APP-LIC-WATER-FUNCTIONS-VISU
-
Licence
1270956
Licence pour l'utilisation de la bibliothèque Water Functions Visu. Water Functions Visu permet en plus de la bibliothèque des blocs de fonction Water Functions, la fonction Remote et les objets de visualisation pour l'industrie des eaux et des eaux usées.
Téléchargement gratuit disponible.
Téléchargements
Informations détaillées concernant le produit
Questions fréquemment posées
Existe-t-il un tutoriel du matériel qui explique les fonctions de CAPAROC ?
Oui, il existe un tutoriel concernant le matériel pour faciliter la prise en main de CAPAROC.... Voir plus
Oui, il existe un tutoriel concernant le matériel pour faciliter la prise en main de CAPAROC.
Voir moinsHow many circuit breaker modules can I connect downstream of an infeed module?
CAPAROC PM S-R: 20 circuit breaker modules
CAPAROC PM IOL: 20 channels
CAPAROC PM PN: 16 circuit breaker modules
CAPAROC PM EIP: 16 circuit breaker modules
CAPAROC PM MB: 16 circuit breaker modules
CAPAROC PM EC: 16 circuit breaker modules
The channel LED flashes yellow twice every 4 seconds. What does this mean?
This means that the internal communication to the power module is interrupted or faulty.
Check that the modules are mounted correctly and that there is no gap between the modules. If communication is still disrupted, check the side contacts of the...
Voir plus
This means that the internal communication to the power module is interrupted or faulty.
Check that the modules are mounted correctly and that there is no gap between the modules. If communication is still disrupted, check the side contacts of the first module (left) that is flashing, if they are bent, either too far into the module, not centered in the housing opening or otherwise damaged, replace the module.
Can I block the setting of the set currents?
The currents can be locked in different ways:
1. Programming lock: press the PWR button on the power module for > 3 seconds, the PWR LED flashes yellow 3 x, the settings are now locked. Pressing it again for > 3 seconds causes the LED to fla...
Voir plus
The currents can be locked in different ways:
1. Programming lock: press the PWR button on the power module for > 3 seconds, the PWR LED flashes yellow 3 x, the settings are now locked. Pressing it again for > 3 seconds causes the LED to flash green 3 times and unlocks it again.
2. The lock can also be set and released via the communication interface; the operating lock can also be set here, which prevents operation and settings on the device. The lock can then only be released via the interface.