Feed-through terminal block - URK-ND 2
0701095

Feed-through terminal block, nom. voltage: 800 V, nominal current: 76 A, connection method: Screw connection, 1 level, cross section: 0.5 mm2 - 16 mm2, mounting type: NS 35/7,5, NS 35/15, NS 32, color: gray


Detalhes dos produtos




Product type Feed-through terminal block
Number of connections 2
Number of rows 1
Potentials 1
Insulation characteristics
Overvoltage category III
Degree of pollution 3

Rated surge voltage 8 kV
Maximum power dissipation for nominal condition 2.43 W

Number of connections per level 2
Nominal cross section 16 mm²
Rated cross section AWG 4
1 level
Screw thread M4
Tightening torque 1.5 ... 1.8 Nm
Stripping length 15 mm
Connection in acc. with standard IEC 60947-7-1
Conductor cross section solid 0.5 mm² ... 16 mm²
Cross section AWG 20 ... 6
Conductor cross section flexible 0.5 mm² ... 10 mm²
Conductor cross section, flexible [AWG] 20 ... 8
Flexible conductor cross section flexible (ferrule, w/o plastic sleeve) 0.5 mm² ... 10 mm²
Flexible conductor cross section (ferrule with plastic sleeve) 0.5 mm² ... 6 mm²
2 conductors with same cross section, solid 0.5 mm² ... 4 mm²
2 conductors with same cross section, flexible 0.5 mm² ... 4 mm²
2 conductors with same cross section, flexible, with ferrule without plastic sleeve 0.5 mm² ... 2.5 mm²
2 conductors with the same cross section, flexible, with TWIN ferrule with plastic sleeve 0.5 mm² ... 6 mm²
Nominal current 76 A
Maximum load current 76 A (with 16 mm² conductor cross section)
Nominal voltage 800 V

Width 10.2 mm
End cover width 2.5 mm
Height NS 35/15 51 mm
Height NS 35/7,5 43.5 mm
Height 1.713 "
Height NS 32 48.5 mm
Length 64 mm

Color gray
Flammability rating according to UL 94 V0
Insulating material group I
Insulating material PA
Static insulating material application in cold -60 °C
Temperature index of insulation material (DIN EN 60216-1 (VDE 0304-21)) 125 °C
Relative insulation material temperature index (Elec., UL 746 B) 130 °C
Fire protection for rail vehicles (DIN EN 45545-2) R22 HL 1 - HL 3
Fire protection for rail vehicles (DIN EN 45545-2) R23 HL 1 - HL 3
Fire protection for rail vehicles (DIN EN 45545-2) R24 HL 1 - HL 3
Fire protection for rail vehicles (DIN EN 45545-2) R26 HL 1 - HL 3
Calorimetric heat release NFPA 130 (ASTM E 1354) 27,5 MJ/kg
Surface flammability NFPA 130 (ASTM E 162) passed
Specific optical density of smoke NFPA 130 (ASTM E 662) passed
Smoke gas toxicity NFPA 130 (SMP 800C) passed

Mechanical data
Open side panel Yes

Ambient conditions
Ambient temperature (operation) -60 °C ... 105 °C (max. short-term operating temperature RTI Elec.)
Ambient temperature (storage/transport) -25 °C ... 60 °C (for a short time, not exceeding 24 h, -60 °C to +70 °C)
Ambient temperature (assembly) -5 °C ... 70 °C
Ambient temperature (actuation) -5 °C ... 70 °C
Permissible humidity (storage/transport) 30 % ... 70 %

Connection in acc. with standard IEC 60947-7-1

Mounting type NS 35/7,5
NS 35/15
NS 32

N.º de artigo 0701095
Pcs./Emb 50 Unidade
Quantidade mínima de pedido 1 Unidade
Chave comercial BE1
Chave de produto BE1211
Página de catálogo Página 295 (CL-2005)
GTIN 4017918003609
Peso por unidade (inclusive embalagem) 36,96 g
Peso por unidade (excluindo embalagem) 35,467 g
Número do imposto alfandegário 85369010
País de origem DE


ECLASS

ECLASS-9.0 27141120
ECLASS-10.0.1 27141120
ECLASS-11.0 27141120

ETIM

ETIM 8.0 EC000897

UNSPSC

UNSPSC 21.0 39121400

CSA

Approval ID: 13631
Approval Specification Data
Tensão nominal UN Corrente nominal IN Secção transversal American Wire Gauge Secção transversal mm2
600 V 65 A 18 - 6

EAC

Approval ID: RU C-DE.BL08.B.00534

cULus Recognized

Approval ID: E60425
Approval Specification Data
Tensão nominal UN Corrente nominal IN Secção transversal American Wire Gauge Secção transversal mm2
Use group B
600 V 65 A 24 - 6
Use group C
600 V 65 A 24 - 6
Use group F
800 V 65 A 24 - 6

