UMK- 8 RM/KSR-G 24/21/PLC
   - 
  Active module
    
      2979485
      
      
    
  
      VARIOFACE output module, with 8 miniature relays, 1 changeover contact each, plugged, for 24 V DC (including relays)
Detalhes dos produtos
| Product type | Interface module | 
| No. of channels | 8 | 
| Operating mode | 100% operating factor | 
| Mechanical service life | 3x 107 cycles | 
| Compatible components | Miniature relay, REL-MR- 24DC/21HC | 
| With components | yes | 
| Insulation characteristics | |
| Overvoltage category | III | 
| Pollution degree | 2 | 
| Rated insulation voltage | 300 V AC | 
| Rated surge voltage | 4 kV (Basic insulation between output contact current paths) | 
| 6 kV (Safe isolation and reinforced insulation between input circuit and output contact paths) | |
| Supported controller SIEMENS S7-1500 | |
| Suitable I/O card | 6ES7522-1BH00-0AB0 | 
| 6ES7522-1BH01-0AB0 | |
| 6ES7522-1BL00-0AB0 | |
| 6ES7522-1BL01-0AB0 | |
| Supported controller SIEMENS S7-300 / ET 200 M | |
| Suitable I/O card | CPU 313C-2DP | 
| CPU 314C-2DP | |
| CPU 314C-2PtP | |
| 6ES7322-1BH01-0AA0 | |
| 6ES7322-1BL00-0AA0 | |
| 6ES7323-1BH01-0AA0 | |
| 6ES7323-1BL00-0AA0 | |
| CPU 313C | |
| CPU 313C-2PtP | |
| Supported controller SIEMENS S7-400 | |
| Suitable I/O card | 6ES7422-1BL00-0AA0 | 
| 6ES7422-7BL00-0AB0 | |
| Supported controller ALLEN-BRADLEY PLC 5 | |
| Suitable I/O card | 1771 OBN | 
| Supported controller ALLEN-BRADLEY SLC 500 | |
| Suitable I/O card | 1746 OB 32 | 
| Supported controller ABB S800 I/O | |
| Suitable I/O card | DO810 | 
| DO840 | |
| Supported controller EMERSON DeltaV | |
| Suitable I/O card | VE4002S1T1B3 | 
| VE4002S1T2B3 | |
| VE4002S1T2B3 Series 2 | |
| VE4002S1T2B6 | |
| Supported controller GE-FANUC RX3i | |
| Suitable I/O card | IC694MDL754 | 
| Supported controller HONEYWELL Experion PKS C200 | |
| Suitable I/O card | TC-ODD 321 | 
| Supported controller MITSUBISHI MELSEC L | |
| Suitable I/O card | LY41PT1P | 
| LY42PT1P | |
| QY82P | |
| Supported controller MITSUBISHI MELSEC Q | |
| Suitable I/O card | QY81P | 
| Nominal input voltage UN | 24 V DC | 
| Input voltage range in reference to UN | 0.8 ... 1.1 | 
| Input voltage range | 19.2 V DC ... 26.4 V DC | 
| Typical input current at UN | 23 mA | 
| Typical response time | 9 ms | 
| Typical release time | 10 ms | 
| Protective circuit | Freewheeling diode; Freewheeling diode | 
| Reverse polarity protection; Polarity protection diode | |
| Operating voltage display | Green LED | 
| Status display/channel | Yellow LED | 
| Compatible components | Miniature relay, REL-MR- 24DC/21HC | 
| Switching | |
| Contact switching type | 1 changeover contact | 
| Contact material | AgCdO | 
| Maximum switching voltage | 250 V AC/DC | 
| Limiting continuous current | 5 A | 
| Maximum inrush current | 6 A | 
| Min. switching current | 10 mA | 
| Interrupting rating (ohmic load) max. | 120 W (24 V DC, τ = 0 ms) | 
| 58 W (48 V DC, τ = 0 ms) | |
| 48 W (60 V, τ = 0 ms) | |
| 50 W (110 V DC, τ = 0 ms) | |
| 80 W (220 V DC, τ = 0 ms) | |
| 1250 VA (250 V AC, τ = 0 ms) | |
| Field level | |
| Connection method | Screw connection | 
| Stripping length | 7 mm | 
| Screw thread | M3 | 
| Number of connections | 24 | 
| Conductor cross-section rigid | 0.2 mm² ... 4 mm² | 
| Conductor cross-section flexible | 0.2 mm² ... 2.5 mm² | 
| Conductor cross-section AWG | 24 ... 12 | 
| Tightening torque | 0.5 Nm ... 0.6 Nm | 
