FL SWITCH 1701 7POE
-
Industrial Ethernet Switch
1119230
PoE+ Ethernet switch, 8 Ethernet ports in M12 format, automatic detection of the data transmission speed of 10/100/1000 Mbps, jumbo frames up to 9600 bytes, coupling of network segments with different transmission speeds, autocrossing function, degree of protection IP67
Detalhes dos produtos
| Dimensional drawing |
|
| Width | 60 mm |
| Height | 226 mm |
| Depth | 102 mm |
| Drill hole spacing | 210 mm |
| Note on application | NOTE: Meet noise immunity requirements Connect FE using a mounting screw when mounting on a conductive surface. When mounting on a non-conductive surface, FE is connected using the mounting screw via a cable lug. |
| Note on application | As things stand now, we are preparing the product so that, as of December 11, 2027, it will comply with the requirements of the EU Cyber Resilience Act (CRA) based on the information currently available regarding the CRA. |
| Color | nickel color |
| Material base plate | Die-cast aluminum, corrosion-resistant |
| Housing material | Zinc die-cast, surface bronzed and nickel-plated |
| Housing surface material | nickel-plated |
| Mounting type | Panel mounting |
| Ethernet | |
| Number of interfaces | 1 |
| Connection method | M12 connector, X-coded |
| Note on the connection method | Auto negotiation and autocrossing |
| Transmission speed | 10/100/1000 Mbps |
| Transmission physics | Copper |
| Transmission length | 100 m (per segment) |
| Signal LEDs | Data receive, link status |
| No. of channels | 1 (M12 ports) |
| Ethernet (PoE) | |
| Connection method | M12 connector, 8-pos. |
| Note on the connection method | X-coded |
| Transmission speed | 10/100/1000 Mbps |
| Transmission physics | Copper |
| Transmission length | 100 m (per segment) |
| Signal LEDs | Data receive, link status, PoE |
| No. of channels | 7 (RJ45 PoE ports) |
| Output power (Total) | max. 150 W |
| Output power (per port) | max. 60 W |
| Product type | Switch |
| Product family | Unmanaged PoE Switch 1000 |
| Type | Stand-alone |
| MTTF | 249.43 Years (SN 29500 standard, temperature 25°C, operating cycle 21%) |
| 107.99 Years (SN 29500 standard, temperature 40°C, operating cycle 34.25%) | |
| 30.14 Years (SN 29500 standard, temperature 70°C, operating cycle 100%) | |
| Special properties | The product is being prepared for compliance with the Cyber Resilience Act (CRA) |
| Signal delay | ≥ 1.9 µs (Store-and-Forward mode, 10/100/1000 Mbps, depending on the frame size) |
| Insulation characteristics | |
| Protection class | III (IEC 61140, EN 61140, VDE 0140-1) |
| Switch functions | |
| Basic functions | PSE, complies with IEEE 802.3af/at/bt |
| Autonegotiation | |
| Store and Forward switching mode | |
| 10/100/1000 Mbps | |
| Jumbo frames with up to 9600 bytes | |
| 8 priority classes | |
| PROFINET conformance class | Conformance Class A |
| MAC address table | 16 k |
| Status and diagnostic indicators | LEDs: US1, US2 (power supply), Fail (alarm contact), 3 LEDs per Ethernet port (Link, Activity, and PoE Status) |
| Additional functions | Autonegotiation |
| Security functions | |
| Basic functions | PSE, complies with IEEE 802.3af/at/bt |
| Autonegotiation | |
| Store and Forward switching mode | |
| 10/100/1000 Mbps | |
| Jumbo frames with up to 9600 bytes | |
| 8 priority classes | |
| Power consumption | 168 W (Vin = Min, Tamb = Max, POE = 150 W, 100% data traffic on all connected ports) |
| Local diagnostics | US Supply voltage US Green LED |
| Maximum power dissipation for nominal condition | 18 W (Vin = Min, Tamb = Max, POE = 150 W, 100% data traffic on all connected ports) |
| Test section | 24 V supply / functional ground 500 V DC 1 min |
| Ethernet interface/all other potentials 2.25 kV DC 1 min | |
| Transmission medium | Copper |
| Supply | |
| Supply voltage (DC) | 24 V DC (M12 connector) |
| Supply voltage range | 18.7 V DC ... 30.5 V DC |
| Power supply connection | via M12 connector, L-coded |
| Residual ripple | 3.6 VPP |
| Max. current consumption | 10 A (Maximum, nominal load) |
| Typical current consumption | 300 mA (at US = 24 V DC and 25 °C ambient temperature) |
| Supply: Module electronics | |
| Supply voltage | 24 V DC |
| Supply voltage range | 18.7 V DC ... 30.5 V DC (including ripple) |
| Supply voltage | |
| Connection method | M12 connector, L-coded |
| Ambient conditions | |
| Degree of protection | IP65 |
| IP66 | |
| IP67 | |
| IP68 | |
| Ambient temperature (operation) | -40 °C ... 50 °C (observe derating) |
| Ambient temperature (storage/transport) | -40 °C ... 70 °C |
| Permissible humidity (operation) | 10 % ... 95 % |
| Permissible humidity (storage/transport) | 10 % ... 95 % (non-condensing) |
| Shock (operation) | 30g (EN 60068-2-27) |
| Vibration (operation) | in acc. with IEC 60068-2-6: 5g, 150 Hz |
| Air pressure (operation) | 86 kPa ... 108 kPa (2000 m above mean sea level) |
| Air pressure (storage/transport) | 66 kPa ... 108 kPa (3500 m above sea level) |
| Electromagnetic compatibility | Conformance with EMC Directive 2014/30/EU |
| Conformance with EMC directives | EN 61000-6-2 EN 61000-4-2 (ESD) Criterion B |
| EN 61000-6-2 EN 61000-4-3 (electromagnetic fields) Criterion A | |
| EN 61000-6-2 EN 61000-4-4 (EFT burst) Criterion A | |
| EN 61000-6-2 EN 61000-4-5 (surge) Criterion A | |
| EN 61000-6-2 EN 61000-4-6 (line noise immunity) Criterion A | |
| EN 61000-6-4 (conducted interference) Class A | |
| EN 61000-6-4 Class A | |
| Noise immunity | EN 61000-6-2:2019 |
| Noise emission | |
| Standards/regulations | EN_61000-6-4:2019 |
| Functionality | |
| Basic functions | PSE, complies with IEEE 802.3af/at/bt |
| Autonegotiation | |
| Store and Forward switching mode | |
| 10/100/1000 Mbps | |
| Jumbo frames with up to 9600 bytes | |
| 8 priority classes | |
| Status display | LEDs: US1, US2 (power supply), Fail (alarm contact), 3 LEDs per Ethernet port (Link, Activity, and PoE Status) |
Vantagens
Gigabit support
Robust IP67 housing
Easy panel mounting
PoE+ supply to 7 ports
Jumbo frames with up to 9600 bytes
Metal housing