RIF-0-RSC-24DC/ 1 - Relay Module

Pre-assembled relay module with screw connection, consisting of: relay base with ejector and power contact relay. Contact type: 1 N/O contact. Input voltage: 24 V DC

Product Details

The pluggable electromechanical and solid-state relays in the RIFLINE complete product range and the base are recognized and approved in accordance with UL 508. The relevant approvals can be called up at the individual components in question.

Product type Relay Module
Product family RIFLINE complete
Application Universal
Operating mode 100% operating factor
Mechanical service life approx. 2x 107 cycles
Insulation characteristics
Insulation safe isolation
Insulation characteristics
Insulation safe isolation
Overvoltage category III
Pollution degree 2

Service life electrical see diagram
Maximum power dissipation for nominal condition 0.22 W
Test voltage (Winding/contact) 4 kVrms (50 Hz, 1 min., winding/contact)
Rated insulation voltage 250 V AC
Rated surge voltage 6 kV

Coil side
Nominal input voltage UN 24 V DC
Input voltage range 19.2 V DC ... 36 V DC (20 °C)
Input voltage range in reference to UN see diagram
Typical input current at UN 9 mA
Typical response time 5 ms
Typical release time 8 ms
Coil voltage 24 V DC
Protective circuit Freewheeling diode
Operating voltage display Yellow LED

Contact type 1 N/O contact
Type of switch contact Single contact
Drive and function monostable
Drive (polarity) bipolar
Contact material AgSnO
Maximum switching voltage 250 V AC/DC
Minimum switching voltage 5 V (100 mA)
Limiting continuous current 6 A
Maximum inrush current 10 A (4 s)
Min. switching current 10 mA (12 V)
Interrupting rating (ohmic load) max. 140 W (24 V DC)
20 W (48 V DC)
18 W (60 V DC)
23 W (110 V DC)
40 W (220 V DC)
1500 VA (250 V AC)
Utilization category CB Scheme (IEC 60947-5-1) AC15, 3 A/250 V (N/O contact)
AC15, 1 A/250 V (N/C contact)
DC13, 1.5 A/24 V (N/O contact)
DC13, 0.2 A/110 V (N/O contact)
DC13, 0.1 A/220 V (N/O contact)

Connection method Screw connection
Stripping length 7 mm
Conductor cross section solid 0.5 mm² ... 4 mm²
Conductor cross-section solid (2 conductors with same cross section) 0.5 mm² ... 1.5 mm²
Conductor cross section flexible 0.5 mm² ... 2.5 mm²
0.5 mm² ... 2.5 mm² (Ferrules without plastic sleeve)
0.5 mm² ... 1.5 mm² (Ferrule with plastic sleeve)
Conductor cross section flexible (2 conductors with same cross section) 0.5 mm² ... 1.5 mm²
0.5 mm² ... 1 mm² (TWIN ferrule with plastic sleeve)
Conductor cross section AWG 20 ... 12 (solid)
20 ... 14 (flexible)
Tightening torque 0.5 Nm ... 0.6 Nm

Width 6.2 mm
Height 84 mm
Depth 68 mm

Flammability rating according to UL 94 V2 (Housing)

Ambient conditions
Degree of protection Relay base IP20 (Relay base)
RT III (Relay)
Ambient temperature (operation) -40 °C ... 60 °C
Ambient temperature (storage/transport) -40 °C ... 85 °C

Corrosive gas test
Identification ISA-S71.04. G3 Harsh Group
EN 60068-2-60

Standards/regulations IEC 60947-5-1

Mounting type DIN rail mounting
Assembly instructions in rows with zero spacing
Mounting position any

Item number 2903366
Packing unit 1 pc
Minimum order quantity 10 pc
Sales Key C05
Product Key CK6518
Catalog Page Page 321 (C-5-2019)
GTIN 4046356732949
Weight per Piece (including packing) 27.09 g
Weight per Piece (excluding packing) 27.09 g
Customs tariff number 85364190
Country of origin CN


ECLASS-9.0 27371601
ECLASS-10.0.1 27371601
ECLASS-11.0 27371601
ECLASS-12.0 27371601
ECLASS-13.0 27371601


ETIM 8.0 EC001437


UNSPSC 21.0 39122300


Approval ID: TR_TS_D_00573_c


Approval ID: TAA000018V


Approval ID: RU*C-DE.*08.B.00010


Approval ID: RU D-DE.B*00573/18

REACh SVHC Lead 7439-92-1
China RoHS Environmentally Friendly Use Period = 50 years
For information on hazardous substances, refer to the manufacturer’s declaration available under “Downloads”

Compatible Products