Sleeve receiver for 1.5 mm2 sleeves
Automatic stripping and crimping devices
Two functions in one device: strip and crimp wires quickly and reliably in just one step with our automatic stripping and crimping devices. The compact CF 3000 automatic stripping and crimping device can be used to process taped ferrules. For bulk processing, use the robust CF 1000 automatic tool. With the portable automatic stripping and crimping device, it takes just two seconds to assemble the wires.
More information- Availability
- Product type
- Conductor cross-section range
- Conductor cross-section, AWG
- Crimping
- Frequency
- Height
- Insertion length
Sleeve receiver for 2.5 mm2 sleeves
Sleeve receiver for 1.0 mm2 sleeves
Automatic stripping and crimping device, 120 V version, for taped insulated ferrules 0.25 mm2 ... 2.5 mm2, sleeve length 8 mm, incl. 0.5 mm2 ... 2.5 mm2 conversion kits
Sleeve receiver for 0.75 mm2 sleeves
Replacement cable guide 1.0 mm2, for sleeve feed CF 3000 HZG 1,0
Replacement cable guide 2.5 mm2, for sleeve feed CF 3000 HZG 2,5
Replacement blade, for CF 3000-2,5 automatic stripping and crimping device
Replacement cable guide 1.5 mm2, for sleeve feed CF 3000 HZG 1,5
Sleeve receiver for 0.5 mm2 sleeves
Your advantages
- Fast cross-section change due to the modular design
- Short cycle time with perfectly coordinated subprocesses
- Easy startup with Plug and Play
- Time savings of up to 75% using CRIMPHANDY due to the combination of work steps and very easy operation
The portable stripping and crimping device
Classic conductor preparation involves two steps, two tools, and a lot of time. The portable stripping and crimping device from Phoenix Contact revolutionizes this process: just one tool, one work step, and time savings of around 75%.
The portable stripping and crimping device is a handheld device for stripping conductors and crimping ferrules in one step that takes less than two seconds. Automatic monitoring functions ensure high-quality crimping every time.
Stripping and crimping in less than two seconds
Crimphandy hand tool
Very easy operation
The automated stripping and crimping function makes operating the device easier: insert an unprocessed conductor, strip and crimp it automatically – and you’re done!
The portable stripping and crimping device continually indicates its operating state via color LEDs. There are only operating elements for switching the device on/off and resetting it.
Prevention of incorrect crimping with capacitive sensor technology
Optimum results
The portable stripping and crimping device is equipped with capacitive sensor technology for detecting the cross-section of inserted conductors. The device automatically detects if a conductor does not fit, reliably preventing faulty crimping. The error is indicated via an LED.
This guarantees high-quality crimping results. The device’s square crimping function can be used for all terminal points and terminal shafts. The pull-out forces exceed the specified standard conditions.
Mobile use with high-power battery
Mobile use
Work in or around the control cabinet does not need to be hindered by cables or hoses. The portable stripping and crimping device has a powerful, easy-to-replace lithium-ion polymer battery for up to 2000 crimping operations.
This means that the portable handheld device is ready to use for several days. The fast charger provided with the device charges the battery to full capacity in just one hour.
Automatic ferrule feeding
Uninterrupted working
The portable stripping and crimping device has an integrated magazine for ferrules in strip form. The automatic feed allows multiple conductors to be crimped one after another without interruption.
Collecting chamber for waste insulation
Clean working environment
The portable stripping and crimping device has a lightweight, removable collecting chamber for waste insulation. This guarantees a clean working environment. It allows the device to be used inside a control cabinet.
Easy conductor cutting
Easy conductor cutting
The CRIMPHANDY CUTTER lets you cut conductors to the right length correctly and easily. The practical cutter is quick and easy to install.
CF 3000 portable stripping and crimping device
CF 3000 stripping and crimping device Compact and portable for taped products
For mobile applications, use the CF 3000 compact stripping and crimping device. With this device, you can quickly and safely process bulk ferrules in tape format.
The conductor is stripped and then crimped with a ferrule in just one step.
The automatic device can be adapted to various cross-sections in less than a minute.
- For insulated ferrules in the cross-section range from 0.25 to 2.5 mm²
- Can be adapted to various cross-sections in less than a minute
- Can be used at different workstations, thanks to its compact, lightweight design
CF 1000 stripping and crimping device for bulk processing
CF 1000 stripping and crimping device Robust and stationary for bulk goods
For bulk processing, use the sturdy and robust CF 1000 stripping and crimping device.
The conductor is stripped and then crimped with a ferrule in just one step. You can process up to 1,200 conductors per hour with this automatic device.
- For insulated ferrules in the cross-section range up to 10 mm²
- Quick adaptation to various cross-sections, thanks to the modular design
- Integrated counter for an overview of batch sizes