1. Página inicial
  2. Produtos
  3. Connectors and cables
  4. Circular connectors
  5. Coupler connector - SB-8ESSA8A9L32S
Pin version: dimension A = 3.8 mm, socket version: dimension A = 0.15 mm
Pin assignment of socket signal, coding 1
I = current strength, ϑ = ambient temperature, power contacts A–C: 3x up to 70 A, signal contacts: 4x 2 A constant, data contacts: no load

Coupler connector - SB-8ESSA8A9L32S
1623344

Coupler connector, SB, straight long, shielded: yes, for standard and SPEEDCON interlock, M40, No. of pos.: 8+4+PE, Direction of rotation: Standard, type of contact: Socket, Crimp connection, cable diameter range: 9 mm ... 14 mm, coding:Signal, coding 1

Detalhes dos produtos

Order information: Crimp contacts, 8 x Ø 1 mm, 5 x Ø 3.6 mm, order separately
Safety note
Safety note WARNING: The connectors may not be plugged in or disconnected under load. Ignoring the warning or improper use may damage persons and/or property.
• WARNING: Commission properly functioning products only. The products must be regularly inspected for damage. Decommission defective products immediately. Replace damaged products. Repairs are not possible.
• WARNING: Only electrically qualified personnel may install and operate the product. They must observe the following safety notes. The qualified personnel must be familiar with the basics of electrical engineering. They must be able to recognize and prevent danger. The relevant symbol on the packaging indicates that only personnel familiar with electrical engineering are allowed to install and operate the product.
• The products are suitable for applications in plant, controller, and electrical device engineering.
• When operating the connectors in outdoor applications, they must be separately protected against environmental influences.
• Assembled products may not be manipulated or improperly opened.
• Only use mating connectors that are specified in the technical data of the standards listed (e.g. the ones listed in the product accessories online at phoenixcontact.com/products).
• When using the product in direct connection with third-party manufacturers, the user is responsible.
• For operating voltages > 50 V AC, conductive connector housings must be grounded
• VDE 0100/1.97 § 411.1.3.2 and DIN EN 60 204/11.98 § 14.1.3 are applicable when combining several circuits in a cable and/or connector
• Observe the corresponding technical data. You will find information:
o On the product
o On the packing label
o In the supplied documentation
o Online at phoenixcontact.com/products under the product
• Only use tools recommended by Phoenix Contact
• The installation notes/Design In documents online on the download page at phoenixcontact.com/products must be observed for this product.
• Use a protective cap to protect connectors that are not in use. The suitable accessories are available online in the accessory section of the product at phoenixcontact.com/products
• Operate the connector only when it is fully plugged in and interlocked.
• Ensure that when laying the cable, the tensile load on the connectors does not exceed the upper limit specified in the standards.
• Observe the minimum bending radius of the cable. Lay the cable without twisting it.
• The connector warms up in normal operation. Depending on the ambient conditions, the surface of the connector can continue to warm up. In this case, the user is responsible for posting warnings (e.g. DIN EN ISO 13732-1:2008-12).
Product type Circular connector (cable-side)
Ambient temperature (operation) -40 °C ... 115 °C (see derating curve)
Application Hybrid
Number of positions 13
Connection profile 8+4+PE
Coding Signal, coding 1
Direction of rotation Standard
Contact diameter 3.6 mm
N.º de artigo 1623344
Pcs./Emb 1 Unidade
Quantidade mínima de pedido 1 Unidade
Observação Produção ligada a pedido (sem devolução)
Chave comercial ABR
Chave de produto ABRCGI
Página de catálogo Página 127 (C-2-2019)
GTIN 4055626195049
Peso por unidade (inclusive embalagem) 486 g
Peso por unidade (excluindo embalagem) 486 g
Número do imposto alfandegário 85366990
País de origem DE

ECLASS

ECLASS-9.0 27440102
ECLASS-10.0.1 27440102
ECLASS-11.0 27440102

ETIM

ETIM 8.0 EC002635

UNSPSC

UNSPSC 21.0 39121400

EAC

Approval ID: B.01687
REACh SVHC Lead 7439-92-1
China RoHS Environmentally Friendly Use Period = 50 years
For information on hazardous substances, refer to the manufacturer’s declaration available under “Downloads”

Produtos compatíveis

  1. Protective cap SM-Z0001 - 1605866

  2. Crimp contact SB-10KS001 - 1623603

  3. Metal protective cap SB-Z0001 - 1623827

  4. Crimp contact SB-10KS002 - 1623604

  5. Crimp contact ST-10KS010 - 1618239

  6. Crimp contact SB-10KS003 - 1623605

  7. Crimp contact ST-10KS035 - 1618464

  8. Crimp contact SB-10KS004 - 1623606

  9. Crimp contact SB-36KS002 - 1623378

  10. Crimp contact SB-36KS003 - 1623379

  11. Crimp contact SB-36KS004 - 1623380

  12. Crimp contact SB-36KS005 - 1623381

  13. Color-coding SM-Z0025 - 1620558

  14. Color-coding SM-Z0026 - 1620559

  15. Color-coding SM-Z0027 - 1620560

Vantagens

All housing can be fitted with pin or socket contacts
A total of eight contacts are available for signal transmission
Mechanical coding reliably prevents incorrect connections
Safe use in the field, thanks to high degree of protection
Consistent EMC protection for reliable connection solutions in the industrial environment