MCR-T-UI-E-NC
-
Temperature measuring transducer
2814126
MCR-T module, programmable temperature transducer, unconfigured, for thermocouple sensors and resistance temperature detectors, in 2-, 3- or 4-conductor technology, with electrical isolation between input/output and input/auxiliary power
Transferência gratuita disponível.
Downloads
Detalhes dos produtos
| Utilization restriction | |
| EMC note | EMC: class A product, see manufacturer's declaration in the download area |
| Product type | Temperature transmitter |
| Typical cold point errors | 1.5 K |
| Cold point error, max. | ≤ 3 K |
| Maximum power dissipation for nominal condition | 1.51 W |
| Test voltage input/output | 1 kV AC (50 Hz, 60 s) |
| Test voltage input/power supply | 1 kV AC (50 Hz, 60 s) |
| Maximum temperature coefficient | ≤ 0.01 %/K |
| Temperature coefficient, typical | 0.005 %/K |
| Maximum transmission error | ≤ 0.1 % (of maximum range, ±6 mV or ±12 µA at output) |
| Supply | |
| Supply voltage range | 18 V DC ... 30 V DC |
| Typical current consumption | 40 mA |
| Max. current consumption | ≤ 60 mA |
| Signal | |
| Input signal | Temperature |
| Measurement | |
| Configurable/programmable | Yes, unconfigured |
| Sensor types (RTD) that can be used | Pt, Ni, Cu sensors |
| Sensor types that can be used (TC) | U, T, L, J, E, K, N, S, R, B, C, W, HK |
| Temperature measuring range | Depending on sensor type used |
| Temperature measuring range | min. 20 K (RTD, excluding CU10 - 100 K) |
| min. 50 K (TC, except type B 100 K) | |
| : | -200 °C ... 850 °C (freely adjustable) |
| -60 °C ... 180 °C (freely adjustable) | |
| -70 °C ... 500 °C (freely adjustable) | |
| -50 °C ... 160 °C (freely adjustable) | |
| -50 °C ... 200 °C (freely adjustable) | |
| -50 °C ... 180 °C (freely adjustable) | |
| -55 °C ... 150 °C (freely adjustable) | |
| -200 °C ... 600 °C (freely adjustable) | |
| -200 °C ... 400 °C (freely adjustable) | |
| -200 °C ... 900 °C (freely adjustable) | |
| -210 °C ... 1200 °C (freely adjustable) | |
| -226 °C ... 1000 °C (freely adjustable) | |
| -200 °C ... 1372 °C (freely adjustable) | |
| -200 °C ... 1300 °C (freely adjustable) | |
| -50 °C ... 1760 °C (freely adjustable) | |
| -50 °C ... 1760 °C (freely adjustable) | |
| 500 °C ... 1820 °C (freely adjustable) | |
| -18 °C ... 2316 °C (freely adjustable) | |
| -18 °C ... 2316 °C (freely adjustable) | |
| -200 °C ... 800 °C (freely adjustable) | |
| -200 °C ... 850 °C (freely adjustable) | |
| -200 °C ... 850 °C (freely adjustable) | |
| -200 °C ... 850 °C (freely adjustable) | |
| -200 °C ... 850 °C (freely adjustable) | |
| -60 °C ... 180 °C (freely adjustable) | |
| -60 °C ... 180 °C (freely adjustable) | |
| -60 °C ... 180 °C (freely adjustable) | |
| -60 °C ... 180 °C (freely adjustable) | |
| Sensor input current | 250 µA (Resistance thermometer) |
| Linear resistance measuring range | 0 Ω ... 8000 Ω (freely adjustable, min. measuring range 100 Ω) |
| Linear mV signal range | -20 mV ... 2400 mV (freely adjustable, minimum measuring range span of 10 mV) |
| Connection technology | 2-, 3-, 4-conductor |
| Connection method | Pluggable screw connection |
| Protective circuit | Transient protection |
| Surge protection 30 V DC | |
| Frequency: | |
| Configurable/programmable | no |
| Switching: Transistor | |
| Output description | Can carry a load of 100 mA, switches supply voltage (not protected against short-circuit); locked in case of order-specific configuration, otherwise freely programmable through MCR/PI-CONF-WIN |
| Continuous load current | 100 mA |
| Output voltage range | 18 V DC ... 30 V DC (switches supply voltage, not short-circuit resistant) |
| Signal: Voltage output / current output | |
| Configurable/programmable | Yes, unconfigured |
| Voltage output signal | 0 V ... 5 V |
| 0 V ... 10 V | |
| -5 V ... 5 V | |
| -10 V ... 10 V | |
| 10 V ... 0 V | |
| 5 V ... 0 V | |
| 10 V ... -10 V | |
| 5 V ... -5 V | |
| 1 V ... 5 V | |
| Max. voltage output signal | ± 12 V |
| Current output signal | 0 mA ... 20 mA |
| 4 mA ... 20 mA | |
| 20 mA ... 0 mA | |
| 20 mA ... 4 mA | |
| Max. current output signal | 24 mA |
| Output voltage range with wire break | -12 V ... 12 V |
| Output voltage range with overrange/underrange | -12 V ... 12 V |
| Output current range with wire break | 0 A ... 24 mA |
| Output current range with overrange/underrange | 0 A ... 24 mA |
| Load/output load voltage output | ≥ 10 kΩ |
| Load/output load current output | ≤ 500 Ω |
| Ripple | < 20 mVPP |
| Protective circuit | Transient protection |
| D/A converter resolution | ± 12 bit |
| Connection method | Pluggable screw connection |
| Stripping length | 8 mm |
| Screw thread | M3 |
| Conductor cross section rigid | 0.2 mm² ... 2.5 mm² |
| Conductor cross section flexible | 0.2 mm² ... 2.5 mm² |
| Conductor cross section AWG | 24 ... 14 |
| Dimensional drawing |
|
| Width | 17.5 mm |
| Height | 99 mm |
| Depth | 114.5 mm |
| Color | green (RAL 6021) |
| Housing material | Polyamide PA non-reinforced |
| Ambient conditions | |
| Ambient temperature (operation) | -20 °C ... 65 °C |
| CE | |
| Certificate | CE-compliant |
| UL, USA/Canada | |
| Identification | Class I, Div. 2, Groups A, B, C, D or Non-Hazardous Locations |
| GL | |
| Identification | DNV GL |
| Mounting type | DIN rail mounting |
| Mounting position | any |
Vantagens
Freely programmable via MCR/PI-CONF-WIN
With transistor switching output
Measure differential temperatures
Inverse output signal ranges as an option
For resistance thermometers and thermocouples