Feed-through terminal block - OTTA 25 M6 PH3
0713122

Universal terminal with bolt connection, cross-point head screw, cross section: 1 mm2 ... 25 mm2, width: 18 mm, color: gray


Detalhes dos produtos




Product type Bolt connection terminal block
Number of connections 2
Number of rows 1
Potentials 1
Insulation characteristics
Overvoltage category III
Degree of pollution 3

Rated surge voltage 8 kV
Maximum power dissipation for nominal condition 3.26 W

Number of connections per level 2
Nominal cross section 25 mm²
1 level
Stripping length The stripping length depends on the specification provided by the cable lug manufacturer.
The stripping length depends on the specification provided by the cable lug manufacturer.
Connection in acc. with standard IEC 60947-7-1
Nominal current 101 A
Maximum load current 101 A (with 25 mm² conductor cross section)
Nominal voltage 800 V (the nominal voltage applies to insulated cable lugs)
Nominal cross section 25 mm²
Cable lug connection DIN 46234:1980-03
Connection in acc. with standard DIN 46234:1980-03
Cross section 1.5 mm² ... 25 mm²
Cross section range AWG 16 ... 4
Hole diameter 6.5 mm
Width 16 mm
Bolt diameter 6 mm
Screw thread M6
Tightening torque 3.2 ... 3.7 Nm
Connection in acc. with standard DIN 46237:1970-07
Cross section 2.5 mm² ... 6 mm²
Hole diameter 6.5 mm
Width 16 mm
Bolt diameter 6 mm
Screw thread M6
Tightening torque 3.2 ... 3.7 Nm

Width 18 mm
End cover width 2 mm
Height NS 35/15 72 mm
Height NS 35/7,5 64.5 mm
Height 2.539 "
Height NS 32 69.5 mm
Length 60 mm

Color gray
Flammability rating according to UL 94 V0
Insulating material group I
Insulating material PA
Static insulating material application in cold -60 °C
Temperature index of insulation material (DIN EN 60216-1 (VDE 0304-21)) 130 °C
Relative insulation material temperature index (Elec., UL 746 B) 130 °C
Fire protection for rail vehicles (DIN EN 45545-2) R22 HL 1 - HL 3
Fire protection for rail vehicles (DIN EN 45545-2) R23 HL 1 - HL 3
Fire protection for rail vehicles (DIN EN 45545-2) R24 HL 1 - HL 3
Fire protection for rail vehicles (DIN EN 45545-2) R26 HL 1 - HL 3
Calorimetric heat release NFPA 130 (ASTM E 1354) 28 MJ/kg
Surface flammability NFPA 130 (ASTM E 162) passed
Specific optical density of smoke NFPA 130 (ASTM E 662) passed
Smoke gas toxicity NFPA 130 (SMP 800C) passed

Surge voltage test
Result Test passed
Temperature-rise test
Requirement temperature-rise test Increase in temperature ≤ 45 K
Result Test passed
Power-frequency withstand voltage
Test voltage setpoint 2 kV
Result Test passed

Mechanical data
Open side panel Yes

Mechanical strength
Result Test passed
Attachment on the carrier
DIN rail/fixing support NS 32/NS 35
Test force setpoint 10 N
Result Test passed

Needle-flame test
Time of exposure 30 s
Result Test passed
Oscillation/broadband noise
Specification DIN EN 50155 (VDE 0115-200):2018-05
Ambient conditions
Ambient temperature (operation) -60 °C ... 105 °C (max. short-term operating temperature RTI Elec.)
Ambient temperature (storage/transport) -25 °C ... 60 °C (for a short time, not exceeding 24 h, -60 °C to +70 °C)
Ambient temperature (assembly) -5 °C ... 70 °C
Ambient temperature (actuation) -5 °C ... 70 °C
Permissible humidity (storage/transport) 30 % ... 70 %

Connection in acc. with standard IEC 60947-7-1

Mounting type NS 35/7,5
NS 35/15
NS 32

N.º de artigo 0713122
Pcs./Emb 50 Unidade
Quantidade mínima de pedido 1 Unidade
Observação Produção ligada a pedido (sem devolução)
Chave comercial BE4
Chave de produto BE4513
GTIN 4046356013338
Peso por unidade (inclusive embalagem) 53,894 g
Peso por unidade (excluindo embalagem) 53,894 g
Número do imposto alfandegário 85369010
País de origem IN


