PSR-MM35-1NO-1DO-24DC-SC
-
Safety relay module
1249515
Safety relay module for sensor-free speed and speed range monitoring up to SIL 3, Cat. 4, PL e, 2-channel evaluation of the rotating field of AC and three-phase motors, plug-in screw terminal block, width: 12.5 mm
Free download available.
Downloads
Product details
Note on application | |
Note on application | Only for industrial use |
Product type | Safety device |
Application | Over-speed safety relay |
Control | 2-channel |
Relay type | Electromechanical relay with force-guided contacts in accordance with IEC/EN 61810-3 |
Insulation characteristics | |
Overvoltage category | II (600 V) |
III (300 V) | |
III | |
Degree of pollution | 2 |
Times | |
Typical response time | 70 ms (For Us autostart) |
70 ms (For Us manual, monitored start) | |
Delay time range | 0 s ... 2 s ±10 % (Switch-off delay) |
0 s ... 10 s ±10 % (Switch-on delay) | |
Restart time | < 5 s (Boot time) |
Start pulse length | ≤ 2 s (manual start) |
≥ 200 ms (manual start) |
Maximum power dissipation for nominal condition | 3 W (At US = 26.4 V, IL² = 6 A²) |
Nominal operating mode | 100% operating factor |
Interfaces | Without sensor |
Rated insulation voltage | 300 V (ÜKAT III) |
600 V (ÜKAT II) | |
Rated surge voltage/insulation | Basic insulation 4 kV between all current paths and housing |
Safe isolation, reinforced insulation 6 kV: between 13/14 and A1/A2, S34, MO |
|
Safe isolation, reinforced insulation 8 kV: between L1/L2/L3 and A1, A2, S34, MO between L1/L2/L3 and 13/14 |
|
Supply | |
Designation | A1/A2 |
Rated control circuit supply voltage US | 20.4 V DC ... 26.4 V DC |
Rated control circuit supply voltage US | 24 V DC -15 % / +10 % (provide external protection) |
Rated control supply current IS | 46 mA |
Power consumption at US | 1.1 W |
Filter time | 20 ms (in the event of voltage dips at Us) |
Protective circuit | Surge protection; Suppressor diode |
Protection | 1 A (slow-blow) |
Digital: Digital input | |
Description of the input | IEC 61131-2 type 1 |
Number of inputs | 1 (Non-safety-related parameterizable acknowledgment input: S34) |
Input voltage range "0" signal | 0 V DC ... 5 V DC |
Input voltage range "1" signal | 15 V DC ... 30 V DC |
Input current range "0" signal | 0 mA ... 0.5 mA |
Filter time | 20 ms (Test pulse width of low test pulses) |
Max. permissible overall conductor resistance | 500 Ω (Input and reset circuit at US) |
Protective circuit | 33 V suppressor diode |
Current consumption | typ. 3 mA (at 24 V) |
Measurement | |
Input name | Sensor inputs |
Number of inputs | 3 (Safety-related sensor inputs: L1 , L2 , L3) |
Input voltage range "1" signal | 90 V AC ... 690 V AC |
Precision | ± 1 % |
Limit frequency | min. 0.5 Hz |
max. 1200 Hz | |
Current consumption | 0.35 mA |
Relay: Enabling current path | |
Output description | 2 N/O contacts in series, floating |
Number of outputs | 1 (safety-related N/O contacts: 13/14) |
Contact switching type | 1 enabling current path |
Contact material | AgSnO2 |
Switching voltage | min. 12 V AC/DC |
max. 250 V AC/DC | |
Switching capacity | min. 60 mW |
Inrush current | min. 3 mA |
max. 6 A | |
Limiting continuous current | 6 A |
Sq. Total current | 36 A2 (observe derating) |
Switching frequency | max. 0.1 Hz |
Mechanical service life | 10x 106 cycles |
Output fuse | 6 A gL/gG |
Signal | |
Output description | PNP |
Number of outputs | 1 (Non-safety-related signal output: MO) |
Voltage | 23 V DC (US - 1 V) |
Current | max. 100 mA |
