Adds Ethernet connectivity (Modbus TCP Server functionality) to Nanoline controller. Attaches to left-side of base unit.
NLC-COM-ENET-MB1
-
Communication module
2701124
Ethernet communication module. Allows the Nanoline controller to be connected to an Ethernet, operating as a Modbus TCP Server.
Detalhes dos produtos
| Notes on operation | Program configuration requires a serial connection. It cannot be done via the Ethernet module. |
| Product type | Communication module |
| Product family | Nanoline |
| Supply | |
| Supply voltage | 24 V DC (Power available via logic module) |
| Power supply connection | Screw connection |
| Max. current consumption | 180 mA (at 18 V DC) |
| Typical current consumption | 110 mA |
| Extension module | |
| Connection method | Installs left side of base unit |
| Ethernet 10/100Base T | |
| Connection method | RJ45 |
| Transmission speed | 10/100 Mbps (auto negotiation) |
| Transmission length | 100 m |
| Signal LEDs | LNK/ACT; Module; Network |
| Dimensional drawing |
|
| Width | 40 mm |
| Height | 103.5 mm |
| Depth | 43 mm |
| Ambient conditions | |
| Degree of protection | IP20 |
| Ambient temperature (operation) | -25 °C ... 60 °C |
| Ambient temperature (storage/transport) | -25 °C ... 85 °C |
| Permissible humidity (operation) | 90 % |
cUL Listed
ID de certificação: E238705Produtos compatíveis
Vantagens
Enables all I/O points, registers, timers, counters, program flags, and system flags to be read and written remotely
Password control can limit access: read-only or read/write
Watchdog timer monitors communication, providing either a warning or fault
Connects to an Ethernet network to function as a Modbus TCP client