AXC F XT SPLC 1000
-
PLC extension module
1159811
Alignable safety controller for 32 PROFIsafe devices connected to a modularly expandable PLCnext Control (not for AXC F 1152)
Este produto precisa de outros produtos para a operação.
Acessórios necessários
Transferência gratuita disponível.
Downloads
Detalhes dos produtos
| Dimensional drawing |
|
| Width | 45 mm |
| Height | 126.93 mm |
| Depth | 75 mm |
| Note on dimensions | The depth applies when a TH 35-7.5 DIN rail is used (in accordance with EN 60715). |
| External dimensions | |
| Width / Height / Depth | 45 mm / 126.93 mm / 75 mm (The depth applies when a TH 35-7.5 DIN rail is used (in accordance with EN 60715).) |
| General | If the SPLC-1000 is operated with AXC F 2152, the AXC BS L 2 bus base module must be used. |
| Note on application | |
| Note on application | Only for industrial use |
| Web server | no |
| Processor | Arm® Cortex®-M4 180 MHz (CPU1) |
| Arm® Cortex®-M4 100 MHz (CPU2) | |
| Function | |
| Diagnostics display | no |
| Redundancy function | no |
| Safety function | yes |
| Industrial cybersecurity | yes |
| System requirements | |
| Engineering tool | PLCnext Engineer |
| Product type | I/O component |
| Product family | PLCnext Control Extension |
| Type | modular |
| Special properties | Development process certified in accordance with IEC 62443-4-1 |
| Product certified in accordance with IEC 62443-4-2 | |
| Insulation characteristics | |
| Protection class | III (IEC 61140, EN 61140, VDE 0140-1) |
| Display | |
| Diagnostics display | no |
| Maximum power dissipation for nominal condition | typ. 1.92 W |
| typ. 1.92 W | |
| Supply | |
| Supply voltage | 24 V DC |
| Supply voltage range | 19.2 V DC ... 30 V DC (including all tolerances, including ripple) |
| Max. current consumption | 100 mA |
| Typical current consumption | 80 mA |
| Potentials: Supply of the logic voltage UL | |
| Supply voltage | 24 V DC |
| Supply voltage range | 19.2 V DC ... 30 V DC (including all tolerances, including ripple) |
| Current draw | max. 100 mA |
| typ. 80 mA | |
| Protective circuit | Reverse polarity protection; Polarity protection diode |
| Transient protection; Suppressor diode | |
| Connection technology | |
| Connection name | Axioline F connector |
| Conductor connection | |
| Connection method | Push-in connection |
| Conductor cross-section rigid | 0.2 mm² ... 1.5 mm² |
| Conductor cross-section flexible | 0.2 mm² ... 1.5 mm² |
| Conductor cross-section AWG | 24 ... 16 |
| Stripping length | 8 mm |
| Axioline F connector | |
| Connection method | Push-in connection |
| Conductor cross-section, rigid | 0.2 mm² ... 1.5 mm² |
| Conductor cross-section, flexible | 0.2 mm² ... 1.5 mm² |
| Conductor cross-section AWG | 24 ... 16 |
| Stripping length | 8 mm |
| Ambient conditions | |
| Degree of protection | IP20 |
| Ambient temperature (operation) | -25 °C ... 60 °C up to 2000 m above mean sea level |
| -25 °C ... 55 °C up to 3000 m above mean sea level | |
| -25 °C ... 50 °C up to 4000 m above mean sea level | |
| Ambient temperature (storage/transport) | -40 °C ... 85 °C |
| Permissible humidity (operation) | 5 % ... 95 % (according to DIN EN 61131-2) |
| Permissible humidity (storage/transport) | 5 % ... 95 % (according to DIN EN 61131-2) |
| Shock (operation) | 30g (in accordance with EN 60068-2-27/IEC 60068-2-27) |
| Shock (storage/transport) | 30g (in accordance with EN 60068-2-27/IEC 60068-2-27) |
| Vibration (operation) | 5g (in accordance with EN 60068-2-6/IEC 60068-2-6) |
| Vibration (storage/transport) | 5g (in accordance with EN 60068-2-6/IEC 60068-2-6) |
| Air pressure (operation) | 70 kPa ... 106 kPa (up to 3000 m above sea level) |
| Air pressure (storage/transport) | 58 kPa ... 106 kPa (up to 4500 m above mean sea level) |
| Resistance to gases that may endanger the functions, in acc. with DIN 40046-36, DIN 40046-37 | Use of the device in these ambient conditions is prohibited. |
| ATEX | |
| Identification | II 3 G Ex ec IIC T4 Gc |
| Certificate | UL 21 ATEX 2651X |
| IECEx | |
| Identification | Ex ec IIC T4 Gc |
| Certificate | IECEx ULD 21.0029X |
| UL Ex, USA / Canada | |
| Identification | Class I, Zone 2, AEx ec IIC T4, Ex ec IIC T4 Gc X |
| Class I, Div. 2 Groups A, B, C, D T4 | |
| Certificate | E366272 |
| UL, USA/Canada | |
| Identification | cULus |
| Certificate | E238705 |
| Industrial Cyber Security | |
| Identification | Industrial IT Security, IACS Component |
| Certificate | IITS2 029429 0027 |
| Note | Configuration: Security Profile active |
| Mounting type | DIN rail mounting |
Vantagens
Implementation of safety-related applications up to SIL 3/PL e
PROFIsafe F-Host for up to 32 PROFIsafe F-Devices in PROFINET or Axioline
PROFIsafe F-Device for communication with a higher-level PROFIsafe F-Host SPLC
2 x diverse SCPUs with Cortex M4-based architecture
Full integration into the PLCnext Technology ecosystem