INTERBUS ST standard bus terminal modules
The INTERBUS bus terminal module connects the input/output modules of an ST station with the INTERBUS network.
Depending on the transmission medium used, the bus terminal modules are equipped with different bus connections. For copper conductors, D-SUB and MINI-COMBICON connectors are available. The fiber optic versions are equipped with F-SMA connectors.
The bus terminal modules are available in two different performance classes. A maximum of 4 or 8 input/output modules can be operated on one bus terminal module.
The bus terminal module takes on the following functions within a modular INTERBUS-ST station:
- Refreshing the INTERBUS remote bus signals
- Electrical isolation of the remote bus segments
- Decoupling of the outgoing remote bus or of the connected input/ output modules from the INTERBUS network with a software command
- Supply of the connected input/output modules with an electrically isolated voltage supply from an integrated power supply unit
IBS ST 24 BKM-T
-
Bus coupler
2750154
INTERBUS-ST bus terminal module, 24 V DC, with 8-pos. MINI-COMBICON plug, IP20 protection, consisting of: Terminal part with screw connection and module electronics
Detalhes dos produtos
| Dimensional drawing |
|
| Width | 44 mm |
| Height | 117 mm |
| Depth | 116 mm |
| Color | green |
| ST local bus | |
| Connection method | ST local bus connector |
| Transmission speed | 500 kbps |
| INTERBUS | |
| Connection method | 8-pos. MINI COMBICON connector |
| Designation connection point | Incoming/Outgoing Remote Bus |
| Number of positions | 8 |
| Fieldbus: Local bus gateway | |
| Max. number of local bus devices | max. 4 |
| Digital: | |
| Connection technology | Screw connection |
| Product type | I/O component |
| Product family | Smart Terminal ST |
| Type | modular |
| INTERBUS Smart Terminal | |
| Mounting position | Horizontal DIN rail |
| Supply: Module electronics | |
| Supply voltage | 24 V DC |
| Supply voltage range | 20 V DC ... 30 V DC (including ripple) |
| Current consumption | typ. 150 mA (without ST module expansions) |
| typ. 350 mA (For maximum number of I/O modules on the ST local bus) | |
| Ripple | 3.6 Vpp within the allowable voltage range |
| Electrical isolation/isolation of the voltage ranges | |
| Test voltage: Incoming remote bus / Outgoing remote bus | 500 V AC, 50 Hz, 1 min |
| Test voltage: Incoming remote bus/ST interface | 500 V AC, 50 Hz, 1 min |
| Connection technology | |
| Connection name | Terminal block |
| Conductor connection | |
| Connection method | MINI COMBICON |
| Conductor cross-section rigid | 0.2 mm² ... 2.5 mm² |
| Conductor cross-section flexible | 0.2 mm² ... 2.5 mm² |
| Conductor cross-section AWG | 24 ... 12 |
| Stripping length | 8 mm |
| Terminal block | |
| Connection method | MINI COMBICON |
| Conductor cross-section, rigid | 0.2 mm² ... 2.5 mm² |
| Conductor cross-section, flexible | 0.2 mm² ... 2.5 mm² |
| Conductor cross-section AWG | 24 ... 12 |
| Stripping length | 8 mm |
| Ambient conditions | |
| Ambient temperature (operation) | 0 °C ... 55 °C |
| Degree of protection | IP20 |
| Air pressure (operation) | 86 kPa ... 108 kPa (up to 1500 m above sea level) |
| Air pressure (storage/transport) | 66 kPa ... 108 kPa (up to 3500 m above sea level) |
| Ambient temperature (storage/transport) | -20 °C ... 70 °C |
| Permissible humidity (operation) | 30 % ... 75 % (non-condensing) |
| Permissible humidity (storage/transport) | 30 % ... 95 % (non-condensing) |
| Protection class | III (IEC 61140, EN 61140, VDE 0140-1) |
| Mounting type | DIN rail mounting |
| Mounting position | Horizontal DIN rail |
Vantagens
Copper or fiber optic connection
Additional I/Os onboard
Additional remote/local bus branches