Recently searched

Login

Products
Products overview

Find a Distributor

New products

Product navigator for device connection technology

Technologies

Customer-specific solutions

Configurators

Product Compliance

Cross Reference Search

Automate

Automation software

Edge computing

HMIs and IPCs

Industrial communication

PLCnext Technology

PLCs (controllers) and I/Os

Smart Services

Connect

Board-to-board connectors

Cables and lines

Connectors

Distribution blocks and device terminal blocks

Distributors, adapters, and conductor connectors

Electronics housings

PCB terminal blocks and PCB connectors

Plug-in test system

System cabling for controllers

Terminal blocks

Mark, assemble, and install

Automatic tools

Control cabinet accessories

Crimp connectors

Ferrules

Hand tools

Industrial lighting and signal lights

Junction boxes and empty enclosures

Marking material

Printers

Software for control cabinet building

Workstation solutions

Supply, charge, and protect

Charging technology for e-mobility

DC/DC converters and DC/AC inverters

Device circuit breakers

EMC filter

Power supplies

Protective relays for mains protection

Redundancy modules

Surge protection

Uninterruptible power supplies (UPS)

Switch, Measure and Monitor

Energy monitoring

I/O signal marshalling

Motor starters and electronic switching devices

Process indicators and field devices

Relays and optocouplers

Safety relay modules and sensors

Signal conditioners and measuring transducers

Industries & Applications
E-MOBILITY

Overview

Charging infrastructure

Electric vehicles

INFRASTRUCTURE

Building automation

Data Centers

Railway industry

Smart City

Transportation infrastructure

Water and wastewater treatment

POWER

Battery storage systems

Conventional power generation

DC grids in industry

Power transmission and distribution

Solar power

Wind power

PROCESS INDUSTRY

Marine and offshore

Mining

Power-to-X

Process automation

PRODUCTION, DEVICE AND SYSTEMS MANUFACTURING

Automotive industry

Control cabinet building

Device manufacturers

Automated Guided Vehicles (AGV)

Digital Factory

Electrical installations

Machine building

OTHER TOPICS

Agriculture

COMPLETE line

Data connectors for smart networks

Functional safety

Industrial remote communication

Industrial security

Power reliability

Video surveillance
Company
Overview

The Phoenix Contact Group

Careers

Our culture and attitude

All Electric Society

Compliance

Sustainability

History

Suppliers
Events & News
Overview

Events & trade fairs

News
Service & Support
Inform

Frequently Asked Questions

Information for device manufacturers

Product changes and discontinuations

Consult and Plan

Customer-specific solutions

Engineering Data for control cabinet building

Engineering Data for PCB Components

Configurators

Procure and Deliver

E-Business

Sample service for device manufacturers

Install and Operate

Services for marking solutions

Product Help

Returns and complaints

My Phoenix Contact
Login / Register

Registration Benefits

Shopping cart

My orders

My quotes and contracts

My Product Lists

My Comparison

The content you are viewing is tailored for Global. View Content for United States | Choose Another Country

Home
Products
SACC-E-M12MS-3P-M20/0,5/0,15VA - Device connector front mounting

SACC-E-M12MS-3P-M20/0,5/0,15VA - Device connector front mounting

1413927

Device connector front mounting, 3-position, Pin, M12, A-coding, Individual wires, cable length: 0.15 m, 0.50 mm², PVC litz wire, potted

Product details

Expand all Collapse all

Technical data

Notes

Notes on operation	The electrical and mechanical data specified assume that the connector pair is correctly locked and mounted. If the connector is unlocked and if there is a danger of contamination, the connector must be sealed using a protective cap > IP54. Influences arising from litz wires, cables or PCB assembly must also be taken into consideration.
Safety note
Safety note	WARNING: The connectors may not be plugged in or disconnected under load. Ignoring the warning or improper use may damage persons and/or property.
		• WARNING: Commission properly functioning products only. The products must be regularly inspected for damage. Decommission defective products immediately. Replace damaged products. Repairs are not possible.
		• WARNING: Only electrically qualified personnel may install and operate the product. They must observe the following safety notes. The qualified personnel must be familiar with the basics of electrical engineering. They must be able to recognize and prevent danger. The relevant symbol on the packaging indicates that only personnel familiar with electrical engineering are allowed to install and operate the product.
		• The products are suitable for applications in plant, controller, and electrical device engineering.
		• When operating the connectors in outdoor applications, they must be separately protected against environmental influences.
		• Assembled products may not be manipulated or improperly opened.
		• Only use mating connectors that are specified in the technical data of the standards listed (e.g. the ones listed in the product accessories online at phoenixcontact.com/products).
		• When using the product in direct connection with third-party manufacturers, the user is responsible.
		• For operating voltages > 50 V AC, conductive connector housings must be grounded
		• Ensure that when laying the cable, the tensile load on the connectors does not exceed the upper limit specified in the standards.
		• Observe the corresponding technical data. You will find information: o On the product o On the packing label o In the supplied documentation o Online at phoenixcontact.com/products under the product
		• Only use tools recommended by Phoenix Contact
		• Use a protective cap to protect connectors that are not in use. The suitable accessories are available online in the accessory section of the product at phoenixcontact.com/products
		• Ensure that the protective or functional ground has been properly connected.
		• VDE 0100/1.97 § 411.1.3.2 and DIN EN 60 204/11.98 § 14.1.3 are applicable when combining several circuits in a cable and/or connector
		• The connector warms up in normal operation. Depending on the ambient conditions, the surface of the connector can continue to warm up. In this case, the user is responsible for posting warnings (e.g. DIN EN ISO 13732-1:2008-12).

