SIM-EI- 12DC/TTL/100
-
Miniature solid-state relay
2271141
Input solid-state relay, with protective circuit in input and output circuits, input: 12 V DC, output: TTL logic level, max. 100 mA
Detalhes dos produtos
| Product type | Single solid-state relay |
| Data management status | |
| Date of last data management | 19.03.2025 |
| Test voltage (Input/output) | 2.5 kV (50 Hz, 1 min., input/output) |
| Nominal input voltage UN | 12 V AC |
| Input voltage range in reference to UN | 0.9 ... 1.1 |
| Input voltage range | 10.8 V DC ... 13.2 V DC |
| Switching threshold "0" signal in reference to UN | ≤ 0.4 |
| Switching threshold "1" signal in reference to UN | ≥ 0.8 |
| Typical input current at UN | 5.7 mA |
| Protective circuit | Reverse polarity protection; Polarity protection diode |
| Transmission frequency | 4000 Hz |
| Design of digital output | electronic |
| Output voltage range | 3 V DC ... 5.25 V DC |
| Limiting continuous current | 100 mA |
| Fan out | 1 |
| Voltage drop at max. limiting continuous current | 0.3 V |
| Output circuit | 3-conductor, ground-referenced |
| Protective circuit | Reverse polarity protection; Polarity protection diode |
| Free running; Freewheeling diode | |
| Output resistor | approx. 390 Ω |
| Dimensional drawing |
|
| Width | 13 mm |
| Height | 29 mm |
| Depth | 25 mm |
| Ambient conditions | |
| Ambient temperature (operation) | -20 °C ... 50 °C |
| Ambient temperature (storage/transport) | -20 °C ... 70 °C |
| Standards/regulations | DIN VDE 0110 |
| Assembly note | can be aligned with spacing ≥ 2 mm |
| Mounting position | any |