Industrial Ethernet Switch - SCX 4POE 2T
1108542

Smart Camera Box to connect PoE end devices, four PoE ports, two uplink ports (RJ45), integrated Managed Switch and surge protection, supply voltage 100 ... 240 V AC, wall or mast mounting


Detalhes dos produtos


The Smart Camera Box is used to connect PoE end devices such as IP cameras to a video server. You can use the Smart Camera Box to supply voltage to PoE end devices and additional external devices.The Smart Camera Box is a manageable outdoor PoE switch with a power supply, a wiring space for the AC voltage supply, replaceable overvoltage protection modules, and an area with an integrated 24 V DC supply and a DIN rail for mounting additional devices.The Smart Camera Box integrates the functions of conventional connection boxes equipped with standard DIN rail devices into a single compact device. This saves you planning and installation time.Numerous management and monitoring functions ensure reliable operation of the system.



Desenho cotado
Width 284 mm
Height 364 mm
Depth 121 mm

Color light gray
Material Polycarbonate PC (Housing)
Polyamide (Cable gland)
Neoprene (Cable gland seal, black)
Flammability rating according to UL 94 V0 (Housing, a vertically clamped sample is extinguished within 10 seconds, no flaming droplets of molten plastic, smoldering for a maximum of 60 seconds)
V2 (Cable gland; a vertically tensioned sample is extinguished within 30 seconds; flaming droplets are permitted)
V2 (Cable gland; a vertically tensioned sample is extinguished within 30 seconds; flaming droplets are permitted)
Impact strength IK10 (in accordance with IEC 62262: Impact energy of 20 J, corresponds to 5 kg from a height of 40 cm)

Mounting type Wall mounting
Mast mounting

Basic functions Store-and-forward switch, complies with IEEE 802.3
Data: Ethernet / Fast Ethernet / Gigabit Ethernet
Transmission speed 10/100/1000 Mbps
Connection method RJ45 jack
No. of channels 4
Transmission length 100 m (per segment)
Transmission medium Copper
Maximum output power 165 W (>55°C derating)
155 W (If switching output is active, >55°C derating)
90 W (per port POE1...3, >50°C derating)
30 W (POE4)
Data: Ethernet / Fast Ethernet / Gigabit Ethernet
Transmission speed 10/100/1000 Mbps
Connection method RJ45 jack
No. of channels 2
Transmission length 100 m (per segment)
Transmission medium Copper
Data: Configuration interface
Connection method RJ45
No. of channels 1
Data: Switching output
Connection method Push-in spring connection
No. of channels 1
Conductor cross section flexible max. 1.5 mm²
Conductor cross section flexible min. 0.2 mm²
Conductor cross section, flexible, with ferrule, with plastic sleeve 0.25 mm² ... 0.75 mm² (Stripping length 8 mm)
Conductor cross section flexible, with ferrule without plastic sleeve 0.25 mm² ... 1.5 mm² (Stripping length 8 mm)
Conductor cross section solid max. 1.5 mm²
Conductor cross section solid min. 0.2 mm²
Conductor cross section AWG max. 16
Conductor cross section AWG min. 24
Stripping length 10 mm
Load/output load current output no inductive load
Output nominal voltage 24 V DC ±10 % (Supply for devices within the Smart Camera Box)
Output current 300 mA (typical)

MTTF 441 Years (SN 29500 standard, temperature 25°C, operating cycle 21%)
224 Years (SN 29500 standard, temperature 40°C, operating cycle 34.25%)
92 Years (SN 29500 standard, temperature 40°C, operating cycle 100%)
Insulation characteristics
Protection class I (Protective grounding of all conductive housing parts)
Overvoltage category III (With protection modules plugged in)
II (Without protection modules)
Pollution degree 2
Switch functions
Diagnostic functions RMON History
LLDP (Link Layer Discovery Protocol)
SNMP traps
N:1-Portmirroring
ACD (Address Conflict Detection)
Basic functions Store-and-forward switch, complies with IEEE 802.3
Filter functions Port prioritization
VLAN (up to 32 VLANs)
IP parameterization DHCP client
BootP
Static IP address
MAC address table 8k
Management Web-based management (HTTP/HTTPS)
SNMPv2/v3
Command-line interface (Telnet, SSH)
Redundancy RSTP (Rapid Spanning Tree Protocol)
Large Tree Support
FRD (Fast Ring Detection)
Additional functions Jumbo frames
Time synchronization SNTP (Simple Network Time Protocol)
Security functions
Basic functions Store-and-forward switch, complies with IEEE 802.3

Supply
Supply voltage range 100 V AC ... 240 V AC -15 % ... +10 % (Single-phase)
Connection method Push-in spring connection
Rated insulation voltage 3 kV AC (Input / output, IEC/EN 60950-1)

