Wireless module - FL WLAN 2010
1119246

WLAN access point, client, mesh with two external antenna connections (RSMA-F), IP20, temperature range : -40°C … +60°C, WLAN 802.11 a, b, g, n, frequency: 2.4 GHz, 5 GHz, connections: COMBICON 9 V DC ... 32 V DC, RJ45: for LAN, web, http/https, CLI, REST API

Downloads

Product Details




Type Stand-alone
Product type Wireless module
Insulation characteristics
Pollution degree 2
Wireless card
Number 1
Type IEEE 802.11 a/b/g/n 2.4 GHz and 5 GHz to 300 Mbps
Assembly instructions Permanently installed

Supply: Module electronics
Connection technology COMBICON
Connection method Push-in spring connection
Note on the connection method Recommended conductor cross section: 0.75 mm²
Recommended ferrule: connection length 10 mm
Recommended crimping pliers: trapezoidal or square
Designation 1128752 FMC 1,5/ 3-ST-3,5-RF GY35BD1-3
Number of positions 3
Cross section range AWG 24 ... 16 (Use copper wires rated 75° C (UL))
Supply voltage 24 V DC (SELV)
Supply voltage range 9 V DC ... 32 V DC (PELV/SELV)
Supply current typ. 170 mA (at 24 V DC)
Current consumption max. 600 mA (at 9 V DC)

1128752 FMC 1,5/ 3-ST-3,5-RF GY35BD1-3
Connection method Push-in spring connection
Conductor cross section, rigid 0.2 mm² ... 1.5 mm²
Conductor cross section, flexible 0.2 mm² ... 1.5 mm²
Conductor cross section AWG 24 ... 16
Stripping length 10 mm

Antenna
Number 2
Functions
Configuration Web-based management, automated CLI
Quality of service (QoS) Yes
Security 802.11i
WPA PSK (preshared key)
WPA2
AES
TKIP
MAC filter
Supports 802.1X/RADIUS
Wireless licenses Europe, additional countries in the e-shop
Country support Belgium
Bulgaria
Denmark
Germany
Estonia
Finland
France
Greece
Great Britain
Ireland
Italy
Latvia
Liechtenstein
Lithuania
Luxembourg
Malta
Netherlands
Norway
Austria
Poland
Portugal
Romania
Sweden
Switzerland
Slovakia
Slovenia
Spain
Czech Republic
Hungary
Cyprus (rep.)
Japan
Ethernet (RJ45)
Number of interfaces 1
Connection method RJ45
Note on the connection method Auto negotiation and autocrossing
Transmission speed 10/100 Mbps
Transmission physics Copper
Transmission length 100 m (per segment)
No. of channels 1 (RJ45 ports)
Wireless
Designation Wireless LAN
Antenna connection method RSMA (female)
Frequency band 2.4 GHz
5 GHz
Wireless standard WLAN
IEEE 802.11
a
b
g
n
Transmission power max. 19 dBm (with two antennas)
Number of wireless interfaces 1 IEEE 802. 11 a/b/g/n
Wireless modules that can be connected 60 (In access point mode)

Dimensional drawing
Width 63 mm
Height 26 mm
Depth 113 mm
Note on dimensions Installed dimensions without connector

Material base plate Die-cast zinc, nickel-plated
Housing material Polycarbonate, PC

Ambient conditions
Degree of protection IP20
Ambient temperature (operation) -40 °C ... 60 °C
Air pressure (operation) 800 hPa ... 1080 hPa (up to 2000 m above sea level)
Air pressure (storage/transport) 660 hPa ... 1080 hPa (up to 3500 m above sea level)
Ambient temperature (storage/transport) -40 °C ... 85 °C
Permissible humidity (operation) 5 % ... 95 % (non-condensing)
Permissible humidity (storage/transport) 5 % ... 95 % (non-condensing)

ATEX
Identification  II 3 G Ex ec IIC T4 Gc
Certificate UL 21 ATEX 2514X
IECEx
Identification Ex ec IIC T4 Gc
Certificate IECEx ULD 21.0003X
CCC / China-Ex
Identification Ex nA IIC T4 Gc
Certificate 2021122310114455

Electrostatic discharge
Standards/regulations EN 61000-4-2
Electrostatic discharge
Contact discharge ± 4 kV
Indirect discharge ± 6 kV
Electromagnetic HF field
Standards/regulations EN 61000-4-3
Electromagnetic HF field
Frequency range 80 MHz ... 100 MHz
Test field strength 10 V/m
Frequency range 1000 MHz ... 6000 MHz
Test field strength 3 V/m
Fast transients (burst)
Standards/regulations EN 61000-4-4
Fast transients (burst)
Comments ±2.2 kV
Surge current load (surge)
Standards/regulations EN 61000-4-5
Surge current load (surge)
Signal ± 0.5 kV (symmetrical)
± 1 kV (asymmetrical)
Conducted interference
Standards/regulations EN 61000-4-6
Conducted interference
Frequency range 0.15 MHz ... 80 MHz
Voltage 10 V
Emitted interference
Standards/regulations EN 55022
Test result Class B

Mounting type DIN rail mounting
Assembly instructions Antennas not included in scope of supply

Item number 1119246
Packing unit 1 pc
Minimum order quantity 1 pc
Note Made to Order (non-returnable)
Product Key DNN2W4
GTIN 4063151048686
Weight per Piece (including packing) 266 g
Weight per Piece (excluding packing) 266 g
Customs tariff number 85176200
Country of origin DE


ECLASS

ECLASS-9.0 19170201
ECLASS-10.0.1 19170501
ECLASS-11.0 19170501

ETIM

ETIM 8.0 EC000816

UNSPSC

UNSPSC 21.0 43222600

KC

Approval ID: R-R-PCK-2035241270

IECEx

Approval ID: IECEx ULD 21.0003X

ATEX

Approval ID: UL 21 ATEX 2514X

REACh SVHC Lead 7439-92-1