MUT 6-PE - Mini protective conductor terminal block - 3248040

Detalhes dos produtos

Product type	Miniature terminal block
Number of positions	1
Number of connections	2
Number of rows	1
Insulation characteristics
Overvoltage category	III
Degree of pollution	3

Rated surge voltage	6 kV
Maximum power dissipation for nominal condition	0 W

Number of connections per level	2
Nominal cross section	6 mm²
Rated cross section AWG	10
Screw thread	M3
Note	Please observe the current carrying capacity of the DIN rails.
Tightening torque	0.6 ... 0.8 Nm
Stripping length	8 mm ... 9 mm
Internal cylindrical gage	A5
	B4
Conductor cross section rigid	0.2 mm² ... 10 mm²
Cross section AWG	24 ... 8 (converted acc. to IEC)
Conductor cross section flexible	0.25 mm² ... 6 mm²
Conductor cross section, flexible [AWG]	24 ... 10 (converted acc. to IEC)
Conductor cross-section flexible (ferrule without plastic sleeve)	0.25 mm² ... 6 mm²
Flexible conductor cross section (ferrule with plastic sleeve)	0.25 mm² ... 6 mm²
Nominal cross section	6 mm²

Rated data (ATEX/IECEx)
Identification	 II 2 GD Ex eb IIC Gb
Operating temperature range	-60 °C ... 110 °C
Ex-certified accessories	3248033 D-MUT 2,5/4
	1205053 SZS 0,6X3,5
	3022263 CLIPFIX 15
output	(Permanent)
Ex connection data General
Torque range	0.6 Nm ... 0.8 Nm
Connection capacity rigid	0.2 mm² ... 10 mm²
Connection capacity AWG	24 ... 8
Connection capacity flexible	0.25 mm² ... 6 mm²
Connection capacity AWG	24 ... 10
2 conductors with same cross section, solid	0.2 mm² ... 2.5 mm²
2 conductors with the same cross-section AWG rigid	24 ... 14
2 conductors with same cross section, stranded	0.2 mm² ... 2.5 mm²
2 conductors with the same cross-section AWG flexible	24 ... 14

Width	8.2 mm
End cover width	2.2 mm
Height	29.9 mm
Depth on NS 15	34 mm

Color	green-yellow
Flammability rating according to UL 94	V0
Insulating material group	I
Insulating material	PA
Static insulating material application in cold	-60 °C
Relative insulation material temperature index (Elec., UL 746 B)	130 °C
Fire protection for rail vehicles (DIN EN 45545-2) R22	HL 1 - HL 3
Fire protection for rail vehicles (DIN EN 45545-2) R23	HL 1 - HL 3
Fire protection for rail vehicles (DIN EN 45545-2) R24	HL 1 - HL 3
Fire protection for rail vehicles (DIN EN 45545-2) R26	HL 1 - HL 3
Surface flammability NFPA 130 (ASTM E 162)	passed
Specific optical density of smoke NFPA 130 (ASTM E 662)	passed
Smoke gas toxicity NFPA 130 (SMP 800C)	passed

Mechanical data
Open side panel	Yes

Oscillation/broadband noise
Specification	DIN EN 50155 (VDE 0115-200):2018-05
Spectrum	Long life test category 2, bogie-mounted
Frequency	f₁ = 5 Hz to f₂ = 250 Hz
ASD level	6.12 (m/s²)²/Hz
Acceleration	3.12g
Test duration per axis	5 h
Test directions	X-, Y- and Z-axis
Result	Test passed
Shocks
Specification	DIN EN 50155 (VDE 0115-200):2018-05
Pulse shape	Half-sine
Acceleration	30g
Shock duration	18 ms
Number of shocks per direction	3
Test directions	X-, Y- and Z-axis (pos. and neg.)
Result	Test passed
Ambient conditions
Ambient temperature (operation)	-60 °C ... 110 °C (Operating temperature range incl. self-heating; for max. short-term operating temperature, see RTI Elec.)
Ambient temperature (storage/transport)	-25 °C ... 60 °C (for a short time, not exceeding 24 h, -60 °C to +70 °C)
Ambient temperature (assembly)	-5 °C ... 70 °C
Ambient temperature (actuation)	-5 °C ... 70 °C
Permissible humidity (operation)	20 % ... 90 %
Permissible humidity (storage/transport)	30 % ... 70 %