Mounting

Mounting type	Front mounting

Product properties

Product type	Circular connectors (device side)
Application	Signal
Number of positions	3
No. of cable outlets	1
Coding	A
Thread type	M12
Insulation characteristics
Overvoltage category	II
Degree of pollution	3

Material specifications

Material Molding compound	PUR (potted)
Flammability rating according to UL 94	V0
Seal material	HNBR
Contact material	CuZn
Contact surface material	Au
Contact carrier material	PA 6.6
Material for screw connection	Stainless steel
Conductor material	Tin-plated Cu litz wires

Electrical properties

Rated surge voltage	2.5 kV
Contact resistance	≤ 3 mΩ
Insulation resistance	≥ 100 MΩ
Nominal voltage U_N	250 V
Nominal current I_N	4 A

Connection data

Conductor connection
Connection method	Individual wires
Contact connection type	Pin
Conductor cross section	0.5 mm²

Mechanical properties

Mechanical data
Insertion/withdrawal cycles	> 100

Connector

Connection 1
Head design	Pin
Head thread type	M12
Coding	A

Cable/line

Cable length	0.15 m
Cable type	PVC litz wire
Wire diameter incl. insulation	2.5 mm
Single wire, color	brown, blue, black
Cable cross section	0.5 mm²
Conductor material	Tin-plated Cu litz wires
AWG signal line	20
Material wire insulation	TPE
Nominal voltage, cable	300 V
Test voltage, cable	2000 V AC
Ambient temperature (operation)	-40 °C ... 70 °C (cable, fixed installation)

Environmental and real-life conditions

Ambient conditions
Degree of protection	IP65/IP67/IP69/IP69K
Ambient temperature (operation) (male connector/female connector)	-25 °C ... 85 °C (Plug / socket)
		-40 °C ... 85 °C (without mechanical actuation)
Ambient temperature (operation) (Cable, fixed installation)	-40 °C ... 70 °C (cable, fixed installation)
UL Type Rating	Type 4 (indoor use only)

Standards and regulations

Standard designation	M12 circular connector
Standards/specifications	according to IEC 61076-2-101

Commercial data

Item number	1413927
Packing unit	1 pc
Minimum order quantity	1 pc
Product key	ABQCUC
GTIN	4055626012087
Weight per piece (including packing)	28.3 g
Weight per piece (excluding packing)	27.187 g
Customs tariff number	85444290
Country of origin	DE

Classifications

ECLASS

ECLASS-13.0	27440103
ECLASS-15.0	27440103

ETIM

ETIM 9.0

EC003570

UNSPSC

UNSPSC 21.0

39121400

Environmental product compliance

EU RoHS
Fulfills EU RoHS substance requirements	Yes
Exemption	6(c)
China RoHS
Environment friendly use period (EFUP)	EFUP-50 An article-related China RoHS declaration table can be found in the download area for the respective article under "Manufacturer declaration". For all articles with EFUP-E, no China RoHS declaration table issued and required.
EU REACH SVHC
REACH candidate substance (CAS No.)	Lead (CAS: 7439-92-1)

Compatible products

Expand all Collapse all

Accessories

PROT-M12 FS - Sealing cap 1560251
PROT-M12 FS-M - Sealing cap 1430488

Your advantages

Preassembled with litz wires for immediate use

Customer-specific assemblies and litz wire lengths available

Sealed on the litz wire side for optimum leak-tightness

All standard pin assignments and codings for signal, data, and power transmission with a uniform design-in design

For high transmission safety: shield connection to the housing with optional EMC nut

Where Can I Buy This Item?

Phoenix Contact GmbH & Co. KG

Flachsmarktstraße 8, D-32825 Blomberg

Ask a Question +49 5235-300 info@phoenixcontact.com

© 2025 Phoenix Contact Site notice Legal information Data privacy Whistleblowing system Privacy Settings