VAL-SPP-T2-600DC-PV-P
-
Type 2 surge protection plug
1466778
Replacement plug for PV special combined lightning current and surge arrester from the VAL-SPP-T2-600DC-PV-2+V-UT... product family.
Detalhes dos produtos
| Product type | Replacement plug |
| Product family | VAL-SPP |
| IEC test classification | PV II |
| PV T2 | |
| EN type | T2 |
| IEC power supply system | DC |
| Type | Male |
| Number of positions | 1 |
| Installation location | Indoor |
| Installation location of the disconnect device | Internal |
| Accessibility | Accessible |
| Connection configuration | Y configuration |
| End-of-life mode | OCFM (Open-Circuit Failure Mode) |
| Surge protection fault message | optical |
| Insulation characteristics | |
| Overvoltage category | III |
| Pollution degree | 2 |
| Connection method | pluggable |
| Dimensional drawing |
|
| Width | 17.5 mm |
| Height | 54.2 mm |
| Depth | 61.5 mm |
| Horizontal pitch | 1 Div. |
| Color | light gray (RAL 7035) |
| Flammability rating according to UL 94 | V-0 |
| CTI value of material | 600 |
| Insulating material | PA 6.6-FR 20 % GF |
| Material group | I |
| Housing material | PA 6.6-FR 20 % GF |
| Protective conductor current IPE | ≤ 350 µA AC |
| ≤ 100 µA DC | |
| Standby power consumption PC | ≤ 40 mVA |
| Nominal discharge current In (8/20) µs | 20 kA |
| Maximum discharge current Imax (8/20) µs | 40 kA |
| Total discharge current ITotal (8/20) µs | 40 kA |
| Voltage protection level Up | ≤ 3 kV (2 plugs in series) |
| Residual voltage Ures | ≤ 3 kV (at In, 2 plugs in series) |
| ≤ 2.5 kV (at 10 kA, 2 plugs in series) | |
| ≤ 2.3 kV (at 5 kA, 2 plugs in series) | |
| ≤ 2.1 kV (at 3 kA, 2 plugs in series) | |
| Response time tA | ≤ 25 ns |
| PV protective circuit | |
| Connection configuration | Y configuration |
| End-of-life mode | OCFM (Open-Circuit Failure Mode) |
| Protective circuit DC voltage side (DC) | |
| Open circuit voltage UOCSTC | 667 V DC (2 plugs in series) |
| Maximum discharge current Imax (8/20) µs | 40 kA |
| Response time tA | ≤ 25 ns |
| Total discharge current ITotal (8/20) µs | 40 kA |
| Insulation resistance Riso | > 5 MΩ (at 500 V DC) |
| Nominal discharge current In (8/20) µs | 20 kA |
| Continuous operating current ICPV | ≤ 100 µA DC |
| Maximum continuous operating voltage UCPV | 800 V DC (2 plugs in series) |
| Short-circuit current rating ISCPV | 15000 A |
| Residual voltage Ures | ≤ 3 kV (at In, 2 plugs in series) |
| ≤ 2.5 kV (at 10 kA, 2 plugs in series) | |
| ≤ 2.3 kV (at 5 kA, 2 plugs in series) | |
| ≤ 2.1 kV (at 3 kA, 2 plugs in series) | |
| Protective conductor current IPE | ≤ 350 µA AC |
| ≤ 100 µA DC | |
| Voltage protection level Up | ≤ 3 kV (2 plugs in series) |
| Standby power consumption PC | ≤ 40 mVA |
| Ambient conditions | |
| Degree of protection | IP20C |
| Ambient temperature (operation) | -40 °C ... 85 °C |
| Ambient temperature (storage/transport) | -40 °C ... 85 °C |
| Ambient temperature (assembly) | -5 °C ... 50 °C |
| Altitude | ≤ 5000 m (amsl) |
| Permissible humidity (operation) | 5 % ... 95 % |
| Shock (operation) | 25g (Half-sine / 11 ms / 3x ±X, ±Y, ±Z) |
| Vibration (operation) | 5g (5-500 Hz/2.5 h/XYZ) |
| Standards/specifications | EN 61643-31 |
| Note | 2019 |
| Standards/specifications | IEC 61643-31 |
| Note | 2018 |
| Mounting type | on base element |
Vantagens
Easy and safe installation with forward-thinking handling and safety features
Reliable system protection with maximum performance and endurance
Can be used in a wide range of applications due to the optimized design and broad portfolio
Simple planning due to comprehensive digital data and selectors