EU RoHS
Cumpre os requisitos de substância segundo a Diretiva RoHS	Sim (Sem regras de exceção)
China RoHS
Environment friendly use period (EFUP)	EFUP-E Nenhuma substância perigosa acima dos valores-limite
EU REACH SVHC
Nota sobre as substâncias candidatas ao REACH (n.º CAS)	Nenhuma substância numa proporção superior a 0,1 % em massa

Automate

Connect

Mark, assemble, and install

Supply, charge, and protect

Switch, Measure and Monitor

HSCH 2,5-2U-TT22 THR 9005 - PCB header

1091997

Detalhes dos produtos

ECLASS

ETIM

UNSPSC

cULus Recognized

VDE Zeichengenehmigung

Produtos compatíveis

Vantagens

Automate

Connect

Mark, assemble, and install

Supply, charge, and protect

Switch, Measure and Monitor

HSCH 2,5-2U-TT22 THR 9005 - PCB header 1091997

Detalhes dos produtos

ECLASS

ETIM

UNSPSC

Produtos compatíveis

HSCP-SP 2,5-1U4-33/33-7016 - PCB connector 1037429

HSCP-SP 2,5-1U02-7035 - PCB connector 1081099

HSCP-SP 2,5-1U4-62/62-7035 - PCB connector 1081107

HSCP-SP 2,5-1U4-55/66-7035 - PCB connector 1111838

HSCP-SP 2,5-1U4-22/44-7035 - PCB connector 1111839

HSCP-SP 2,5-1UTT-02/02-7035 - PCB connector 1135246

HSCP-SP 2,5-1U00-7016 - Filler plug 1205130

HSCP-SP 2,5-1UTT-7016 - PCB connector 1209685

HSCP-SP 2,5-1U4-99/99-9005 - PCB connector 1211074

HSCP-SP 2,5-1U4-00/22-9005 - PCB connector 1211075

HSCP-SP 2,5-1U4-62/62-9005 - PCB connector 1487511

HSCP-SP 2,5-1UTT-5015 - PCB connector 1497099

HSCP-SP 2,5-1U4-7035 - PCB connector 2201780

HSCP-SP 2,5-1UTT-7035 - PCB connector 2201781

HSCP-SP 2,5-1U20-7035 - PCB connector 2201782

HSCP-SP 2,5-1U4-44/44-7035 - PCB connector 2202567

HSCP-SP 2,5-1U4-99/99-7035 - PCB connector 2202568

HSCP-SP 2,5-1U4-00/00-7035 - PCB connector 2202569

HSCP-SP 2,5-1U4-66/66-7035 - PCB connector 2202570

HSCP-SP 2,5-1U4-55/55-7035 - PCB connector 2202571

HSCP-SP 2,5-1U4-22/22-7035 - PCB connector 2202572

HSCP-SP 2,5-1U4-69/69-7035 - PCB connector 2202605

HSCP-SP 2,5-1UTT-62/62-7035 - PCB connector 2202606

HSCP-SP 2,5-1UTT-55/55-7035 - PCB connector 2202607

HSCP-SP 2,5-1U4-99/62-7035 - PCB connector 2202608

HSCP-SP 2,5-1U00-7035 - Filler plug 2202610

HSCP-SP 2,5-1U4-29/29-7035 - PCB connector 2203192

HSCP-SP 2,5-1U4-62/59-7035 - PCB connector 2203194

HSCP-SP 2,5-1U4-65/65-7035 - PCB connector 2203195

CP-DMC 1,5 NAT - Coding profile 1790647

MPS-MT 1-S4-B RD - Accessories 1982800

CRIMPFOX 6 - Crimping pliers 1212034

SZS 0,4X2,5 VDE - Screwdriver 1205037

HSCP-CB 2U-7035 - Fastening clip 1056724

HSCP-CB 3U-7035 - Fastening clip 1056723

HSCP-CB 4U-7035 - Fastening clip 1056722

HSCP-CB 5U-7035 - Fastening clip 1056892

HSCP-CB 6U-7035 - Fastening clip 1037100

HSC-LR 9U KIT 2003 - Locking 2201794

HSC-LR 9U 2003 VPE100 - Locking 1643174

HSC-LR 9U KIT 1018 - Locking 1090370

HSC-LR 9U KIT 3001 - Locking 1090364

HSC-LR 9U KIT 5015 - Locking 2203851

HSC-LR 9U KIT 6021 - Locking 1142357

HSC-LR 9U KIT 9005 - Locking 1090360

HSC-LR 9U KIT 9010 - Locking 1090355

HSC-LR 7U KIT 2003 - Locking 2201795

HSC-LR 7U KIT 1018 - Locking 1090368

HSC-LR 7U KIT 3001 - Locking 1090363

HSC-LR 7U KIT 5015 - Locking 2203850

HSC-LR 7U KIT 6021 - Locking 1142183

HSC-LR 7U KIT 9005 - Locking 1090359

HSC-LR 7U KIT 9010 - Locking 1090353

HSC-LR 5U KIT 2003 - Locking 2201796

HSC-LR 5U KIT 1018 - Locking 1090367

HSC-LR 5U KIT 3001 - Locking 1090362

HSC-LR 5U KIT 5015 - Locking 1083384

HSC-LR 5U KIT 9005 - Locking 1090358

HSC-LR 5U KIT 9010 - Locking 1090352

HSC-LR 3U KIT 2003 - Locking 2201797

HSC-LR 3U KIT 1018 - Locking 1090366

HSC-LR 3U KIT 3001 - Locking 1090361

HSC-LR 3U KIT 5015 - Locking 2203849

HSC-LR 3U KIT 7035 - Locking 1326357

HSC-LR 3U KIT 9005 - Locking 1090356

HSC-LR 3U KIT 9010 - Locking 1090351

ME-IO 18,8 B 10U TBUS 5015 - Mounting base housing 1248491

ME-IO 18,8 B/FE 10U TBUS 5015 - Mounting base housing 1486138

ME-IO 18,8 B/FE 9U TBUS 7035 - Mounting base housing 2201809

HSCH 2,5-2U-TT22 THR 9005 - PCB header

1091997