The intelligent Lumgate luminaire control unit is used to couple a light management system to tunnel luminaires. The luminaires are switched, dimmed, and monitored via analog interface and load relays. Suitable for installation in driver boxes or directly in the luminaire.
LUMGATE 277 2DI/2DOR/1AO
-
Luminaire control unit
2400328
Luminaire control unit for controlling LED drivers, 110 V ... 277 V input voltage, 2 relay outputs, 8 A load current, up to 8 LED drivers can be controlled, 10 V analog interface, measurement of load currents
Product details
| Note on application | |
| Note on application | Only for industrial use |
| Utilization restriction | |
| EMC note | EMC: class A product, see manufacturer's declaration in the download area |
| Product type | Gateways/Proxies |
| Product family | Stand-alone |
| Type | Stand-alone |
| Diagnostics messages | Bus error in INTERBUS |
| Insulation characteristics | |
| Overvoltage category | II |
| Pollution degree | 2 |
| Module | |
| ID code (dec.) | 51 |
| ID code (hex) | 33 |
| Input address area | 16 bit |
| Output address area | 16 bit |
| Maximum power dissipation for nominal condition | max. 2216 W |
| Supply: Module electronics | |
| Connection technology | Spring-cage connection |
| Supply voltage | max. 250 V AC (Class II / EN 61347) |
| Supply voltage range | 110 V AC ... 277 V AC -13 % ... +6 % (Following consultation with the manufacturer, Class I/UL 508) |
| Current consumption | max. 8 A (with active consumers) |
| Power consumption | 2 W (No-load) |
| Digital: | |
| Input name | Digital inputs |
| Number of inputs | 2 (Open Collector) |
| Connection method | Header for PTSM connectors |
| Analog: | |
| Output name | Analog output |
| Connection method | Header for PTSM connectors |
| Number of outputs | 1 |
| D/A converter resolution | 8 bit |
| Current output signal | -20 mA (Current sink) |
| Permissible cable length | max. 0.5 m |
| Digital: | |
| Output name | Relay output |
| Connection method | Spring-cage connection |
| Number of outputs | 2 (AC General Use) |
| Protective circuit | Surge protection |
| Output voltage | 250 V AC (TRIAC protection of the N/C contact, load-free switching) |
| Output current | max. 8 A (max. 5 A per relay) |
| Nominal output voltage | max. 277 V AC (50 Hz ... 60 Hz) |
| Supply | |
| Connection method | Spring-cage connection |
| Note on the connection method | Use copper wire, that is approved up to 80 °C. |
| Conductor cross-section, rigid | 0.14 mm² ... 2.5 mm² |
| Conductor cross-section, flexible | 0.14 mm² ... 2.5 mm² |
| Conductor cross-section AWG | 26 ... 14 |
| Stripping length | 8 mm |
| Input/output | |
| Connection method | PTSM connector |
| Note on the connection method | Use copper wire, that is approved up to 80 °C. |
| Conductor cross-section, rigid | 0.14 mm² ... 0.5 mm² |
| Conductor cross-section, flexible | 0.14 mm² ... 0.5 mm² |
| Conductor cross-section AWG | 24 ... 20 |
| Stripping length | 6 mm |
| Remote bus | |
| Transmission speed | 500 kBaud |
| Diagnostic messages | |
| Diagnostics | Bus error in INTERBUS |
| Dimensional drawing |
|
| Width | 110.9 mm |
| Height | 57.9 mm |
| Depth | 39 mm |
| Color | black (RAL 9005) |
| Material | ABS |
| Ambient conditions | |
| Ambient temperature (operation) | -40 °C ... 65 °C |
| Degree of protection | IP20 (touch-proof (per manufacturer's declaration)) |
| Air pressure (operation) | 70 kPa ... 106 kPa (up to 3000 m above sea level) |
| Air pressure (storage/transport) | 70 hPa ... 106 kPa (up to 3000 m above sea level) |
| Ambient temperature (storage/transport) | -40 °C ... 80 °C |
| Permissible humidity (operation) | 5 % ... 90 % (according to DIN EN 61131-2) |
| 5 % ... 95 % (up to 45°C in accordance with EN 60068-2-78:2013) | |
| Permissible humidity (storage/transport) | 5 % ... 90 % (according to DIN EN 61131-2) |
| Mounting type | Mounting on a surface (Mounting in the control box) |
cULus Listed
Approval ID: E238705
Your advantages
Compact housing
AC power supply