UT 6/1P-PE - Protective conductor terminal block

3060555

Protective conductor terminal block, Current and voltage are determined by the plug used., number of connections: 2, connection method: Screw/plug-in connection, cross section: 0.2 mm² - 10 mm², mounting type: NS 35/7,5, NS 35/15, color: green-yellow

Detalhes dos produtos

General	Current and voltage are determined by the plug used.
General
Note	In plugged-in condition, the most unfavorable paths of the entire plug-in connection are decisive.

Product type	Ground terminal block
Product family	UT
Number of connections	2
Number of rows	1
Insulation characteristics
Overvoltage category	III
Degree of pollution	3

Rated surge voltage	8 kV
Maximum power dissipation for nominal condition	1.31 W

Number of connections per level	2
Nominal cross section	6 mm²
Rated cross section AWG	8
Connection method	Screw/plug-in connection
Screw thread	M4
Note	Please observe the current carrying capacity of the DIN rails.
Tightening torque	1.5 ... 1.8 Nm
Stripping length	10 mm
Internal cylindrical gage	A5
Connection in acc. with standard	IEC 61984
Conductor cross-section rigid	0.2 mm² ... 10 mm²
Cross section AWG	24 ... 8 (converted acc. to IEC)
Conductor cross-section flexible	0.2 mm² ... 10 mm²
Conductor cross-section, flexible [AWG]	24 ... 8 (converted acc. to IEC)
Conductor cross-section flexible ultrasound-compressed	0.34 mm² ... 10 mm²
Conductor cross-section, flexible [AWG] ultrasound-compressed	22 ... 8 (converted acc. to IEC)
Conductor cross-section flexible (ferrule without plastic sleeve)	0.25 mm² ... 6 mm²
Flexible conductor cross-section (ferrule with plastic sleeve)	0.25 mm² ... 6 mm²

Width	8.2 mm
End cover width	2.2 mm
Height	49.1 mm
Depth on NS 35/7,5	47.5 mm
Depth on NS 35/15	55 mm

Color	green-yellow
Flammability rating according to UL 94	V0
Insulating material group	I
Insulating material	PA
Static insulating material application in cold	-60 °C
Relative insulation material temperature index (Elec., UL 746 B)	130 °C
Fire protection for rail vehicles (DIN EN 45545-2) R22	HL 1 - HL 3
Fire protection for rail vehicles (DIN EN 45545-2) R23	HL 1 - HL 3
Fire protection for rail vehicles (DIN EN 45545-2) R24	HL 1 - HL 3
Fire protection for rail vehicles (DIN EN 45545-2) R26	HL 1 - HL 3
Surface flammability NFPA 130 (ASTM E 162)	passed
Specific optical density of smoke NFPA 130 (ASTM E 662)	passed
Smoke gas toxicity NFPA 130 (SMP 800C)	passed

Mechanical data
Open side panel	Yes

Oscillation/broadband noise
Specification	DIN EN 50155 (VDE 0115-200):2022-06
Spectrum	Long life test category 1, class B, body mounted
Frequency	f₁ = 5 Hz to f₂ = 150 Hz
ASD level	0.964 (m/s²)²/Hz
Acceleration	0.58g
Test duration per axis	5 h
Test directions	X-, Y- and Z-axis
Shocks
Specification	DIN EN 50155 (VDE 0115-200):2022-06
Pulse shape	Half-sine
Acceleration	5g
Shock duration	30 ms
Number of shocks per direction	3
Test directions	X-, Y- and Z-axis (pos. and neg.)
Ambient conditions
Ambient temperature (operation)	-60 °C ... 100 °C (max. operating temperature range including self-heating, see derating curve)
Ambient temperature (storage/transport)	-25 °C ... 60 °C (for a short time, not exceeding 24 h, -60 °C to +70 °C)
Ambient temperature (assembly)	-5 °C ... 70 °C
Ambient temperature (actuation)	-5 °C ... 70 °C
Permissible humidity (operation)	20 % ... 90 %
Permissible humidity (storage/transport)	30 % ... 70 %

Connection in acc. with standard	IEC 61984

Mounting type	NS 35/7,5
	NS 35/15

Dados comerciais

N.º de artigo	3060555
Pcs./Emb	50 Unidade
Quantidade mínima de pedido	1 Unidade
Chave comercial	BE1
Chave de produto	BE1142
GTIN	4046356599559
Peso por unidade (inclusive embalagem)	21,28 g
Peso por unidade (excluindo embalagem)	20,18 g
Número do imposto alfandegário	85369010
País de origem	CN

Classificações

Certificações

Approval Specification Data
	Tensão nominal U_N	Corrente nominal I_N	Secção transversal American Wire Gauge	Secção transversal mm²
keine
	1000 V			0.2 - 10

Approval Specification Data
	Tensão nominal U_N	Corrente nominal I_N	Secção transversal American Wire Gauge	Secção transversal mm²
B
			24 - 8
C
			24 - 8
D
			24 - 8

Approval Specification Data
	Tensão nominal U_N	Corrente nominal I_N	Secção transversal American Wire Gauge	Secção transversal mm²
keine
	1000 V			0.2 - 10

Environmental product compliance

Produtos compatíveis

Acessórios

Phoenix Contact S.A.

