UDK 4-DIO-Z 2,7V/L-R/P-P
   - 
  Feed-through terminal block
    
      2775281
      
      
    
  
      Single-level terminal block with two-sided double connection and built-in diode, cross section: 0.2 - 2.5 mm2, AWG: 30 - 10, width: 6.2 mm, color: gray
Detalhes dos produtos
| Product type | Component terminal block | 
| Number of connections | 4 | 
| Number of rows | 1 | 
| Potentials | 1 | 
| Insulation characteristics | |
| Overvoltage category | III | 
| Degree of pollution | 3 | 
| Rated surge voltage | 8 kV | 
| Maximum power dissipation for nominal condition | 1.02 W | 
| Number of connections per level | 4 | 
| Nominal cross section | 4 mm² | 
| Connection method | Screw connection | 
| Screw thread | M3 | 
| Tightening torque | 0.5 ... 0.6 Nm | 
| Stripping length | 8 mm | 
| Internal cylindrical gage | A3 | 
| Connection in acc. with standard | IEC 60947-7-1 | 
| Conductor cross-section rigid | 0.2 mm² ... 6 mm² | 
| Cross section AWG | 24 ... 10 (converted acc. to IEC) | 
| Conductor cross-section flexible | 0.2 mm² ... 4 mm² | 
| Conductor cross-section, flexible [AWG] | 24 ... 12 (converted acc. to IEC) | 
| Conductor cross-section flexible (ferrule without plastic sleeve) | 0.25 mm² ... 4 mm² | 
| Flexible conductor cross-section (ferrule with plastic sleeve) | 0.25 mm² ... 1.5 mm² | 
| Cross-section with insertion bridge, rigid | 2.5 mm² | 
| Cross-section with insertion bridge, flexible | 2.5 mm² | 
| 2 conductors with same cross section, solid | 0.2 mm² ... 1 mm² | 
| 2 conductors with same cross section, flexible | 0.2 mm² ... 1.5 mm² | 
| 2 conductors with same cross section, flexible, with ferrule without plastic sleeve | 0.25 mm² ... 1.5 mm² | 
| 2 conductors with the same cross section, flexible, with TWIN ferrule with plastic sleeve | 0.5 mm² ... 1 mm² | 
| Nominal current | 10 mA | 
| Maximum load current | 10 mA (the maximum current is determined by the diode) | 
| Nominal voltage | 10 V | 
| Nominal cross section | 4 mm² | 
| Width | 6.2 mm | 
| End cover width | 1.5 mm | 
| Color | gray (RAL 7042) | 
| Flammability rating according to UL 94 | V2 | 
| Insulating material group | I | 
| Insulating material | PA | 
| Mechanical data | |
| Open side panel | Yes | 
| Ambient conditions | |
| Ambient temperature (storage/transport) | -25 °C ... 60 °C (for a short time, not exceeding 24 h, -60 °C to +70 °C) | 
| Ambient temperature (assembly) | -5 °C ... 70 °C | 
| Ambient temperature (actuation) | -5 °C ... 70 °C | 
| Permissible humidity (storage/transport) | 30 % ... 70 % | 
| Connection in acc. with standard | IEC 60947-7-1 | 
| Mounting type | NS 32 | 
| NS 35/7,5 | |
| NS 35/15 | 
| N.º de artigo | 2775281 | 
| Pcs./Emb | 50 Unidade | 
| Quantidade mínima de pedido | 50 Unidade | 
| Observação | Produção ligada a pedido (sem devolução) | 
| Chave comercial | BE1 | 
| Chave de produto | BE1272 | 
| GTIN | 4017918251802 | 
| Peso por unidade (inclusive embalagem) | 15,28 g | 
| Peso por unidade (excluindo embalagem) | 15,28 g | 
| Número do imposto alfandegário | 85369010 | 
| País de origem | PL | 
ETIM
| ETIM 8.0 | EC000897 | 
UNSPSC
| UNSPSC 21.0 | 39121400 | 
| EU RoHS | |
| Cumpre os requisitos de substância segundo a Diretiva RoHS | Sim | 
| isenções tanto quanto conhecido | 7(c)-I | 
| China RoHS | |
| Environment friendly use period (EFUP) | EFUP-50 Uma lista de declaração de acordo com a RoHS da China relativa a artigos encontra-se na área de transferências do respetivo artigo, em "Declaração do fabricante". Para todos os artigos com EFUP-E não é emitida nem necessária uma tabela de declaração de acordo com a RoHS da China. | 
| EU REACH SVHC | |
| Nota sobre as substâncias candidatas ao REACH (n.º CAS) | Nenhuma substância numa proporção superior a 0,1 % em massa | 
Produtos compatíveis
            Nota: a utilização de alguns acessórios abaixo indicados pode impôr restrições ao produto.
          