| Controller level | |
| Connection method | IDC/FLK pin strip | 
| Number of connections | 1 | 
| Number of positions | 14 | 
| Pitch | 2.54 mm | 
| Supply | |
| Connection method | Screw connection | 
| Stripping length | 8 mm | 
| Screw thread | M3 | 
| Number of connections | 2 | 
| Conductor cross-section rigid | 0.2 mm² ... 4 mm² | 
| Conductor cross-section flexible | 0.2 mm² ... 2.5 mm² | 
| Conductor cross-section AWG | 24 ... 12 | 
| Status display present | yes | 
| Width | 135 mm | 
| Height | 77 mm | 
| Depth | 54 mm | 
| Color | green (RAL 6021) | 
| Ambient conditions | |
| Degree of protection | IP00 | 
| Ambient temperature (operation) | -20 °C ... 50 °C | 
| Ambient temperature (storage/transport) | -20 °C ... 70 °C | 
| Standards/regulations | EN 61010-2-201 | 
| IEC 60664 | 
| Mounting type | DIN rail mounting | 
| Assembly note | in rows with zero spacing | 
| Mounting position | any | 
| Notes on operation | Observe the maximum switching power of the relays used | 
| Notes on operation | Do not connect adjacent channels to SELV/ PELV and voltages dangerous to the touch. | 
| Notes on operation | The outputs are not suitable for switching different line conductors. The sum of the switching voltages used for adjacent outputs must not exceed the rated insulation voltage value | 
| Notes on operation | The necessary requirements for insulation (basic insulation or reinforced insulation) from adjacent modules (in DIN-rail direction) must be realized by applying suitable measures (e. g., partition plates). | 
| Notes on operation | For proper use, the specifications of the installation directive (see Downloads) must be observed. For applications or use with third-party products, the specifications, and the safety and warning instructions of the respective third-party manufacturer must also be met. | 
| N.º de artigo | 2979485 | 
| Pcs./Emb | 1 Unidade | 
| Quantidade mínima de pedido | 1 Unidade | 
| Observação | Produção ligada a pedido (sem devolução) | 
| Chave comercial | DK2 | 
| Chave de produto | DK2191 | 
| GTIN | 4017918130350 | 
| Peso por unidade (inclusive embalagem) | 380 g | 
| Peso por unidade (excluindo embalagem) | 380 g | 
| Número do imposto alfandegário | 85364190 | 
| País de origem | DE | 
ECLASS
| ECLASS-13.0 | 27141152 | 
| ECLASS-15.0 | 27141152 | 
ETIM
| ETIM 9.0 | EC002780 | 
UNSPSC
| UNSPSC 21.0 | 39121400 | 
| EU RoHS | |
| Cumpre os requisitos de substância segundo a Diretiva RoHS | Sim | 
| isenções tanto quanto conhecido | 7(a) | 
| China RoHS | |
| Environment friendly use period (EFUP) | EFUP-50 Uma lista de declaração de acordo com a RoHS da China relativa a artigos encontra-se na área de transferências do respetivo artigo, em "Declaração do fabricante". Para todos os artigos com EFUP-E não é emitida nem necessária uma tabela de declaração de acordo com a RoHS da China. | 
| EU REACH SVHC | |
| Nota sobre as substâncias candidatas ao REACH (n.º CAS) | Hexahydromethylphthalic anhydride (n.º CAS: Não aplicável) | 
| Lead (n.º CAS: 7439-92-1) | |
| SCIP | 907ab456-4326-49c3-966e-7ef2e6a44d41 | 
Produtos compatíveis
Vantagens
LED status indicator per signal path and supply voltage
        Freewheeling and polarity protection diode for each signal path
        Plug-in miniature relays, each with a changeover contact
        Phoenix Contact S.A.
        
        Sintra Business Park, Edifício n°1 Zona Industrial da Abrunheira, sala 0M, 2710-089 SINTRA