The plug-in power supply unit is intended for supplying power to class 400 LED enclosure lights.
A power supply unit and four country-specific plug adapters, e.g., for Europe, Great Britain, the USA, and Australia, are supplied as standard.
By connecting the country-specific plug adapter to the power supply unit, you can adapt the plug-in power supply unit to the installation location.
PLD E 400-PS/1AC/24DC/30W
-
Mains plug
2702436
Plug-in power supply unit for class 400 LED enclosure lights, including country-specific plug adapters for Europe, Great Britain, USA and Australia; max. output voltage 30 W
Product details
| Product type | Power module |
| Insulation characteristics | |
| Protection class | II |
| Nominal input voltage range | 100 V AC ... 240 V AC ±10 % |
| Voltage type of supply voltage | AC |
| AC frequency range | 50 Hz ... 60 Hz |
| Protective circuit | Surge protection |
| Short-circuit protection | |
| Overload protection | |
| Typical response time | max. 2 s |
| Discharge current to PE | max. 250 µA |
| Signal | |
| Maximum inrush current | 650 mA |
| Efficiency | ≥ 86.95 % |
| Nominal output voltage | 24 V DC ±5 % |
| Residual ripple | 120 mVPP |
| Output power | 30 W |
| Maximum no-load power dissipation | max. 0.1 W |
| Protective circuit | Surge protection |
| Dimensional drawing |
|
| Width | 55 mm |
| Height | 90 mm |
| Depth | 34 mm |
| Connecting cable length | 2 m |
| Ambient conditions | |
| Degree of protection | IP42 |
| Ambient temperature (operation) | 0 °C ... 40 °C (at maximum load) |
| Ambient temperature (storage/transport) | -20 °C ... 70 °C |
| Maximum altitude | 2000 m |
| Permissible humidity (operation) | 10 % ... 95 % (non-condensing) |
| Electromagnetic compatibility | Conformance with EMC Directive 2014/30/EU |
| Mounting type | Plugging into the mains socket |
Your advantages
High efficiency
Minimum standby power dissipation ≤ 0.1 W
IP42-tested interchangeable adapter system