The mobility revolution presents new challenges for both automobile manufacturers and the utility vehicle, passenger transport, and transportation industry. Seemingly long charging times threaten to undermine streamlined logistics and suitability for everyday use.
With our CHARX connect universal CCS charging inlets for universal use, we offer a High Power Charging interface that significantly reduces charging times for all electric vehicles. In addition to AC charging inlets and DC charging inlets for the GB/T standard, we have a comprehensive portfolio for all regions and applications.
“Above all, the vehicles of tomorrow will have their own battery and charging technology. High power and high range will be in demand. That requires large batteries and short charging cycles in turn. That is why we see ourselves as empowering the coming differentiation in vehicle development – and are already researching charging technologies that provide significantly more energy than our HPC products today, for example for particularly large utility vehicles.”
Your advantages
Discover the features and performance characteristics
Our CHARX connect universal vehicle charging inlets are waterproof and dustproof. With the use of an optimized sealing system, the charging inlets achieve a comprehensive degree of protection of up to IP67, and, in addition, IP6K6K/IP6K9K in the front area. The charging inlet is protected against moisture and dirt, even when the charging flap is open and the charging connector is not plugged in.
Our CHARX connect universal CCS charging inlets enable the vehicle-side use of High Power Charging (HPC) technology for the fast charging of electric vehicles of all types.
With cable cross-sections of up to 95 mm², you can continuously charge electric vehicles with our CCS charging inlets with 250 kW. Depending on other conditions such as the ambient temperature, the way the cables are laid in the vehicle, or the application-specific charging profile, you can even charge short-term at higher charging powers of up to 500 kW.
PTC chain on the AC contacts (charging with up to 80 A) The PTC sensor system in the AC area consists of a chain of resistors, each of which is located at one contact. By detecting the respective resistance values, safe shutdown is enabled if the limit temperature is exceeded.
Pt 1000 sensors at the DC contacts (charging with up to 500 A) In the DC area, charging is conducted with higher currents, therefore a precise temperature measurement is required. A Pt 1000 sensor is located at both DC contacts, enabling the temperature to be measured very precisely. Based on the evaluated measurement data, the requested DC charging current can be controlled dynamically by the vehicle. Immediate shutdown is initiated from a limit temperature of 90°C at the contact.
The precise temperature sensor technology of our vehicle charging inlets ensures a high level of safety during the charging process. The optimized connection technology between the DC power contacts and high-voltage cables additionally minimizes heating of the system.
The relevant external dimensions and screw-connection geometries of the CHARX connect universal CCS charging inlets and AC charging inlets are identical to each other. This enables you to plan the same installation space for each electric vehicle regardless of the target market – from ships to motorbikes.
As a reliable partner, we satisfy the high quality demands of our customers in the automotive industry. We are now channeling this expertise into all other types of electric vehicles. Our new generation of vehicle charging inlets was designed for universal use, whether for buses, road sweepers, bulldozers, mining vehicles, transportation vehicles, or sporty snowmobiles.
Our CHARX connect universal CCS charging inlets comply with the relevant standards IEC 62196, SAE J1772, and GB/T 20234.
PHOENIX CONTACT E-Mobility is certified in accordance with IATF 16949.
References
Examples of customers who successfully use our CCS charging inlets
The German manufacturer is a technological pioneer and one of the most successful brands in Europe in the all-electric premium cars segment. We supply Audi and other brands of the VW Group with customer-specific charging inlets.
Normet, a global technology company headquartered in Finland, manufactures innovative battery-powered electric vehicles for tunnel construction, underground mining, and open pit mining – all equipped with our CCS charging inlets for ultra-fast charging.
The Swiss company Designwerk Technologies AG specializes in the production of custom electric trucks. The heavy-duty trucks with up to 680 hp have batteries that are rated up to 1,000 kWh. Our CCS charging inlets are used for fast charging them.
The Dutch manufacturer Ebusco produces electric buses. In passenger transport as well, the market demands high ranges and the ability to recharge quickly on the move. This is why Ebusco relies on our vehicle charging inlets, which can be used to charge short-term at up to 500 kW.
The BMW Group is one of the leading providers of premium e-mobility. Since 2017, every all-electric BMW and MINI has been equipped with our vehicle charging inlet to enable fast and convenient charging.
Energica is the first Italian manufacturer of powerful and sporty electric motorcycles to install the universal CCS charging inlets in all its models. They enable the fast and safe charging of the motorcycles and support the company in its mission to achieve zero-emission mobility.
The research and development company STARD is part of the Austrian Stohl Group and specializes in the electrification of motorsports racing cars. Our jet water-proof and dirt-proof CCS charging inlets are used for the ultra-fast charging of the e-rally vehicles.
The Bavarian company EVUM Motors GmbH offers the aCar, a battery-electric van for the municipal sector, agriculture and forestry. The stable, robust utility vehicle is equipped with our CCS charging inlets, which are ideally suited to the demanding fields of application due to their high IP protection class.
3D view of a type 2 CCS charging inlet
Experience all details in 3D
View the product in the greatest level of detail. The type 2 CCS vehicle charging inlet can be viewed from all angles using the zoom and rotation functions.
If your vehicle is fast-charging- or HPC-capable, you will find the right charging inlet here, in accordance with the necessary charging standard and desired charging power. All product data sheets and CAD files are available for downloading at the bottom of the table. Equipped with a CCS (Combined Charging System) charging inlet, your vehicles can be charged with both direct current (DC) and alternating current (AC).
CCS type 1
CCS type 2
GB/T DC
Region
North America, South Korea
Europe, Australia, Greenland, India, Saudi Arabia, South Africa, South America, and other countries
China
AC and DC charging with just one charging inlet
External dimensions and screw-connection geometries identical to each other
Are you looking for a customized charging inlet?
Individualize your charging interface
For many leading OEMs, we have already developed custom vehicle charging inlets that satisfy the stringent requirements of the automotive industry in accordance with IATF 16949.
We will integrate or develop features in line with the demands of your series vehicles, such as:
Customized integration of the charging inlet in the vehicle installation space
LED indicators and lighting
Extra operating elements
Charging connector and charging flap interlock
Selection and integration of intelligent cooling concepts including high-precision temperature measurement to meet the vehicle charging curve
