This optical signal element is designed to be part of a modular signal tower. According to your requirements, a signal tower can be combined as desired, from a maximum of five signal elements. Set up to a maximum of five optical signal elements or up to four optical and one audible signal element. Only use an audible signal element as the top element. A bayonet locking system establishes the mechanical and electrical connection between the elements. Connection elements with spring-cage connection can be used for electrical connection of the signal tower. Various accessories are available to assemble the signal tower.
PSD-S 50 OE LED RD
-
Optical element
1018261
Permanent light element, 16 V DC ... 26 V DC, red, LED
Detalhes dos produtos
| Note on application | |
| Note on application | Only for industrial use |
| Product type | Signal element |
| Product family | PSD-S 50 |
| Area of application | Signal tower |
| Base | B15d (bayonet) |
| General | |
| Input voltage | 24 V DC |
| Nominal input voltage range | 16 V DC ... 26 V DC |
| Maximum inrush current | max. 500 mA |
| Current consumption | max. 45 mA |
| Source of light type | LED |
| Service life electrical | max. 100,000 h |
| Optical signal type | Permanent light |
| Dimensional drawing |
|
| Height | 61.5 mm |
| Diameter | 50 mm |
| Calotte color | red |
| Material | Polycarbonate PC |
| Ambient conditions | |
| Degree of protection | IP65 (when installed or with end cover) |
| Ambient temperature (operation) | -30 °C ... 60 °C |
| Electromagnetic compatibility | Conformance with EMC Directive 2014/30/EU |
| Mounting type | Plug-in mounting |
| Assembly note | Rubber seal pre-installed for each element |
| Mounting position | any |
Vantagens
High light and color intensity
Low power consumption
Degree of protection IP65