Busbar for the CAPAROC system with 8 slots. For installation on a DIN rail.
| General | |
| Note | LABS release – in accordance with test specification VW PV 3.10.7:2005-0 |
| When using CAPAROC E1... modules, for continuous shock in accordance with IEC 60068-2-27 the 6 ms / 15g degree of severity applies | |
| Product type | Device circuit breakers |
| Insulation characteristics | |
| Protection class | III |
| Pollution degree | 2 |
| Rated voltage | 24 V DC |
| Rated current IN | 45 A DC (Total current input) |
| Dimensional drawing |
|
| Width | 49.4 mm |
| Height | 44 mm |
| Depth | 22.5 mm (incl. DIN rail 7.5 mm) |
| Color | light grey RAL 7035 |
| Material | Copper (Busbar) |
| PC (Housing) | |
| Flammability rating according to UL 94 | V-0 |
| Ambient conditions | |
| Degree of protection | IP20 |
| Ambient temperature (operation) | -30 °C ... 65 °C (The temperature range of the power module must be taken into consideration) |
| Ambient temperature (storage/transport) | -40 °C ... 70 °C |
| Altitude | ≤ 4000 m (amsl (above mean sea level)) |
| Humidity test | 96 h, 95 % RH, 40 °C |
| Shock (operation) | 30g (11 ms period, half-sine shock pulse, according to IEC 60068-2-27) |
| 25g (6 ms duration, half-sine shock pulse in accordance with IEC 60068-2-27, continuous shock) | |
| 15g (6 ms duration, half-sine shock pulse in accordance with IEC 60068-2-27, continuous shock. If more than six CAPAROC E1 modules are used in the system.) | |
| Vibration (operation) | 5g (10 ... 150 Hz / 10 cycles / axis / X, Y, Z) |
| Standards/specifications | EN 61000-6-2 |
| Standards/specifications | EN 61000-6-3 |
| Standards/specifications | EN 60068-2-78 |
| Standards/specifications | EN 50178 |
| Standards/specifications | EN 60068-2-6 |
| Standards/specifications | EN 60068-2-27 |
| Mounting type | DIN rail: 35 mm |