The Axioline E IO-Link/analog converter is an IO-Link device that transfers analog signals from thermocouples (TCs) via the IO-Link protocol. The device offers you the option of using an IO-Link master to record the analog signals of conventional type K/J thermocouples (TC). It supports type K/J thermocouples in accordance with DIN EN 60584-1. The measured values are depicted in standardized representation format. The device is connected to an IO-Link master via an IO-Link A port. Use within different networks is possible via the IO-Link master.
AXL E IOL TC4/K M12
-
Analog module
2702983
Axioline E IO-Link/analog converter with 4 analog TC inputs (type K/J), 2-conductor connection technology, 1 IO-Link A port, 24 V DC, IP65 degree of protection
Free download available.
Downloads
Product details
| Note on application | |
| Note on application | Only for industrial use |
| Utilization restriction | |
| EMC note | EMC: class A product, see manufacturer's declaration in the download area |
| Product type | Interface converter |
| Product family | Axioline E |
| Type | Stand-alone |
| Special properties | Plastic housing |
| Insulation characteristics | |
| Pollution degree | 2 (EN 60664-1) |
| Supply: IO-Link | |
| Designation | IO-Link port supply (L+) |
| Nominal voltage for I/O supply | 24 V DC (Provided via the IO-Link interface of the IO-Link master.) |
| Supply voltage range | 19.2 V DC ... 30 V DC (including all tolerances, including ripple) |
| Nominal current per device | typ. 35 mA (±15% (at 24 V DC), max. 70 mA) |
| Protective circuit | Reverse polarity protection; yes |
| Short-circuit protection; yes | |
| Overload protection; yes | |
| Electrical isolation/isolation of the voltage ranges | |
| Test voltage: IO-Link bus logic | 500 V AC, 50 Hz, 1 min |
| Test voltage: Thermocouple I/O devices | 500 V AC, 50 Hz, 1 min |
| Test voltage: Functional ground | 500 V AC, 50 Hz, 1 min |
| IO-Link | |
| Number of ports | 1 |
| Connection method | M12 connector, A-coded |
| Connection technology | 3-conductor |
| Port type | Class A |
| Specification | V1.1.2 |
| Reverse polarity protection | yes |
| Transmission speed | 230.4 kbps (COM3) |
| Amount of process data | 64 bit (4x 16-bit input data) |
| Analog | |
| Input name | Analog TC inputs |
| Description of the input | Differential inputs |
| Number of inputs | 4 |
| Connection method | Push-in technology |
| Connection technology | 2-conductor |
| A/D conversion time | typ. 40 ms |
| A/D converter resolution | 24 bit |
| Sensor types that can be used (TC) | K/J |
| Measuring principle | Sigma/Delta process |
| Measured value representation | 16 bits |
| Protective circuit | Transient protection of inputs |
| Overload protection | |
| Wire-break detection | |
| Thermocouples | |
| Connection method | Push-in technology |
| Conductor cross-section, rigid | 0.2 mm² ... 1.5 mm² |
| Conductor cross-section, flexible | 0.2 mm² ... 1.5 mm² |
| Conductor cross-section AWG | 24 ... 16 |
| Stripping length | 8 mm |
| Dimensional drawing |
|
| Width | 150 mm |
| Height | 54 mm |
| Depth | 118 mm |
| Note on dimensions | When installing, note the length of the M12 connector for the IO-Link cable and the bending radii of the TC cables. |
| Color | light grey RAL 7035 |
| Housing material | PC |
| Ambient conditions | |
| Ambient temperature (operation) | -25 °C ... 60 °C |
| Degree of protection | IP65 (not UL-tested) |
| Air pressure (operation) | 70 kPa ... 106 kPa (up to 3000 m above sea level) |
| Air pressure (storage/transport) | 70 kPa ... 106 kPa (up to 3000 m above sea level) |
| Ambient temperature (storage/transport) | -25 °C ... 85 °C |
| Permissible humidity (operation) | 5 % ... 95 % |
| Permissible humidity (storage/transport) | 5 % ... 95 % |
| Protection class | III (IEC 61140, EN 61140, VDE 0140-1) |
| Mounting type | Screw mounting |
Your advantages
Connection to an IO-Link master with M12 connector (A-coded, 4-pos.)
IO-Link A port
IO-Link specification V1.1.2
Status indicators
4 differential inputs for thermocouples
Measuring range type K: -270°C ... +1,372°C
Measuring range type J: -210 °C ... +1200 °C
Selectable resolution 0.1 K/0.01 K
Connection of sensors in 2-conductor technology
M12 cable gland, Push-in Technology
Diagnostic information in the process data word
Supply of the module electronics via the IO-Link interface of the master
Degree of protection IP65