REACh SVHC Lead 7439-92-1
China RoHS Environmentally Friendly Use Period = 50 years
For information on hazardous substances, refer to the manufacturer’s declaration available under “Downloads”

Produtos compatíveis


  1. Fixed bridge FBI 2-10 - 0203483

  2. Fixed bridge FBI 10-10 - 0203276

    Max. current carrying capacity
    82 A
  3. Insertion bridge EB 2-10 - 0203153

    Max. current carrying capacity
    57 A
  4. Insertion bridge EB 3-10 - 0203328

    Max. current carrying capacity
    57 A
  5. Insertion bridge EB 10-10 - 0203137

    Max. current carrying capacity
    57 A
  6. Switching jumper SB 2-10/15 - 0203234

    Max. current carrying capacity
    57 A
  7. End cover D-URK-ND - 0701121

  8. DIN rail perforated NS 32 PERF 2000MM-VPE 10 - 1201002

  9. Short-circuit connector KSS 10 - 0310541

  10. DIN rail, unperforated NS 32 UNPERF 2000MM-VPE 10 - 1201015

  11. Separating plate TS-URK-ND - 0701105

  12. DIN rail perforated NS 35/ 7,5 PERF 2000MM - 0801733

  13. Marker card SBS10:UNBEDRUCKT - 1007248

  14. DIN rail, unperforated NS 35/ 7,5 UNPERF 2000MM - 0801681

  15. Screwdriver SZS 1,0X4,0 VDE - 1205066

  16. DIN rail perforated NS 35/ 7,5 WH PERF 2000MM - 1204119

  17. DIN rail, unperforated NS 35/ 7,5 WH UNPERF 2000MM-VPE 10 - 1204122

  18. DIN rail, unperforated NS 35/ 7,5 AL UNPERF 2000MM - 0801704

  19. DIN rail perforated NS 35/ 7,5 ZN PERF 2000MM - 1206421

  20. DIN rail, unperforated NS 35/ 7,5 ZN UNPERF 2000MM - 1206434

  21. DIN rail, unperforated NS 35/ 7,5 CU UNPERF 2000MM-VPE 10 - 0801762

  22. End cap NS 35/ 7,5 CAP - 1206560

  23. DIN rail perforated NS 35/15 PERF 2000MM - 1201730

  24. DIN rail, unperforated NS 35/15 UNPERF 2000MM - 1201714

  25. DIN rail perforated NS 35/15 WH PERF 2000MM - 0806602

  26. DIN rail, unperforated NS 35/15 WH UNPERF 2000MM-VPE 10 - 1204135

  27. DIN rail, unperforated NS 35/15 AL UNPERF 2000MM - 1201756

  28. DIN rail perforated NS 35/15 ZN PERF 2000MM - 1206599

  29. DIN rail, unperforated NS 35/15 ZN UNPERF 2000MM - 1206586

  30. DIN rail, unperforated NS 35/15 CU UNPERF 2000MM-VPE 10 - 1201895

  31. End cap NS 35/15 CAP - 1206573

  32. Zack marker strip ZB 10:UNBEDRUCKT - 1053001

  33. Zack marker strip ZB 10 CUS - 0824941

  34. Zack marker strip ZB10,LGS:FORTL.ZAHLEN - 1053014

  35. Zack marker strip ZB10,QR:FORTL.ZAHLEN - 1053027

  36. Marker for terminal blocks ZB10,LGS:L1-N,PE - 1053412

  37. Marker for terminal blocks ZB10,LGS:U-N - 1053438

  38. Marker for terminal blocks UC-TM 10 - 0818069

  39. Marker for terminal blocks UC-TM 10 CUS - 0824605

  40. Marker for terminal blocks UCT-TM 10 - 0829142

  41. Marker for terminal blocks UCT-TM 10 CUS - 0829623

  42. End clamp CLIPFIX 35 - 3022218

  43. End clamp CLIPFIX 35-5 - 3022276

  44. End clamp E/NS 35 N - 0800886

  45. End clamp E/UK - 1201442

  46. End clamp E/UK 1 - 1201413

  47. Female test connector PSBJ 4/15/6 FARBLOS - 0303419

  48. Female test connector PSBJ 4/15/6 WH - 0303312

  49. Female test connector PSBJ 4/15/6 RD - 0303325

  50. Female test connector PSBJ 4/15/6 BU - 0303354

  51. Female test connector PSBJ 4/15/6 YE - 0303367

  52. Female test connector PSBJ 4/15/6 GN - 0303370

  53. Female test connector PSBJ 4/15/6 VT - 0303383

  54. Female test connector PSBJ 4/15/6 GY - 0303396

  55. Female test connector PSBJ 4/15/6 BK - 0303406

  56. Female test connector PSB 4/7/6 - 0303299