Surge protection for charging stations and home chargers

No-risk charging: With our CHARX protect surge protective devices, you can protect charging stations and electric vehicles against damage due to overvoltages which can arise due to lightning strikes or switching operations in the grid. We can provide you with various protective device types for a comprehensive protection concept to ensure that your charging infrastructure remains available at all times – at any time of the day or night, and in any weather.

Filter:

Availability
Approval
Arrester class in accordance with IEC
Design
Fault alarm
Lightning impulse current
Nominal discharge current
Nominal voltage

Go to Product Detail Page for item 2907916

PLT-SEC-T3-24-FM-UT - Type 3 surge protection device

PLT-SEC-T3-24-FM-UT - Type 3 surge protection device

2907916

Type 3 surge protection, consisting of protective plug and base element, with integrated status indicator and remote signaling for single-phase power supply networks. Nominal voltage: 24 V AC/DC

Go to Product Detail Page for item 2881007

DT-LAN-CAT.6+ - Surge protection device

DT-LAN-CAT.6+ - Surge protection device

2881007

Surge protection in accordance with Class EA (CAT6A), for Gigabit Ethernet (up to 10 Gbps), token ring, FDDI/CDDI, ISDN, and DS1. Suitable for Power over Ethernet (PoE++ / 4PPoE) “Mode A” and “Mode B”. RJ45 attachment plug with separate grounding cable and ground connection snap-on foot for NS 35 DIN rails.

Go to Product Detail Page for item 2907920

PLT-SEC-T3-24-P-UT/PT - Type 3 surge protection plug

PLT-SEC-T3-24-P-UT/PT - Type 3 surge protection plug

2907920

Replacement plug for type 3 surge protection from the PLT-SEC-…-UT/PT product series. Nominal voltage 24 V.

Go to Product Detail Page for item 1380661

FLT-MB-T1-264/12.5-3+1-UT - Type 1+2+3 combined lightning current and surge arresters

FLT-MB-T1-264/12.5-3+1-UT - Type 1+2+3 combined lightning current and surge arresters

1380661

Spark gap-based non-pluggable lightning current arrester / surge protective device free of leakage current for 3-phase power supply networks with separate N and PE (5-conductor system: L1, L2, L3, N, PE), for use in the unmetered area, for lightning protection levels III and IV.

Go to Product Detail Page for item 1380667

FLT-MB-T1-264/12.5-3+1-UT-R - Type 1+2+3 combined lightning current and surge arresters

FLT-MB-T1-264/12.5-3+1-UT-R - Type 1+2+3 combined lightning current and surge arresters

1380667

Go to Product Detail Page for item 1380466

CHARX-PROTECT-11-22KW - Type 2 surge arrester

CHARX-PROTECT-11-22KW - Type 2 surge arrester

1380466

CHARX protect retrofit, surge protection set for protecting charging stations with an output of 11 kW ... 22 kW, such as home chargers. Surge protective device consisting of a base element with Push-in connection technology, remote indication contact, and protective plugs, nominal voltage: 230 V AC, 3+1 wiring

Go to Product Detail Page for item 2907925

PLT-SEC-T3-24-FM-PT - Type 3 surge protection device

PLT-SEC-T3-24-FM-PT - Type 3 surge protection device

2907925

Type 3 surge protection, consisting of protective plug and base element, with integrated status indicator and remote signaling for single-phase power supply networks. Nominal voltage: 24 V AC/DC

Go to Product Detail Page for item 1180150

VAL-EV-T1/T2 264/12.5/3+1-R - Lightning/surge arrester type 1/2

VAL-EV-T1/T2 264/12.5/3+1-R - Lightning/surge arrester type 1/2

1180150

CHARX protect advanced: Plug-in lightning surge/surge protective device, in accordance with Type 1/2 / Class I/II, for 3-phase power supply networks with separate N and PE (5-conductor system: L1, L2, L3, N, PE), with remote indication contact. Specifically designed for use in e-mobility.

