Pin version: dimension A = 4.05 mm, socket version: dimension A = 0.4 mm
Pin assignment of pin signal, coding 1
I = current strength, ϑ = ambient temperature, power contacts A–C: 3x up to 70 A, signal contacts: 4x 2 A constant, data contacts: no load
Cable connector - SB-8EPSA8A8L34S
1623337
Cable connector, SB, straight long, shielded: yes, SPEEDCON locking, M40, No. of pos.: 8+4+PE, Direction of rotation: Standard, type of contact: Pin, Crimp connection, cable diameter range: 20.5 mm ... 26.5 mm, coding:Signal, coding 1
Crimp contacts, 8 x Ø 1 mm, 5 x Ø 3.6 mm, order separately
Safety note
Safety note
WARNING: The connectors may not be plugged in or disconnected under load. Ignoring the warning or improper use may damage persons and/or property.
• WARNING: Commission properly functioning products only. The products must be regularly inspected for damage. Decommission defective products immediately. Replace damaged products. Repairs are not possible.
• WARNING: Only electrically qualified personnel may install and operate the product. They must observe the following safety notes. The qualified personnel must be familiar with the basics of electrical engineering. They must be able to recognize and prevent danger. The relevant symbol on the packaging indicates that only personnel familiar with electrical engineering are allowed to install and operate the product.
• The products are suitable for applications in plant, controller, and electrical device engineering.
• When operating the connectors in outdoor applications, they must be separately protected against environmental influences.
• Assembled products may not be manipulated or improperly opened.
• Only use mating connectors that are specified in the technical data of the standards listed (e.g. the ones listed in the product accessories online at phoenixcontact.com/products).
• When using the product in direct connection with third-party manufacturers, the user is responsible.
• For operating voltages > 50 V AC, conductive connector housings must be grounded
• VDE 0100/1.97 § 411.1.3.2 and DIN EN 60 204/11.98 § 14.1.3 are applicable when combining several circuits in a cable and/or connector
• Observe the corresponding technical data. You will find information: o On the product o On the packing label o In the supplied documentation o Online at phoenixcontact.com/products under the product
• Only use tools recommended by Phoenix Contact
• The installation notes/Design In documents online on the download page at phoenixcontact.com/products must be observed for this product.
• Use a protective cap to protect connectors that are not in use. The suitable accessories are available online in the accessory section of the product at phoenixcontact.com/products
• Operate the connector only when it is fully plugged in and interlocked.
• Ensure that when laying the cable, the tensile load on the connectors does not exceed the upper limit specified in the standards.
• Observe the minimum bending radius of the cable. Lay the cable without twisting it.
• The connector warms up in normal operation. Depending on the ambient conditions, the surface of the connector can continue to warm up. In this case, the user is responsible for posting warnings (e.g. DIN EN ISO 13732-1:2008-12).
Product type
Circular connector (cable-side)
Ambient temperature (operation)
-40 °C ... 115 °C (see derating curve)
Application
Hybrid
Number of positions
13
Connection profile
8+4+PE
Coding
Signal, coding 1
Direction of rotation
Standard
Contact diameter
3.6 mm
N.º de artigo
1623337
Pcs./Emb
1 Unidade
Quantidade mínima de pedido
1 Unidade
Observação
Produção ligada a pedido (sem devolução)
Chave comercial
ABR
Chave de produto
ABRCGH
Página de catálogo
Página 126 (C-2-2019)
GTIN
4055626194356
Peso por unidade (inclusive embalagem)
442 g
Peso por unidade (excluindo embalagem)
442 g
Número do imposto alfandegário
85366990
País de origem
DE
ECLASS
ECLASS-9.0
27440102
ECLASS-10.0.1
27440102
ECLASS-11.0
27440102
ETIM
ETIM 8.0
EC002635
UNSPSC
UNSPSC 21.0
EAC
Approval ID: B.01687
REACh SVHC
Lead 7439-92-1
China RoHS
Environmentally Friendly Use Period = 50 years
For information on hazardous substances, refer to the manufacturer’s declaration available under “Downloads”
