CMS-PEN 0,35
- Marker pen
CMS-PEN 0,35
- Marker pen
5067828
Marker pen, incl. adapter, ink tank and reservoir, 0.35 mm nib
Plotter and engraver
Our plotter marks high-quality marking materials to create durable markings. Simply switching the standard plotter head with the engraving unit converts the plotter into an engraving system. Markings created with this system are very durable even under extreme conditions.
CMS-INK-TR-C5
- Ink cartridge
CMS-INK-TR-C5
- Ink cartridge
5146684
Ink cartridge, special black ink, 5 cartridges of 1 ml each, for high demands
CMS-DISPOSABLE-PEN 0,25 TR
- Marker pen
CMS-DISPOSABLE-PEN 0,25 TR
- Marker pen
5146685
Disposable pen, incl. adapter, integrated ink cartridge and pen station, writing thickness: 0.25 mm
CMS-P1-PREPLATES
- Plotter accessories
CMS-P1-PREPLATES
- Plotter accessories
5145135
50 marking preparation plates for the pen station of the plotter systems
P-PEN
- Disposable pen, non-refillable
P-PEN
- Disposable pen, non-refillable
0815211
Disposable marker pen, non-refillable, for manual marking, can also be used for plotter marking in combination with the P-PEN ADAPTER, line thickness 0.1 mm
CMS-R-SET-TR
- Cleaning set
CMS-R-SET-TR
- Cleaning set
5146751
Cleaning set, consisting of: 1x cleaning cup, 2x cleaning cartridges with 10 ml cleaning fluid each and 2x replacement sealing caps for the CMS-PEN ... and CMS-DISPOSABLE-PEN ...
B-STIFT
- Marker pen
B-STIFT
- Marker pen
1051993
Marker pen, for manual labeling of unprinted Zack strips, smear-proof and waterproof, line thickness 0.5 mm
CMS-P1-M/ZBF
- Magazine insert
CMS-P1-M/ZBF
- Magazine insert
5144709
Plastic magazines for CMS-P1-PLOTTER and PLOTMARK. For accommodating 26 flat zack marker strips or ZBN strips
CMS-PEN 0,25
- Marker pen
CMS-PEN 0,25
- Marker pen
5067815
Marker pen, incl. adapter, ink tank and reservoir, 0.25 mm nib
CMS-P1-M/ZB
- Magazine insert
CMS-P1-M/ZB
- Magazine insert
5144699
Plastic magazines for CMS-P1-PLOTTER and PLOTMARK. For accommodating 22 zack marker strips
Your advantages
- Easy operation of the plotter with the PROJECT complete marking software
- Fast startup with a USB and Centronics interface
- User-friendly: clear operation with just four keys
The plotter with engraving unit
The plotter with engraving unit is the ideal marking system for use in workshops.
You can use the system to engrave metals and special double-layer plastics. Engraving chisels are available with diameters ranging from 0.2 to 1.0 mm for creating different line thicknesses.
Engraved labels can be used, for example, to mark cables that are laid in the ground.
Create durable markings for aggressive environments.