ECLASS

ECLASS-9.0 27141120
ECLASS-10.0.1 27141120
ECLASS-11.0 27141120

ETIM

ETIM 8.0 EC000897

UNSPSC

UNSPSC 21.0 39121400

DNV

Approval ID: TAE00001CT
Approval Specification Data
Tensão nominal UN Corrente nominal IN Secção transversal American Wire Gauge Secção transversal mm2

CSA

Approval ID: 13631
Approval Specification Data
Tensão nominal UN Corrente nominal IN Secção transversal American Wire Gauge Secção transversal mm2
600 V 100 A 18 - 4

UL Recognized

Approval ID: E60425
Approval Specification Data
Tensão nominal UN Corrente nominal IN Secção transversal American Wire Gauge Secção transversal mm2
Use group B
600 V 115 A
Use group C
600 V 115 A

EAC

Approval ID: RU C-DE.BL08.B.00540

LR

Approval ID: LR2041789TA

REACh SVHC Lead 7439-92-1
China RoHS Environmentally Friendly Use Period = 50 years
For information on hazardous substances, refer to the manufacturer’s declaration available under “Downloads”

Produtos compatíveis


  1. End cover D-OTTA 25 - 0790514

  2. DIN rail perforated NS 32 PERF 2000MM-VPE 10 - 1201002

  3. Partition plate ATP-OTTA 25 - 0790501

  4. DIN rail, unperforated NS 32 UNPERF 2000MM-VPE 10 - 1201015

  5. Screwdriver SZS 1,0X6,5 VDE - 1205079

  6. DIN rail perforated NS 35/ 7,5 PERF 2000MM - 0801733

  7. DIN rail, unperforated NS 35/ 7,5 UNPERF 2000MM - 0801681

  8. DIN rail perforated NS 35/ 7,5 WH PERF 2000MM - 1204119

  9. DIN rail, unperforated NS 35/ 7,5 WH UNPERF 2000MM-VPE 10 - 1204122

  10. DIN rail, unperforated NS 35/ 7,5 AL UNPERF 2000MM - 0801704

  11. DIN rail perforated NS 35/ 7,5 ZN PERF 2000MM - 1206421

  12. DIN rail, unperforated NS 35/ 7,5 ZN UNPERF 2000MM - 1206434

  13. DIN rail, unperforated NS 35/ 7,5 CU UNPERF 2000MM-VPE 10 - 0801762

  14. End cap NS 35/ 7,5 CAP - 1206560

  15. DIN rail perforated NS 35/15 PERF 2000MM - 1201730

  16. DIN rail, unperforated NS 35/15 UNPERF 2000MM - 1201714

  17. DIN rail perforated NS 35/15 WH PERF 2000MM - 0806602

  18. DIN rail, unperforated NS 35/15 WH UNPERF 2000MM-VPE 10 - 1204135

  19. DIN rail, unperforated NS 35/15 AL UNPERF 2000MM - 1201756

  20. DIN rail perforated NS 35/15 ZN PERF 2000MM - 1206599

  21. DIN rail, unperforated NS 35/15 ZN UNPERF 2000MM - 1206586

  22. DIN rail, unperforated NS 35/15 CU UNPERF 2000MM-VPE 10 - 1201895

  23. End cap NS 35/15 CAP - 1206573

  24. DIN rail, unperforated NS 35/15-2,3 UNPERF 2000MM-VPE 10 - 1201798

  25. Zack marker strip ZB 10:UNBEDRUCKT - 1053001

  26. Zack marker strip ZB 10 CUS - 0824941

  27. Zack marker strip ZB10,LGS:FORTL.ZAHLEN - 1053014

  28. Zack marker strip ZB10,QR:FORTL.ZAHLEN - 1053027

  29. Marker for terminal blocks ZB10,LGS:L1-N,PE - 1053412

  30. Marker for terminal blocks ZB10,LGS:U-N - 1053438

  31. Marker for terminal blocks UC-TM 10 - 0818069

  32. Marker for terminal blocks UC-TM 10 CUS - 0824605

  33. Marker for terminal blocks UCT-TM 10 - 0829142

  34. Marker for terminal blocks UCT-TM 10 CUS - 0829623

  35. End clamp CLIPFIX 35 - 3022218

  36. End clamp CLIPFIX 35-5 - 3022276

  37. End clamp E/NS 35 N - 0800886

  38. End clamp E/UK - 1201442

  39. End clamp E/UK 1 - 1201413