Bridge failures lasting several seconds with the buffer modules from the QUINT range for DIN rails. The QUINT BUFFER combines an electronic switch-over unit and maintenance-free, capacitor-based energy storage in the same housing.
QUINT4-BUFFER/24DC/20
-
Buffer module
2907913
QUINT buffer module with maintenance-free capacitor-based energy storage for DIN rail mounting, input: 24 V DC, output: 24 V DC/20 A, including mounted UTA 107 universal DIN rail adapter.
Detalhes dos produtos
Input voltage range | 22.5 V DC ... 30 V DC |
Fixed backup threshold | < 22 V DC |
Voltage type of supply voltage | DC |
Current consumption Imax (UN, IOUT = IStat.Boost, ICharge = max) | 26 A (max.) |
Current consumption INo-Load(UN, IOUT = 0, Icharge = 0) | 0.2 A (No-load) |
Current consumption Icharge (UN, IOUT = 0, Icharge = max) | 0.6 A (charging process) |
Buffer time | 0.2 s (20 A) |
2 s (2 A) |
Efficiency | > 98 % (with charged energy storage device) |
Connection in parallel | no |
Connection in series | no |
Mains operation | |
Output voltage | 24 V DC (depending on the input voltage) |
Output current IN | 20 A |
Power loss nominal load max. | < 6 W |
Buffer mode | |
Output voltage | typ. 22 V DC |
Output current IN | 20 A (depending on output current) |
Static Boost (IStat.Boost) | 25 A |
Power loss nominal load max. | < 6 W |
Input | |
Nominal capacity | 1 mAh |
General | |
IQ-Technology | no |
Signal state UIN OK | |
Connection labeling | 3.1, 3.2 |
Switching output | Electronic relays (OptoMOS) |
State (configurable) | UIn OK |
Output voltage | 30 V DC |
Output can be loaded | 200 mA |
LED status indicator | green (UIn OK) |
Signal threshold | Input voltage in the valid range |
Signal state Ready | |
Connection labeling | 3.3 |
Switching output | Transistor output, active |
State (configurable) | Ready |
State condition (configurable) | State of charge = 100% or buffer mode |
Output voltage | 24 V (UN - 2 V (typical)) |
Output can be loaded | 20 mA |
Signal ground SGnd | |
Connection labeling | 3.4 |
Function | Signal ground |
Reference potential | 3.3 Ready |
Insulation voltage input, output / housing | 500 V |
Product type | Buffer module |
Product family | QUINT BUFFER |
MTBF (IEC 61709, SN 29500) | 2497464 h (40 °C) |
Insulation characteristics | |
Protection class | Special application (SELV input voltage, hazardous voltages are generated in the device). |
Overvoltage category | I |
Degree of pollution | 2 |
Life expectancy (electrolytic capacitors) | |
Current | 20 A |
Temperature | 30 °C |
Time | 288935 h |
Life expectancy (electrolytic capacitors) | |
Current | 20 A |
Temperature | 40 °C |
Time | 144468 h |
Life expectancy (electrolytic capacitors) | |
Current | 20 A |
Temperature | 45 °C |
Time | 102154 h |
Life expectancy (electrolytic capacitors) | |
Current | 20 A |
Temperature | 50 °C |
Time | 72234 h |
Life expectancy (electrolytic capacitors) | |
Current | 20 A |
Temperature | 60 °C |
Time | 36117 h |
Item dimensions | |
Width | 56 mm |
Height | 130 mm |
Depth | 125 mm |
Installation dimensions | |
Installation distance right/left | 0 mm / 0 mm |
Installation distance top/bottom | 50 mm / 50 mm |
Assembly note | alignable: horizontally 0 mm, vertically 50 mm |
Mounting position | horizontal DIN rail NS 35, EN 60715 |
Housing material | Metal |
Ambient conditions | |
Degree of protection | IP20 |
Ambient temperature (operation) | -25 °C ... 70 °C (> 40 °C Derating: 1 %/K / > 60 °C Derating: 2.5 %/K) |
Ambient temperature (storage/transport) | -40 °C ... 70 °C |
Ambient temperature (start-up type tested) | -40 °C |
Maximum altitude | ≤ 4000 m |
Climatic class | 3K3 (in acc. with EN 60721) |
Max. permissible relative humidity (operation) | ≤ 95 % |
Electrical safety | |
Standard designation | Electrical safety |