Maximum inrush current | 500 mA |
Ohmic load | min. 240 Ω |
Switching frequency | 0.5 Hz (ohmic) |
Protective circuit | Reverse polarity protection 33 V suppressor diode |
Short-circuit protection | Yes |
Discharging circuit | Yes, internal |
Connection technology | |
pluggable | yes |
Conductor connection | |
Connection method | Screw connection |
Conductor cross section rigid | 0.2 mm² ... 2.5 mm² |
Conductor cross section flexible | 0.2 mm² ... 2.5 mm² |
Conductor cross-section AWG | 24 ... 12 |
Stripping length | 7 mm |
Screw thread | M3 |
Tightening torque | 0.5 Nm ... 0.6 Nm |
Status display | 1 x green, red LED (OUT) |
Operating voltage display | 1 x green, red LED (PWR) |
Error indication | Red LED, (flashes in the event of short-circuits or overload) |
Width | 12.5 mm |
Height | 112.2 mm |
Depth | 114.5 mm |
Color (Housing) | yellow (RAL 1018) |
Housing material | PA |
Safety data | |
Stop category | 0 |
Safety data: EN ISO 13849 | |
Category | 4 |
Performance level (PL) | e |
Safety data: IEC 61508 - High demand | |
Safety Integrity Level (SIL) | 3 |
Safety data | |
Safety Integrity Level (SIL) | 3 |
Safety data: EN IEC 62061 | |
Safety Integrity Level (SIL) | 3 |
Ambient conditions | |
Degree of protection | IP20 |
Min. degree of protection of inst. location | IP54 |
Ambient temperature (operation) | -20 °C ... 55 °C (observe derating) |
Ambient temperature (storage/transport) | -40 °C ... 85 °C |
Maximum altitude | ≤ 2000 m (Above sea level) |
Max. permissible humidity (storage/transport) | 75 % (on average, 85% infrequently, non-condensing) |
Max. permissible relative humidity (operation) | 75 % (on average, 85% infrequently, non-condensing) |
Shock | 15g |
Vibration (operation) | 10 Hz ... 150 Hz, 2g |
CE | |
Certificate | CE-compliant |
Mounting type | DIN rail mounting |
Assembly note | See derating curve |
Mounting position | vertical or horizontal |
Item number | 1249515 |
Packing unit | 1 pc |
Minimum order quantity | 1 pc |
Product key | DNA242 |
GTIN | 4063151353643 |
Weight per piece (including packing) | 156.2 g |
Weight per piece (excluding packing) | 148 g |
Customs tariff number | 90328900 |
Country of origin | DE |
ECLASS
ECLASS-13.0 | 27371811 |
ETIM
ETIM 9.0 | EC001448 |
UNSPSC
UNSPSC 21.0 | 39122300 |
EU RoHS | |
Fulfills EU RoHS substance requirements | Yes |
Exemption | 7(a), 7(c)-I |
China RoHS | |
Environment friendly use period (EFUP) |
EFUP-50
An article-related China RoHS declaration table can be found in the download area for the respective article under "Manufacturer declaration". For all articles with EFUP-E, no China RoHS declaration table issued and required.
|
EU REACH SVHC | |
REACH candidate substance (CAS No.) | Lead titanium zirconium oxide (CAS: 12626-81-2) |
Lead (CAS: 7439-92-1) | |
SCIP | 1c579db6-00b8-464d-a7a6-8b4852aabe92 |
Compatible products
Your advantages
Safe motion monitoring based on sensor-free rotating field measurement of the drive
Maximum system availability, robust measuring procedure in the face of interference factors such as shock, vibration, and EMI
Integrated safety functions: SLS (Safe Limited Speed), SSM (Safe Speed Monitor), SSR (Safe Speed Range)
Easy parameterization and online monitoring with the PSRmotion software, which can be downloaded free of charge
1 enabling current path, 1 parameterizable digital signal output
Up to Cat. 4/PL e in accordance with EN ISO 13849-1, SIL 3 in accordance with EN IEC 62061
Phoenix Contact GmbH & Co. KG
Flachsmarktstraße 8, D-32825 Blomberg