          
        - 
    
      
- 
    
      ISSBI 10- 6 - Bridge 0301505
- 
    
      LB 10-6 BU - Bridge 0202280
- 
    
      LB 10-6 RD - Bridge 0202293
- 
    
      LB 10-6 GY - Bridge 0202358
- 
    
      LB 100-6 GY - Bridge 0202345
- 
    
      LB 100-6 RD - Bridge 0202316
- 
    
      LB 100-6 BU - Bridge 0202303
- 
    
      FBI 100- 6 - Fixed bridge 0201650
- 
    
      FBI 10- 6 - Fixed bridge 0203250
- 
    
      FBI 20- 6 - Fixed bridge 0201867
- 
    
      EB 3- 6 - Insertion bridge 0201142
- 
    
      EB 2- 6 - Insertion bridge 0201155
- 
    
      EB 10- 6 - Insertion bridge 0201139
- 
    
      SBRN 2-7 - Bridge bar 1413230
- 
    
      USBR 2-7 - Bridge bar 2303239
- 
    
      USBRJ 2-7 - Bridge bar 2305538
- 
    
      D-UDK 4 - End cover 2775113
- 
    
      WS 3- 6 - Warning label 1004115
- 
    
      WS 5- 6 - Warning label 1004403
- 
    
      WS 4- 6 - Warning label 1004209
- 
    
      FB-150 METER - Fixed bridge 0201595
- 
    
      KSS 3- 6 - Short-circuit connector 0309523
- 
    
      KSS 6 - Short-circuit connector 0301547
- 
    
      RPS - Reducing plug 0201647
- 
    
      TS-KK 3 - Separating plate 2770215
- 
    
      SBS 6:UNBEDRUCKT - Marker card 1007222
- 
    
      NS 32 PERF 2000MM-VPE 10 - DIN rail perforated 1201002
- 
    
      NS 32 UNPERF 2000MM-VPE 10 - DIN rail, unperforated 1201015
- 
    
      NS 35/ 7,5 PERF 2000MM - DIN rail perforated 0801733
- 
    
      NS 35/ 7,5 UNPERF 2000MM - DIN rail, unperforated 0801681
- 
    
      NS 35/ 7,5 WH PERF 2000MM - DIN rail perforated 1204119
- 
    
      NS 35/ 7,5 WH UNPERF 2000MM-VPE 10 - DIN rail, unperforated 1204122
- 
    
      NS 35/ 7,5 AL UNPERF 2000MM - DIN rail, unperforated 0801704
- 
    
      NS 35/ 7,5 ZN PERF 2000MM - DIN rail perforated 1206421
- 
    
      NS 35/ 7,5 ZN UNPERF 2000MM - DIN rail, unperforated 1206434
- 
    
      NS 35/ 7,5 CU UNPERF 2000MM-VPE 10 - DIN rail, unperforated 0801762
- 
    
      NS 35/ 7,5 CAP - End cap 1206560
- 
    
      NS 35/15 PERF 2000MM - DIN rail perforated 1201730
- 
    
      NS 35/15 UNPERF 2000MM - DIN rail, unperforated 1201714
- 
    
      NS 35/15 WH PERF 2000MM - DIN rail perforated 0806602
- 
    
      NS 35/15 WH UNPERF 2000MM-VPE 10 - DIN rail, unperforated 1204135
- 
    
      NS 35/15 AL UNPERF 2000MM - DIN rail, unperforated 1201756
- 
    
      NS 35/15 ZN PERF 2000MM - DIN rail perforated 1206599
- 
    
      NS 35/15 ZN UNPERF 2000MM - DIN rail, unperforated 1206586
- 
    
      NS 35/15 CU UNPERF 2000MM-VPE 10 - DIN rail, unperforated 1201895
- 
    
      NS 35/15 CAP - End cap 1206573
- 
    
      NS 35/15-2,3 UNPERF 2000MM-VPE 10 - DIN rail, unperforated 1201798
- 
    
      ZB 6:UNBEDRUCKT - Zack marker strip 1051003
- 
    
      ZB 6 CUS - Zack marker strip 0824992
- 
    
      ZB 6,LGS:FORTL.ZAHLEN - Zack marker strip 1051016
- 
    
      ZB 6,QR:FORTL.ZAHLEN - Zack marker strip 1051029
- 
    
      ZB 6,LGS:GLEICHE ZAHLEN - Zack marker strip 1051032
- 
    
      ZB 6,LGS:L1-N,PE - Marker for terminal blocks 1051414
- 
    
      ZB 6,LGS:U-N - Marker for terminal blocks 1051430
- 
    
      UC-TM 6 - Marker for terminal blocks 0818085
- 
    
      UC-TM 6 CUS - Marker for terminal blocks 0824589
- 
    
      UCT-TM 6 - Marker for terminal blocks 0828736
- 
    
      UCT-TM 6 CUS - Marker for terminal blocks 0829602
- 
    
      CLIPFIX 35 - End bracket 3022218
- 
    
      CLIPFIX 35-5 - End bracket 3022276
- 
    
      E/NS 35 N - End bracket 0800886
- 
    
      PSBJ 3/13/4 - Test plug strip 0201304
- 
    
      PSB 3/10/4 - Test plug strip 0601292
- 
    
      E/UK - End bracket 1201442
- 
    
      E/UK 1 - End bracket 1201413
Vantagens
Two connection points on each side to accommodate several conductors
        Double bridge shaft enables individual potential distribution and supply
        Phoenix Contact S.A.
        
        Sintra Business Park, Edifício n°1 Zona Industrial da Abrunheira, sala 0M, 2710-089 SINTRA