The content you are viewing is tailored for Global. View Content for United States | Choose Another Country

SACC-CIP-M12FS-4P SMD-SP - Sample set

1418548

Sample set, 4-position, Socket, straight, M12, A-coding, SMD reflow

Product details

Notes on operation	The electrical and mechanical data specified assume that the connector pair is correctly locked and mounted. If the connector is unlocked and if there is a danger of contamination, the connector must be sealed using a protective cap > IP54. Influences arising from litz wires, cables or PCB assembly must also be taken into consideration.

Product type	Contact insert
Number of positions	4
Seal present	yes
Coding	A
Thread type	M12
Insulation characteristics
Overvoltage category	II
Degree of pollution	3

Rated surge voltage	2.5 kV
Contact resistance	≤ 3 mΩ
Insulation resistance	≥ 100 MΩ
Nominal voltage U_N	250 V
Nominal current I_N	4 A

Connection method	SMD reflow

Flammability rating according to UL 94	V0
Seal material	FKM
Contact material	CuZn
Contact surface material	Au
Contact carrier material	PA

Connection 1
Head design	Socket
Head cable outlet	straight
Head thread type	M12
Coding	A

Mechanical data
Insertion/withdrawal cycles	> 100

Ambient conditions
Degree of protection (not plugged in)	IP65 (not plugged in, by means of additional O-ring seal with device)
Degree of protection	IP67 (correctly plugged in and locked)
	IP65 (not plugged in, by means of additional O-ring seal with device)
Ambient temperature (operation) (male connector/female connector)	-25 °C ... 105 °C (Plug / socket)
	-40 °C ... 105 °C (without mechanical actuation)
UL Type Rating	Type 4 (indoor use only)

Standard designation	M12 circular connector
Standards/specifications	according to IEC 61076-2-101

Commercial data

Item number	1418548
Packing unit	5 pc
Minimum order quantity	5 pc
Product key	ABQXAA
GTIN	4055626161020
Weight per piece (including packing)	6.99 g
Weight per piece (excluding packing)	2.612 g
Customs tariff number	85366990
Country of origin	DE

Classifications

Approvals

Approval Specification Data
	Nominal voltage U_N	Nominal current I_N	Cross section AWG	Cross section mm²
keine
	250 V	4 A

Environmental product compliance

Compatible products

Accessories

ECLASS-13.0	27440223
ECLASS-15.0	27440223

EU RoHS
Fulfills EU RoHS substance requirements	Yes
Exemption	6(c)
China RoHS
Environment friendly use period (EFUP)	EFUP-50 An article-related China RoHS declaration table can be found in the download area for the respective article under "Manufacturer declaration". For all articles with EFUP-E, no China RoHS declaration table issued and required.
EU REACH SVHC
REACH candidate substance (CAS No.)	Lead (CAS: 7439-92-1)
SCIP	dd5e3b89-981c-4b4d-801b-9669a14b84e9

Automate

Connect

Mark, assemble, and install

Supply, charge, and protect

Switch, Measure and Monitor

SACC-CIP-M12FS-4P SMD-SP - Sample set

1418548

Product details

ECLASS

ETIM

UNSPSC

cULus Recognized

Compatible products

Automate

Connect

Mark, assemble, and install

Supply, charge, and protect

Switch, Measure and Monitor

SACC-CIP-M12FS-4P SMD-SP - Sample set 1418548

Product details

ECLASS

ETIM

UNSPSC

Compatible products

SACC-BP-F-M12/M15-6-SMD - Housing screw connection 1414021

SACC-BP-F-M12/M15-6-SMD SCO - Housing screw connection 1414023

SACC-FP-F-M12/M14 SMD - Housing screw connection 1412079

SACC-FP-F-M12/PRESS SMD - Housing screw connection 1412081

SACC-BP-F-M12/SMD-0,9/1,6-9TIP - Housing screw connection 1419569

SACC-BP-F-M12/SMD-1,6/2,3-9TIP - Housing screw connection 1419570

SACC-BP-F-M12/SMD-2,3/3,0-9TIP - Housing screw connection 1419571

SACC-BP-F-FIX/NUT-BK-SMD - Fixing sleeve 1419568

SACC-BP-F-FIX/NUT-CY-SMD - Fixing sleeve 1419565

SACC-BP-F-FIX/NUT-GN-SMD - Fixing sleeve 1419566

SACC-BP-F-FIX/NUT-VT-SMD - Fixing sleeve 1419567

SACC-CIP-M12FS-4P SMD-SP - Sample set

1418548