Go to Product Detail Page for item 1035864

VAL-MS-BE-PCB-FM - Surge protection base-element

VAL-MS-BE-PCB-FM - Surge protection base-element

1035864

Single-channel base element for surge protective devices VAL-MS series type I and type II, for isolated and grounded voltage systems up to 1500 V DC and 690 V AC, for space-saving PCB installation, with integrated remote indication contact

Go to Product Detail Page for item 1180149

VAL-EV-T1/T2 264/12.5/3+1 - Lightning/surge arrester type 1/2

VAL-EV-T1/T2 264/12.5/3+1 - Lightning/surge arrester type 1/2

1180149

Your advantages

Complete protection for your charging infrastructure thanks to the comprehensive product range
Uninterrupted continuation of the charging process with a protected power supply
Protection for the connected e-vehicle with a safe surge protection concept

Presentation by our Product Manager

Presentation of CHARX protect surge protective devices MovingImage

Open charging station with charging cables

Charging electric vehicles safely and without interruptions Comprehensive protection concept

The charging infrastructure for electric vehicles is just as complex as the vehicle itself. From the power supply and components for visualizing the charging process to the cables for Ethernet communication, the charging station is equipped with a large number of important and sensitive components. They need to be protected to ensure that the charging infrastructure has a long service life and that the charging process is uninterrupted.

A comprehensive protection concept therefore consists of three areas:

The type 1 and type 2 combined lightning current and surge arresters and type 2 protective devices for the power supply protect feed-in against dangerous overvoltages caused by lightning strikes and switching operations from the grid.
Use type 3 surge protective devices to ensure the long-term function of numerous sensitive components within your charging station.
The communication components are usually connected over Ethernet and should also be protected.

The right protection for every application Discover our comprehensive product portfolio

Surge protective devices for protecting the feed-in system

Lightning current arresters and surge protective devices for protecting the feed-in system

Surge protective devices for protecting sensitive components

Surge protective devices for protecting Ethernet communication

Surge protective devices for PCB mounting

Protecting the feed-in

If you can rule out the possibility of direct lightning strikes to the charging station or home charger, a type 2 protective device provides sufficient protection for your application. The VAL-EV-T2 surge protective device, designed specifically for this type of application, ensures reliable feed-in. The connected vehicle is also protected, and the charging process can be continued without interruption if any overvoltages occur.

Protecting the feed-in – even from lightning strikes

The VAL-EV-T1/T2 lightning current and surge protective device, designed specifically for charging stations, provides safe and reliable protection against overvoltages caused by lightning strikes and switching operations. The high voltage peaks on the supply lines caused by an overvoltage can result in damage to equipment and the connected vehicle. The surge protection limits these voltages via the varistor-based combined lightning current and surge arrester, which ensures permanent availability.

Feed-in protection – especially for home chargers

CHARX-PROTECT-11-22 KW is the optimal surge protection for home chargers in the carport: The type 2 arrester integrated into the IP65 housing protects home chargers with charging capacities of 11 to 22 kW as well as the connected vehicle against expensive damage due to voltage peaks that can be caused by lightning strikes or switching operations in the supply grid. The weatherproof and impact-resistant box can be installed in weather-protected outdoor areas, for example in the carport. To match the existing cable routing, the feeding AC cable can be fed into the housing either at the top or at the bottom. Internal wiring is particularly fast thanks to the push-in connection.

Directly to the product

Protecting sensitive components

Many components in charging stations with a 24 V power supply are sensitive and susceptible to voltages that are too high. Protect these components with a type 3 surge protective device. The PLT-SEC for 24 V DC can be installed quickly thanks to the proven Push-in connection technology.

Protecting the Ethernet communication

It is not just in public spaces that charging stations are often equipped with components for communication with billing or building management systems, such as cellular modems or Ethernet switches. Even these devices are sensitive to overvoltages. The DT-LAN surge protective devices for information technology provide the ideal solution here. The Ethernet cables are protected and operation is ensured.

Protective device for PCB mounting

The VAL-MS-BE PCB base element is designed for direct mounting on a printed circuit board. It is equipped for all protective plugs in the VALVETRAB MS product range. The protective plugs for the VAL-EV surge protective devices, designed specifically for charging stations, can also be used here. This range includes T1+T2 combined lightning current and surge arresters as well as type 2 surge protective devices.

3D product view

Experience all details in 3D

View the surge protective device in the greatest level of detail. The product can be viewed from any angle using free zoom and rotate functions.

To the 3D product view