Standards/specifications | IEC 60950-1/VDE 0805 (SELV) |
UL | |
Identification | UL Listed UL 508 |
UL | |
Identification | UL/C-UL Recognized UL 60950-1 |
UL | |
Identification | UL ANSI/ISA-12.12.01 Class I, Division 2, Groups A, B, C, D (Hazardous Location) |
Electromagnetic compatibility | Conformance with EMC Directive 2014/30/EU |
Low Voltage Directive | Conformance with Low Voltage Directive 2014/35/EC |
EMC requirements for noise emission | EN 61000-6-3 |
EN 61000-6-4 | |
EMC requirements for noise immunity | EN 61000-6-1 |
EN 61000-6-2 | |
Noise immunity | Immunity in accordance with EN 61000-6-2 (industrial) |
Noise emission | |
Standards/regulations | EN 55016 |
EN 61000-6-3 | |
Electrostatic discharge | |
Standards/regulations | EN 61000-4-2 |
Electrostatic discharge | |
Contact discharge | 6 kV (Test Level 3) |
Discharge in air | 8 kV (Test Level 3) |
Comments | Criterion A |
Electromagnetic HF field | |
Standards/regulations | EN 61000-4-3 |
Electromagnetic HF field | |
Frequency range | 80 MHz ... 6 GHz |
Test field strength | 10 V/m |
Comments | Criterion A |
Fast transients (burst) | |
Standards/regulations | EN 61000-4-4 |
Fast transients (burst) | |
Input | 2 kV (Test Level 3 - asymmetrical) |
Output | 2 kV (Test Level 3 - asymmetrical) |
Signal | 2 kV (Test Level 3 - asymmetrical) |
Comments | Criterion A |
Surge voltage load (surge) | |
Input | 1 kV (Test Level 2 - symmetrical) |
2 kV (Test Level 3 - asymmetrical) | |
Output | 1 kV (Test Level 2 - symmetrical) |
2 kV (Test Level 3 - asymmetrical) | |
Signal | 1 kV (Test Level 2 - asymmetrical) |
Comments | Criterion A |
Conducted interference | |
Standards/regulations | EN 61000-4-6 |
Conducted interference | |
Frequency range | 0.15 MHz ... 80 MHz |
Comments | Criterion A |
Voltage | 10 V |
Criteria | |
Criterion A | Normal operating behavior within the specified limits. |
Criterion B | Temporary impairment to operational behavior that is corrected by the device itself. |
N.º de artigo | 2907913 |
Pcs./Emb | 1 Unidade |
Quantidade mínima de pedido | 1 Unidade |
Chave comercial | CMU |
Chave de produto | CMUIE3 |
Página de catálogo | Página 345 (C-4-2019) |
GTIN | 4055626309040 |
Peso por unidade (inclusive embalagem) | 1 049 g |
Peso por unidade (excluindo embalagem) | 760,55 g |
Número do imposto alfandegário | 85322200 |
País de origem | CN |
ECLASS
ECLASS-13.0 | 27040692 |
ETIM
ETIM 9.0 | EC002850 |
UNSPSC
UNSPSC 21.0 | 26111700 |
UL Recognized
ID de certificação: E211944EAC
ID de certificação: RU S-DE.BL08.W.00764UL Listed
ID de certificação: E123528cUL Listed
ID de certificação: E123528IECEE CB Scheme
ID de certificação: DE/PTZ/0063cUL Listed
ID de certificação: E199827UL Listed
ID de certificação: E199827EU RoHS | |
Cumpre os requisitos de substância segundo a Diretiva RoHS | Sim |
isenções tanto quanto conhecido | 6(c), 7(a), 7(c)-I |
China RoHS | |
Environment friendly use period (EFUP) |
EFUP-25
Uma lista de declaração de acordo com a RoHS da China relativa a artigos encontra-se na área de transferências do respetivo artigo, em "Declaração do fabricante". Para todos os artigos com EFUP-E não é emitida nem necessária uma tabela de declaração de acordo com a RoHS da China.
|
EU REACH SVHC | |
Nota sobre as substâncias candidatas ao REACH (n.º CAS) | Diboron trioxide (n.º CAS: 1303-86-2) |
Lead monoxide (lead oxide) (n.º CAS: 1317-36-8) | |
Lead (n.º CAS: 7439-92-1) | |
SCIP | bf780566-3baa-40df-a168-e05bbde8eda2 |
EF3.0 Alterações climáticas | |
CO2e kg | 20,84 kg CO2e |
Produtos compatíveis
Vantagens
Space savings, thanks to the compact design
Maintenance-free due to electrolytic capacitors
Thanks to soft start, can also be used with power supplies in the low power range
Phoenix Contact S.A.
Sintra Business Park, Edifício n°1 Zona Industrial da Abrunheira, sala 0M, 2710-089 SINTRA