CHARX SEC-3100
-
AC charging controller
1139012
CHARX control modular, AC charging controller, with Embedded Linux system, IEC 61851-1, operating mode: Stand-Alone, Client, Server, interface: Ethernet (2x), Cellular communication (4G/2G), CHARX control modular system bus, MICRO-USB type C, communication protocol: OCPP 1.6J, Modbus/TCP, MQTT, Connectable peripheral devices: Energy meter, RFID, DC residual current detection, DIN rail mounting
Transferência gratuita disponível.
Downloads
Detalhes dos produtos
Product type | AC charging controller |
Product family | CHARX control modular |
Design | with Embedded Linux system |
Operating mode | Stand-Alone |
Client | |
Server | |
Charging standard | IEC 61851-1 |
Charging mode | Mode 3, Case B + C |
Insulation characteristics | |
Overvoltage category | III |
IEC 61131 runtime system | |
Data storage system | 8 GByte (eMMC) |
Supply | |
Supply voltage | 12 V DC ±5 % |
Supply voltage range | 11.4 V DC ... 12.6 V DC |
Max. current consumption | 2 A (Stand-alone operation) |
Digital | |
Number of digital inputs | 4 |
Description of the input | Digital input |
Nominal input voltage UN | 12 V |
Input voltage range U1 | 0 V ... 3 V (Off) |
Input voltage range U2 | 9 V ... 15 V (On) |
Digital | |
Output name | Digital output |
Number outputs | 4 |
Maximum output voltage | ≤ 12 V (Low-side operation) |
Maximum output current | max. 600 mA |
Conductor connection | |
Connection method | pluggable |
Push-in technology | |
Conductor cross section rigid | 0.14 mm² ... 1.5 mm² |
Conductor cross section flexible | 0.2 mm² ... 2.5 mm² |
Conductor cross section AWG | 24 ... 16 |
Interface | Ethernet (2x) |
Cellular communication (4G/2G) | |
CHARX control modular system bus | |
USB-C | |
Wireless | |
Interface description | GSM / GPRS / EDGE / LTE (FDD) |
Note | You will find a suitable antenna in the accessories are for this item |
Frequency | 700 MHz (LTE B28, hardware revision 1.4 or later) |
800 MHz (LTE B20) | |
900 MHz (LTE B8) | |
1800 MHz (LTE B3) | |
2100 MHz (LTE B1, hardware revision 1.4 or later) | |
2600 MHz (LTE B7, hardware revision 1.4 or later) | |
900 MHz (GSM/GPRS/EDGE ) | |
1800 MHz (GSM/GPRS/EDGE ) | |
Antenna | 50 Ω impedance SMA antenna socket |
SIM Interface | Micro SIM (3FF) |
LTE | CAT1 |
Protocols supported | OCPP 1.6J |
Ethernet | |
Interface | Ethernet |
Connection method | RJ45 jack |
Number of interfaces | 2 |
Number of supported devices | 2 |
Serial transmission speed | 10/100 Mbps |
Transmission length | 100 m |
Protocols supported | OCPP 1.6J |
Modbus/TCP | |
MQTT | |
HTTP | |
HTTPS | |
Others | |
Interface | Configuration and diagnostics |
Connection method | USB type C |
Number of interfaces | 1 |
Protocols supported | RNDIS |
Interface | Energy meter |
Bus system | RS-485 |
Transmission speed range | 9.6 kbps ... 115.2 kbps (Automatic setting in accordance with the selected energy meter) |
Interface | RFID readers |
Bus system | RS-485 |
Transmission speed range | 9.6 kbps ... 115.2 kbps (Automatic setting in accordance with the selected RFID reader) |
Others | |
Interface | CHARX control modular system bus |
Connection method | DIN rail bus connector |
Number of interfaces | 1 |
Ambient conditions | |
Degree of protection | IP20 |
Ambient temperature (operation) | -25 °C ... 65 °C |
Ambient temperature (storage/transport) | -40 °C ... 80 °C |
Permissible humidity (operation) | 5 % ... 95 % (non-condensing) |
Permissible humidity (storage/transport) | 5 % ... 95 % (non-condensing) |
Air pressure (operation) | 70 kPa ... 106 kPa (up to 3000 m above mean sea level) |
Air pressure (storage/transport) | 58 kPa ... 106 kPa (up to 4500 m above mean sea level) |
Conformity/Approvals | |
Conformance | CE-compliant |
Standards | |
Standards/regulations | IEC 61851-1 |
Mounting type | DIN rail mounting |
Assembly note | DIN rail mounting |
Mounting position | any |
N.º de artigo | 1139012 |
Pcs./Emb | 1 Unidade |
Quantidade mínima de pedido | 1 Unidade |
Chave comercial | XWB |
Chave de produto | XWBBFC |
GTIN | 4063151080181 |
Peso por unidade (inclusive embalagem) | 264 g |
Peso por unidade (excluindo embalagem) | 255 g |
Número do imposto alfandegário | 85371091 |
País de origem | DE |
ECLASS
ECLASS-13.0 | 27144703 |
ETIM
ETIM 9.0 | EC002889 |
UNSPSC
UNSPSC 21.0 | 39121800 |
EU RoHS | |
Cumpre os requisitos de substância segundo a Diretiva RoHS | Sim |
isenções tanto quanto conhecido | 7(a), 7(c)-I |
China RoHS | |
Environment friendly use period (EFUP) |
EFUP-10
Uma lista de declaração de acordo com a RoHS da China relativa a artigos encontra-se na área de transferências do respetivo artigo, em "Declaração do fabricante". Para todos os artigos com EFUP-E não é emitida nem necessária uma tabela de declaração de acordo com a RoHS da China.
|
EU REACH SVHC | |
Nota sobre as substâncias candidatas ao REACH (n.º CAS) | Lead (n.º CAS: 7439-92-1) |
SCIP | 29cc0dbf-63f3-4588-8ae5-6fa84c1a3237 |
Produtos compatíveis
-
-
EV-RCM-6DC-WAT-X10 - Differential current monitoring 1309695
-
EV-RFID-ELT-PCB - RFID device 1309772
-
EV-RFID-ELT-PCB-X10 - RFID device 1309752
-
EV-RFID-ELT-IP65 - RFID device 1309687
-
TC ANT MOBILE WALL 5M - Antenna 2702273
-
CHARX SEC JST-RCM-CBL - Cable set 1360462
-
ISKRA WM3M4C ENERGYMETER - Measuring device 1429603
-
CHARX 4,3 LCD DISPLAY - Display 1426836
-
EV-T2M3SO12-3P-P-SET - Infrastructure charging socket 1164422
-
EV-T2M3SO12-4P-P-SET - Infrastructure charging socket 1164423
-
EV-T2M3SO12-3P-BL-SET - Infrastructure charging socket 1268358
-
EV-T2M3SO12-4P-BL-SET - Infrastructure charging socket 1268355
-
EV-T2M3SO12-3P-B-SET - Infrastructure charging socket 1164420
-
EV-T2M3SO12-4P-B-SET - Infrastructure charging socket 1164417
-
CHARX RFID/NFC-PCB - RFID/NFC device 1391227
-
CHARX RFID/NFC-PCB-X10 - RFID/NFC device 1399372
-
CHARX SEC JST-RCM-CBL 100 - Cable set 1486193
Pesquisado com frequência
Phoenix Contact S.A.
Sintra Business Park, Edifício n°1 Zona Industrial da Abrunheira, sala 0M, 2710-089 SINTRA