The INTERBUS master is designed to be aligned to the left of an Axioline F controller. The INTERBUS master can be used to integrate INTERBUS remote bus devices into the Axioline F station.
AXC F XT IB
-
PLC extension module
2403018
PLCnext Control Extension, PLC extension module; Left alignment; INTERBUS master; interface: INTERBUS remote bus: 1; Amount of process data: 4096 bit; Transmission speed: 500 kbps; Transmission speed: 2 Mbps; degree of protection: IP20; Scope of supply: including bus base module and Axioline F connector; Supported controller: AXC F 2152, AXC F 3152
Este produto precisa de outros produtos para a operação.
Acessórios necessários
Transferência gratuita disponível.
Downloads
Detalhes dos produtos
| Dimensional drawing |
|
| Width | 35 mm |
| Height | 126.1 mm |
| Depth | 54 mm |
| Note on dimensions | The depth applies when a TH 35-7.5 DIN rail is used (in accordance with EN 60715). |
| Note on application | |
| Note on application | Only for industrial use |
| Transmission speed | 500 kbps |
| INTERBUS remote bus | |
| Number of interfaces | 1 |
| Connection method | D-SUB-9 female connector |
| Transmission speed | max. 500 kbps (Operating mode 1) |
| max. 2 Mbps (Operating mode 2) | |
| Transmission physics | Copper |
| Transmission length | max. 400 m |
| Supported controller | AXC F 2152 |
| AXC F 3152 | |
| System limits | |
| Amount of process data (INTERBUS input/output data max.) | max. 4096 bit |
| Number of supported devices (INTERBUS) | max. 512 (in total, of which 255 are remote bus devices/bus segments) |
| Number of local bus devices that can be connected | max. 63 (observe current consumption) |
| Number of devices with parameter channel | max. 126 |
| Number of supported branch terminals with remote bus branch | max. 16 |
| Product type | I/O component |
| Product family | PLCnext Control Extension |
| Type | modular |
| Scope of supply | including bus base module and Axioline F connector |
| Diagnostics messages | Bus error in INTERBUS yes |
| Peripheral fault in INTERBUS yes |
| Maximum power dissipation for nominal condition | 2.64 W |
| Potentials: Supply of the logic voltage UL | |
| Supply voltage | 24 V DC |
| Supply voltage range | 19.2 V DC ... 30 V DC (including all tolerances, including ripple) |
| Current draw | max. 185 mA (with IBS OPTOSUB ... FO adapter) |
| typ. 110 mA (without IBS OPTOSUB ... FO adapter) | |
| Protective circuit | Reverse polarity protection; Polarity protection diode |
| Transient protection; Suppressor diode | |
| Connection technology | |
| Connection name | Axioline F connector |
| Axioline F connector | |
| Connection method | Push-in connection |
| Conductor cross-section, rigid | 0.2 mm² ... 1.5 mm² |
| Conductor cross-section, flexible | 0.2 mm² ... 1.5 mm² |
| Conductor cross-section AWG | 24 ... 16 |
| Stripping length | 8 mm |
| Ambient conditions | |
| Ambient temperature (operation) | -25 °C ... 60 °C (up to 2000 m above sea level) |
| -25 °C ... 55 °C (2000 m ... 3000 m above mean sea level) | |
| Degree of protection | IP20 |
| Air pressure (operation) | 70 kPa ... 106 kPa (up to 3000 m above sea level (at an operating temperature of up to 55°C, maximum)) |
| Permissible humidity (operation) | 5 % ... 95 % (non-condensing) |
| Protection class | III (IEC 61140, EN 61140, VDE 0140-1) |
| Corrosive gas test | |
| Identification | ISA S71.04.2013 G3 Harsh Group A, DIN EN 60068-2-60:2016-06 Method 4 |
| Mounting type | DIN rail mounting |
| Possible mounting positions | Left alignment |
Vantagens
Up to 512 INTERBUS remote bus devices can be connected
INTERBUS connection via 9-pos. D-SUB socket
Automatic detection of the transmission speed in INTERBUS (500 kbps or 2 Mbps)
Electrical isolation between INTERBUS interface and logic
Diagnostic and status indicators
Individual extension option for a PLCnext Control from the Axiocontrol series