Mounting type	NS 15

Dados comerciais

N.º de artigo	3248040
Pcs./Emb	50 Unidade
Quantidade mínima de pedido	50 Unidade
Chave comercial	BE1
Chave de produto	BE1161
GTIN	4046356817608
Peso por unidade (inclusive embalagem)	9,747 g
Peso por unidade (excluindo embalagem)	10,38 g
Número do imposto alfandegário	85369010
País de origem	CN

Classificações

Certificações

Approval Specification Data
	Tensão nominal U_N	Corrente nominal I_N	Secção transversal American Wire Gauge	Secção transversal mm²
Use group B
			24 - 8
Use group C
			24 - 8
Use group D
			24 - 8

Approval Specification Data
	Tensão nominal U_N	Corrente nominal I_N	Secção transversal American Wire Gauge	Secção transversal mm²
Use group B
			24 - 8
Use group C
			24 - 8
Use group F
			24 - 8
Use group D
			24 - 8

Approval Specification Data
	Tensão nominal U_N	Corrente nominal I_N	Secção transversal American Wire Gauge	Secção transversal mm²
Only flexible conductors				0.2 - 6
Only rigid conductors				0.2 - 10

Approval Specification Data
	Tensão nominal U_N	Corrente nominal I_N	Secção transversal American Wire Gauge	Secção transversal mm²
Only flexible conductors				0.2 - 6
Only rigid conductors				0.2 - 10

Environmental product compliance

EU RoHS
Cumpre os requisitos de substância segundo a Diretiva RoHS	Sim (Sem regras de exceção)
China RoHS
Environment friendly use period (EFUP)	EFUP-E Nenhuma substância perigosa acima dos valores-limite
EU REACH SVHC
Nota sobre as substâncias candidatas ao REACH (n.º CAS)	Nenhuma substância numa proporção superior a 0,1 % em massa

Automate

Connect

Mark, assemble, and install

Supply, charge, and protect

Switch, Measure and Monitor

MUT 6-PE - Mini protective conductor terminal block

3248040

Detalhes dos produtos

ECLASS

ETIM

UNSPSC

CSA

cULus Recognized

DNV

EAC

ATEX

IECEx

CCC

Produtos compatíveis

Automate

Connect

Mark, assemble, and install

Supply, charge, and protect

Switch, Measure and Monitor

MUT 6-PE - Mini protective conductor terminal block 3248040

Detalhes dos produtos

ECLASS

ETIM

UNSPSC

Produtos compatíveis

D-MUT 2,5/4 - End cover 3248033

UCT-TMF 8 - Marker for terminal blocks 0828748

UCT-TMF 8 CUS - Marker for terminal blocks 0829672

PS-8 - Test plug 3031005

PAI-4 - Test adapter 3030925

NS 15 UNPERF 2000MM VPE 10 - DIN rail, unperforated 1401695

NS 15 PERF 2000MM VPE 10 - DIN rail perforated 1401682

NS 15 AL PERF 2000MM VPE 10 - DIN rail perforated 1401763

NS 15 WH PERF 2000MM-VPE 10 - DIN rail perforated 1204096

ZB 8:UNBEDRUCKT - Zack marker strip 1052002

ZB 8 CUS - Zack marker strip 0825011

UC-TM 8 - Marker for terminal blocks 0818072

UC-TM 8 CUS - Marker for terminal blocks 0824597

UCT-TM 8 - Marker for terminal blocks 0828740

UCT-TM 8 CUS - Marker for terminal blocks 0829616

ZB 8,LGS:FORTL.ZAHLEN - Zack marker strip 1052015

ZB 8,QR:FORTL.ZAHLEN - Zack marker strip 1052028

ZB 8,LGS:L1-N,PE - Marker for terminal blocks 1052413

SZS 1,0X4,0 VDE - Screwdriver 1205066

PROJECT COMPLETE - Software 1050453

MUT 6-PE - Mini protective conductor terminal block

3248040