EV-T2M3SE24-SET/CIRCONTROL - Infrastructure charging socket - 1025434

Product type	Infrastructure charging socket
Product family	CHARX connect
Design	with square protective cover
Charging standard	Type 2
Charging mode	Mode 3, Case B
Affixed logo	PHOENIX CONTACT logo

Type of signal transmission	Pulse width modulation
Note on the connection method	Crimp connection, cannot be disconnected
Pin assignment (Power contacts)
Number	5 (L1, L2, L3, N, PE)
Rated voltage	480 V AC
Rated current	32 A
Pin assignment (Signal contacts)
Number	2 (CP, PP)
Rated voltage	30 V AC
Rated current	2 A
Locking actuator
Locking actuator	24 V, 4-pos.
Locking actuator		Top center position
Possible power supply range at the motor	22 V ... 26 V
Maximum voltage for locking detection	30 V
Typical motor current for locking	0.05 A
Reverse current of the motor	max. 0.5 A
Max. dwell time with reverse current	1 s
Recommended adaptation time	600 ms
Pause time after entry or exit path	3 s
Service life insertion cycles	> 10000 load cycles
Lock recognition	available
Mechanical emergency release	available
Ambient temperature (operation)	-30 °C ... 50 °C
Cable length	0.5 m
Cable structure	4 x 0.5 mm²
Bending radius	min. 15 mm
External cable diameter	1.60 mm ±0.02 mm
Cable weight	7.00 kg/km
Cable resistance	≤ 37.1 Ω/m
Single wire, color	BU/RD, BU/GN, BU/YE, BU/BN

Cable length	1.5 m (AC cables)
Cable length		0.5 m (Locking actuator cables)
Cable type	Single-core wires connected at one end
Cable structure	5x 6.0 mm² + 2x 0.5 mm²

Mechanical data
Insertion/withdrawal cycles	> 10000
Insertion force	< 100 N
Withdrawal force	< 100 N

Ambient conditions
Ambient temperature (operation)	-30 °C ... 50 °C
Ambient temperature (storage/transport)	-40 °C ... 80 °C
Altitude	5000 m (above sea level)

Mounting type Infrastructure charging socket	Rear panel mounting (0 to 90 degree frontal inclination possible)
Mounting type Infrastructure charging socket		Front mounting (only possible when the locking actuator is removed (see EV-T2M3SE…E00 versions))
Mounting type Protective cover	rear (available separately)
Mounting hole diameter	7.00 mm (ø)

N.º de artigo	1025434
Pcs./Emb	1 Unidade
Quantidade mínima de pedido	1 Unidade
Chave comercial	XWB
Chave de produto	XWBADC
GTIN	4055626517230
País de origem	A informação sobre o país de origem é fornecida com a entrega.

EV-T2M3SE24-SET/CIRCONTROL - Infrastructure charging socket

1025434

EU RoHS
Cumpre os requisitos de substância segundo a Diretiva RoHS	Sim
isenções tanto quanto conhecido	6(c)
China RoHS
Environment friendly use period (EFUP)	EFUP-10 Uma lista de declaração de acordo com a RoHS da China relativa a artigos encontra-se na área de transferências do respetivo artigo, em "Declaração do fabricante". Para todos os artigos com EFUP-E não é emitida nem necessária uma tabela de declaração de acordo com a RoHS da China.
EU REACH SVHC
Nota sobre as substâncias candidatas ao REACH (n.º CAS)	Lead (n.º CAS: 7439-92-1)

Standards
Standards/regulations	IEC 62196-2