DCS 5,7 L 1F R BP 1 7035
-
Electronics housing
2203175
Display housing, 5.7", light gray, consisting of two half shells, four front plates with screws and battery pack contacts, window on the left. Front 1.1 mm recessed, keypad area on the right, recessed for battery pack
Detalhes dos produtos
| Product type | Complete housing |
| Housing type | Display carrier |
| Housing series | DCS |
| Product family | DCS 5,7.. |
| Ventilation openings present | no |
| Battery compartment | for APP battery housing |
| Display | |
| Diagonal | 5.7 in. / 146 cm (Window for display) |
| Dimensional drawing |
|
| Width | 226 mm |
| Height | 158 mm |
| Depth | 40 mm |
| Dimensions | 118 mm x 88 mm (Window for display, left position) |
| 44 mm x 104.8 mm x 1 mm (recessed area on the front, right position for membrane keypad) | |
| 28.5 mm x 3.5 mm (Opening for the membrane keypad cable) | |
| 21.8 mm x 62.8 mm (Front with faceplate, position above, quantity 2) | |
| 20 mm x 104 mm (Side with faceplate, position left and right, quantity 1) | |
| Front with faceplate | top, 2 x (63 mm x 21.9 mm) |
| left, 1 x (104 mm x 20 mm) | |
| right, 1 x (104 mm x 20 mm) | |
| PCB design | |
| PCB thickness | 1.4 mm ... 1.8 mm |
| Color (Housing) | light gray (RAL 7035) |
| Material (Housing) | ABS |
| Flammability rating according to UL 94 | V0 |
| CTI according to IEC 60112 | 400 ≤ CTI < 600 |
| Insulating material | II |
| Housing material | ABS |
| Surface characteristics | untreated |
| Glow-wire test | |
| Specification | IEC 60695-2-11:2014-02 |
| Temperature | 850 °C |
| Time of exposure | 30 s |
| Thermal stability / ball thrust test | |
| Specification | IEC 60695-10-2:2014-02 |
| Temperature | 80 °C |
| Test duration | 1 h |
| Force | 20 |
| Degree of protection (IP code) | |
| Specification | IEC 60529:1989-11 + AMD 1:1999-11 + AMD 2:2013-08 |
| Ambient conditions | |
| Max. IP code to attain | IP54 |
| Number of PCB holders | 2 |
| Thickness of the PCB | 1.4 mm ... 1.8 mm |
| Mounting type | Panel mounting (with accessories as an option) |
| Wall fastening | yes |
| Mounting position | any |
Vantagens
Display housing for portable and stationary operating panels
Integration of TFT display and membrane keypads
Up to IP54 degree of protection
Shock-resistant ABS plastic
Flammability rating V0 in accordance with UL 94
Perguntas mais frequentes
What IP degree of protection can I achieve with the DCS display carriers?
If the accessories are used, the DCS offers a maximum degree of protection of IP54. This means that there is full touch protection. In addition, your electronics are protected against dust in harmful quantities and splash water on all sides. For this... Ver mais
If the accessories are used, the DCS offers a maximum degree of protection of IP54. This means that there is full touch protection. In addition, your electronics are protected against dust in harmful quantities and splash water on all sides. For this, select the seal “DCS ... Seal” under Accessories.
Ver menosHow can I attach the display to the housing?
With the mounting sets, it is possible to mount the displays without much effort. The mounting sets can be found under “Accessories”. You can also easily assemble your housing in the configurator. The corresponding mounting set is output. You can fin... Ver mais
With the mounting sets, it is possible to mount the displays without much effort. The mounting sets can be found under “Accessories”. You can also easily assemble your housing in the configurator. The corresponding mounting set is output. You can find the configurator by entering the web code #0512 into the search field on our website.
Ver menosCan I have individual breakouts inserted in the DCS display carrier?
Yes, breakouts and other customizations are possible. Our service center is available for this. To do so, enter the web code #0685 into the search field on our website and use the contact form.
Are other displays available, such as touch displays?
Yes, additional displays are available on request.
Which connection technology can be used in the display carrier?
The display carrier provides plenty of space for comprehensive connection technology. From SPE and SAC connectors to classic RJ45 jacks, many different connection technologies can be integrated. Simply contact our service center for this. To do so, e... Ver mais
The display carrier provides plenty of space for comprehensive connection technology. From SPE and SAC connectors to classic RJ45 jacks, many different connection technologies can be integrated. Simply contact our service center for this. To do so, enter the web code #0685 into the search field on our website and use the contact form.
Ver menosWhich tool is required for assembly of the display carrier?
Only a bladed PH 0 screwdriver is required for mounting the DCS. This can be found in the “Accessories” area or under item number 1212558.