Sintra Business Park, Edifício n°1 Zona Industrial da Abrunheira, sala 0M, 2710-089 SINTRA

Fazer uma pergunta (+351) 21 911 2760 pt-info@phoenixcontact.com

ECLASS-13.0	27250103
ECLASS-15.0	27250103

EU RoHS
Cumpre os requisitos de substância segundo a Diretiva RoHS	Sim (Sem regras de exceção)
China RoHS
Environment friendly use period (EFUP)	EFUP-E Nenhuma substância perigosa acima dos valores-limite
EU REACH SVHC
Nota sobre as substâncias candidatas ao REACH (n.º CAS)	Nenhuma substância numa proporção superior a 0,1 % em massa

Automate

Connect

Mark, assemble, and install

Supply, charge, and protect

Switch, Measure and Monitor

UT 6/1P-PE - Protective conductor terminal block

3060555

Detalhes dos produtos

ECLASS

ETIM

UNSPSC

CSA

IECEE CB Scheme

cULus Recognized

VDE report with production monitoring

CSA

Produtos compatíveis

Automate

Connect

Mark, assemble, and install

Supply, charge, and protect

Switch, Measure and Monitor

UT 6/1P-PE - Protective conductor terminal block 3060555

Detalhes dos produtos

ECLASS

ETIM

UNSPSC

Produtos compatíveis

FBS 2-8 - Plug-in bridge 3030284

FBS 3-8 - Plug-in bridge 3030297

FBS 4-8 - Plug-in bridge 3030307

FBS 5-8 - Plug-in bridge 3030310

FBS 6-8 - Plug-in bridge 3032470

FBS 10-8 - Plug-in bridge 3030323

FBSRH 2-8 - Short-circuit connector 3033802

FBSRH 3-8 - Short-circuit connector 3033803

FBSRH 4-8 - Short-circuit connector 3033804

FBSR 2-8 - Plug-in bridge 3033808

FBSR 3-8 - Plug-in bridge 3001597

FBSR 4-8 - Plug-in bridge 3000585

FBSR 5-8 - Plug-in bridge 3033809

FBSR 10-8 - Plug-in bridge 3001599

FBS 2-8 CT - Plug-in bridge 3033830

FBS 3-8 CT - Plug-in bridge 3033831

FBS 4-8 CT - Plug-in bridge 3033832

FBS 10-8 CT - Plug-in bridge 3033833

FBS 2-8 BU - Plug-in bridge 3032567

FBS 3-8 BU - Plug-in bridge 3032570

FBS 4-8 BU - Plug-in bridge 3032583

FBS 5-8 BU - Plug-in bridge 3032596

FBS 6-8 BU - Plug-in bridge 3032677

FBS 10-8 BU - Plug-in bridge 3032606

LPO 6 - Pick-off plug 3270526

D-UT 2,5/1P - End cover 3047154

ATP-UT - Partition plate 3047167

PC - Coding star 3040588

UP 6/ 1 - Plug 3060610

UP 6/ 2 - Plug 3060623

UP 6/ 3 - Plug 3060636

UP 6/ 4 - Plug 3060649

UP 6/ 5 - Plug 3060652

UP 6/ 6 - Plug 3060665

UP 6/ 7 - Plug 3060678

UP 6/ 8 - Plug 3060681

UP 6/ 9 - Plug 3060694

UP 6/10 - Plug 3060704

UP 6/ 1 BU - Plug 3060717

UP 6/ 1 GNYE - Plug 3060720

UP 6/ 1-L - Plug 3060733

UP 6/ 1-L BU - Plug 3060746

UP 6/ 1-L GNYE - Plug 3060759

UP 6/ 1-M - Plug 3060762

UP 6/ 1-M BU - Plug 3060775

UP 6/ 1-M GNYE - Plug 3060788

UP 6/ 1-R - Plug 3060791

UP 6/ 1-R BU - Plug 3060801

UP 6/ 1-R GNYE - Plug 3060814

PP-H 6/ 1-L OG - Plug 1081233

PP-H 6/ 1 - Plug 3061541

PP-H 6/ 1 BU - Plug 3061554

PP-H 6/ 1 GNYE - Plug 3061567

PP-H 6/ 2 - Plug 3061570

PP-H 6/ 3 - Plug 3061583

PP-H 6/ 4 - Plug 3061596

PP-H 6/ 5 - Plug 3061606

PP-H 6/ 6 - Plug 3061619

PP-H 6/ 7 - Plug 3061622

PP-H 6/ 8 - Plug 3061635

NS 35/ 7,5 PERF 2000MM - DIN rail perforated 0801733

NS 35/ 7,5 UNPERF 2000MM - DIN rail, unperforated 0801681

NS 35/ 7,5 WH PERF 2000MM - DIN rail perforated 1204119

NS 35/ 7,5 WH UNPERF 2000MM-VPE 10 - DIN rail, unperforated 1204122

NS 35/ 7,5 AL UNPERF 2000MM - DIN rail, unperforated 0801704

NS 35/ 7,5 ZN PERF 2000MM - DIN rail perforated 1206421

NS 35/ 7,5 ZN UNPERF 2000MM - DIN rail, unperforated 1206434

NS 35/ 7,5 CU UNPERF 2000MM-VPE 10 - DIN rail, unperforated 0801762

NS 35/ 7,5 CAP - End cap 1206560

UT 6/1P-PE - Protective conductor terminal block

3060555