HC-COM-BAWS-EL-AL
-
Housing
1078593
Panel mounting base COM, with single locking latch, material: Die-cast aluminum, salt water resistant, height: 37.5 mm, cable gland: none, Standard
Product details
| Product type | Housing with locking latch |
| Housing type | Panel mounting base |
| Product family | HC-COM |
| Application | Standard |
| Type | COM |
| Pg screw connection | none |
| Dimensional drawing |
|
| Width | 49.5 mm |
| Height | 37.5 mm |
| Length | 63.5 mm |
| Hole diameter | 3.5 mm |
| Installation dimensions | |
| Width of the assembly cutout | 24.5 mm |
| Length of the assembly cutout | 27 mm |
| Flammability rating according to UL 94 | V0 (Interlock) |
| Seal material Flat gasket | NBR, conductive |
| Housing material | Die-cast aluminum, salt water resistant |
| Locking latch material | PA |
| Mechanical data | |
| Locking type | Latch |
| Tightening torque | 0.8 Nm ... 1.2 Nm (for M4 mounting screws on the surface-mount housing) |
| Ambient conditions | |
| Degree of protection | IP66 |
| Impact strength | IK06 |
| Ambient temperature (operation) | -40 °C ... 125 °C |
Your advantages
Good shielding in the event of electromagnetic interference
Frequently asked questions
Why do these HEAVYCON connector housings not have a powder coating?
The uncoated aluminum housings from the HEAVYCON portfolio are suitable for both standard and EMC applications. Thanks to their conductive seals and surfaces, they are “EMC ready” and offer excellent shielding properties in combination with an EMC ca... View more
The uncoated aluminum housings from the HEAVYCON portfolio are suitable for both standard and EMC applications. Thanks to their conductive seals and surfaces, they are “EMC ready” and offer excellent shielding properties in combination with an EMC cable gland. This makes them particularly suitable for electromagnetically demanding environments.
View less