Supply
Connection method Push-in spring connection
Conductor cross section flexible, with ferrule without plastic sleeve 0.2 mm² ... 4 mm²
Conductor cross section, flexible, with ferrule, with plastic sleeve 0.2 mm² ... 4 mm²
2 conductors with the same cross section, flexible, with TWIN ferrule with plastic sleeve 0.5 mm² ... 1.5 mm²
Conductor cross section, flexible 0.20 mm² ... 6.00 mm²
Conductor cross section, rigid 1.00 mm² ... 6.00 mm²
Conductor cross section, flexible [AWG] 24 ... 10
Stripping length 10 mm

Degree of protection IP65 (in accordance with DIN EN 60529: Complete touch protection, dust cannot enter, spray water from any direction)
Impact strength IK10 (in accordance with IEC 62262: Impact energy of 20 J, corresponds to 5 kg from a height of 40 cm)
Ambient temperature (operation) -40 °C ... 70 °C (>50°C derating)
Ambient temperature (storage/transport) -40 °C ... 85 °C
Altitude 2000 m
Permissible humidity (operation) 10 % ... 95 % (non-condensing)

Other resistance UV-resistant in accordance with UL746C, f1 listing/rating Outdoor housing, subject to 1,000 hour xenon weather testing, 7-day water submergence test
Standards/regulations IEC 62444
Standard designation Strain relief
Housing, bromine: < 900 ppm, chlorine: < 900 ppm, total halogen content: < 1500 ppm
Standards/regulations IEC 61249-2-21
Standard designation Halogen-free
Standards/regulations DIN EN 45545-2, requirement set R22, hazard level HL3
Standard designation Fire protection

CE
Certificate CE-compliant
UL, USA / Canada
Identification Listed
UL 61010-1, 3rd Edition
UL 61010-2-201, 2nd Edition
CAN/CSA C22.2 No. 61010-1-12
CSA C22.2 No. 61010-2-201:18
Corrosive gas test
Identification ISA-S71.04-1985 G3 Harsh Group A

Electromagnetic compatibility Conformance with EMC Directive 2014/30/EU
Conducted noise emission EN 61000-6-3 Class B, domain of use: residential and small commercial
Noise emission EN 61000-6-4, Class B, domain of use: residential and small commercial
Noise immunity EN 61000-6-2
Electrostatic discharge
Standards/regulations EN 61000-4-2
Electrostatic discharge
Contact discharge ± 6 kV
Discharge in air ± 8 kV
Indirect discharge ± 6 kV
Comments Criterion B
Electromagnetic HF field
Standards/regulations EN 61000-4-3
Electromagnetic HF field
Frequency range 80 MHz ... 3 GHz (80% amplitude modulation with 1 kHz)
Field intensity 10 V/m
Comments Criterion A
Fast transients (burst)
Standards/regulations EN 61000-4-4
Fast transients (burst)
Input ± 2.2 kV (1 minute)
Signal ± 2.2 kV (1 minute)
Comments Criterion B
Surge current load (surge)
Standards/regulations EN 61000-4-5
Surge current load (surge)
Input ± 1 kV (AC supply, line to line)
± 2 kV (AC supply, line to ground)
Conducted interference
Standards/regulations EN 61000-4-6
Conducted interference
Frequency range 0.15 MHz ... 80 MHz (80% amplitude modulation with 1 kHz)
Comments Criterion A
Voltage 10 V
Emitted interference
Standards/regulations EN 61000-6-4
Comments Class B, domain of use: residential and small commercial
Criterion A Normal operating behavior within the specified limits.
Criterion B Temporary impairment to operational behavior that is corrected by the device itself.

Chave de encomenda 1108542
Pcs./Emb 1 Unidade
Quantidade mínima de pedido 1 Unidade
Chave comercial DNC
Chave de produto DNC371
GTIN 4063151015114
Peso por unidade (inclusive embalagem) 4 999,0 GRM
Peso por unidade (excluindo embalagem) 4 300,0 GRM
Número do imposto alfandegário 85176200
País de origem DE


ECLASS

ECLASS-9.0 27180590
ECLASS-10.0.1 27180590
ECLASS-11.0 27180590

cULus Listed


REACh SVHC Lead 7439-92-1

Vantagens

Cost savings with an all-in-one solution that provides all functions in a single device
Significant time savings with adapter for wall and mast mounting
Minimal wiring effort
Replaceable surge protection
A wide range of alarm messages via SNMP, such as in the event of sabotage attempts or defective surge protection
Advanced PoE management for reliable operation of IP cameras
Quick and easy startup and configuration via web-based management or the FL Network Manager software