Os conteúdos que está a visualizar estão concebidos à medida para Portugal. Visualizar conteúdos para Estados Unidos | Selecionar outro país

ECOR-2-BSC2/4X21 - Relay base

1089994

ECOR-2 relay base, for industrial relay with 2 or 4 changeover contacts, screw connection, plug-in option for input/interference suppression modules, for mounting on NS 35/7,5

Este produto precisa de outros produtos para a operação. Acessórios necessários

Detalhes dos produtos

Notes on operation	Do not use to separate SELV / PELV circuits from other circuits, because safe isolation is not guaranteed.
Notes on operation	The outputs are not suitable for switching different outer conductors.
Notes on operation	The system installer must ensure the touch protection of the product (at voltages > 25 V AC/60 V DC). The product is a built-in device without protection against direct contact.
Notes on operation	At least a basic level of insulation is maintained against adjacent modules in the DIN rail direction. If the application has higher requirements on the insulation (reinforced insulation), then these must be realized through suitable measures (e.g. partition plates).

Product type	Relay socket
Product family	ESSENTIAL edition
Operating mode	100% operating factor
Insulation characteristics: Air clearances and creepage distances between the power circuits
Overvoltage category	II
Pollution degree	2

Nominal voltage U_N	≤ 230 V AC/DC
Test voltage relay winding/relay contact	2.5 kV_rms (50 Hz, 1 min.)
Air clearances and creepage distances between the power circuits
Rated insulation voltage	250 V AC
Rated surge voltage	2.5 kV

Input side
Connection method	Screw connection
Stripping length	7 mm
Screw thread	M3
Conductor cross section rigid	0.2 mm² ... 4 mm²
Conductor cross section flexible	0.2 mm² ... 2.5 mm² (without ferrule)
	0.2 mm² ... 1.5 mm² (with ferrule)
Conductor cross section AWG	12
Tightening torque	0.5 Nm ... 0.7 Nm
Output side
Connection method	Screw connection
Stripping length	7 mm
Screw thread	M3
Conductor cross section rigid	0.2 mm² ... 4 mm²
Conductor cross section flexible	0.2 mm² ... 2.5 mm² (without ferrule)
	0.2 mm² ... 1.5 mm² (with ferrule)
Conductor cross section AWG	12
Tightening torque	0.5 Nm ... 0.7 Nm

Width	27 mm
Height	75 mm
Depth Retaining bracket	84 mm (with retaining bracket)

Color	traffic grey B (RAL 7043)

Ambient conditions
Degree of protection	IP20 ()
Degree of protection (Installation location)	≥ IP54 (Installation location)
Ambient temperature (operation)	-25 °C ... 70 °C
Ambient temperature (storage/transport)	-25 °C ... 85 °C
Altitude	≤ 2000 m

Air clearances and creepage distances between the power circuits
Standards/regulations	DIN EN 50178

Mounting type	DIN rail mounting
Assembly note	in rows with zero spacing
Mounting position	any

Dados comerciais

N.º de artigo	1089994
Pcs./Emb	10 Unidade
Quantidade mínima de pedido	10 Unidade
Chave comercial	DKF
Chave de produto	DKF312
GTIN	4055626897837
Peso por unidade (inclusive embalagem)	68,75 g
Peso por unidade (excluindo embalagem)	68 g
Número do imposto alfandegário	85366990
País de origem	CN

Classificações

Certificações

Environmental product compliance

Produtos compatíveis

Acessórios necessários

Acessórios

Phoenix Contact S.A.

Sintra Business Park, Edifício n°1 Zona Industrial da Abrunheira, sala 0M, 2710-089 SINTRA

Fazer uma pergunta (+351) 21 911 2760 pt-info@phoenixcontact.com

ECLASS-13.0	27371603
ECLASS-15.0	27371603

EU RoHS
Cumpre os requisitos de substância segundo a Diretiva RoHS	Sim (Sem regras de exceção)
China RoHS
Environment friendly use period (EFUP)	EFUP-E Nenhuma substância perigosa acima dos valores-limite
EU REACH SVHC
Nota sobre as substâncias candidatas ao REACH (n.º CAS)	Nenhuma substância numa proporção superior a 0,1 % em massa

Automate

Connect

Mark, assemble, and install

Supply, charge, and protect

Switch, Measure and Monitor

ECOR-2-BSC2/4X21 - Relay base

1089994

Detalhes dos produtos

ECLASS

ETIM

UNSPSC

cUL Recognized

UL Recognized

cULus Recognized

Produtos compatíveis

Automate

Connect

Mark, assemble, and install

Supply, charge, and protect

Switch, Measure and Monitor

ECOR-2-BSC2/4X21 - Relay base 1089994

Detalhes dos produtos

ECLASS

ETIM

UNSPSC

Produtos compatíveis

REL-IR-BL/L- 12DC/4X21 - Single relay 1109557

REL-IR-BL/L- 48DC/4X21 - Single relay 1109558

REL-IR-BL/L-110DC/4X21 - Single relay 1109560

REL-IR-BL/L-125DC/4X21 - Single relay 1109561

REL-IR-BL/L-220DC/4X21 - Single relay 1109562

REL-IR-BL/L- 24AC/4X21 - Single relay 1109563

REL-IR-BL/L-115AC/4X21 - Single relay 1109564

REL-IR-BL- 24DC/4X21 - Single relay 1032521

REL-IR-BL-230AC/4X21 - Single relay 1032529

REL-IR-BL/L-230AC/4X21 - Single relay 1032531

REL-IR-BL/L- 24DC/4X21 - Single relay 1032527

REL-IR-BL/L- 24DC/2X21 - Single relay 1032526

REL-IR-BL- 24DC/2X21 - Single relay 1032470

REL-IR-BL/L-230AC/2X21 - Single relay 1032530

REL-IR-BL-230AC/2X21 - Single relay 1032528

REL-IR-BL/L- 12DC/2X21 - Single relay 1109547

REL-IR-BL/L- 48DC/2X21 - Single relay 1109548

REL-IR-BL/L-110DC/2X21 - Single relay 1109550

REL-IR-BL/L-125DC/2X21 - Single relay 1109553

REL-IR-BL/L-220DC/2X21 - Single relay 1109554

REL-IR-BL/L- 24AC/2X21 - Single relay 1109555

REL-IR-BL/L-115AC/2X21 - Single relay 1109556

DB 50- 90 BU - Wire bridge 2821180

DB 50- 90 BK - Wire bridge 2820916

DB 50- 90 GY - Wire bridge 2820929

ECOR-RHM-2L - Relay retaining bracket 1047026

LDP- 12- 24DC - Plug-in module 2833657

DP-12-220 DC - Plug-in module 2907517

LV-120-230AC/110DC - Plug-in module 2833738

V-120-230UC - Plug-in module 2833880

RC-120-230UC - Plug-in module 2833767

MP 2 - Marker labels 2833644

ECOR-2-BSC2/4X21 - Relay base

1089994