MCR-SL-S-100-I-LP - Current transducers

2813486

MCR current measuring transducer, for measuring sinusoidal and non-sinusoidal alternating currents, input current 0...100 A, loop-powered output with 4...20 mA

Product details

Product type	Current transducer
Insulation characteristics
Overvoltage category	III
Pollution degree	2

Maximum power dissipation for nominal condition	1 W
Test voltage input/output	4.13 kV AC (50 Hz, 60 s)
Step response (10-90%)	< 340 ms
Maximum temperature coefficient	< 0.025 %/K
Maximum transmission error	< 1 % (of final value)
Rated insulation voltage	300 V AC (to earth)
Supply
Supply voltage range	loop-powered, no external supply necessary

Signal
Configurable/programmable	Yes
Current input signal	0 A ... 100 A
Measurement
Input current range	0 A AC ... 50 A AC
	0 A AC ... 75 A AC
	0 A AC ... 100 A AC
Setting range for min. input current	0 A AC ... 50 A AC
Setting range for max. input current	0 A AC ... 100 A AC
Overload capacity	Depending on laid conductor
Surge strength	Depending on through connected conductor
Frequency measuring range	30 Hz ... 6000 Hz
Curve type	Sinusoidal and non-sinusoidal
Operate threshold	1 % (of final value)

Signal: Current
Current output signal	4 mA ... 20 mA
Max. current output signal	< 25 mA
Load/output load current output	(U_B - 12 V) x 350 / 12 A

Connection method	Screw connection
Stripping length	8 mm
Screw thread	M3
Conductor cross section rigid	0.2 mm² ... 2.5 mm²
Conductor cross section flexible	0.2 mm² ... 2.5 mm²
Conductor cross section AWG	24 ... 14
Tightening torque	0.5 Nm ... 0.6 Nm (4,4 ... 5,31 lbf-in.)
Connection method	Through connection

Item dimensions
Width	55 mm
Height	85 mm
Depth	70.5 mm
Circular conductor
Diameter	≤ 18.5 mm

Color	green (RAL 6021)
Housing material	Polyamide PA non-reinforced

Ambient conditions
Degree of protection	IP20
Ambient temperature (operation)	-20 °C ... 60 °C
Ambient temperature (storage/transport)	-40 °C ... 85 °C

CE
Certificate	CE-compliant
UKCA
Certificate	UKCA-compliant
UL, USA/Canada
Identification	UL/C-UL Listed UL 508
	Class I, Div. 2, Groups A, B, C, D T4A
	Class I, Zone 2, Group IIC T4A
	Or Non-Hazardous Locations only

Mounting type	DIN rail mounting
Mounting position	any

Commercial data

Item number	2813486
Packing unit	1 pc
Minimum order quantity	1 pc
Product key	CK4A23
Catalog page	Page 235 (C-5-2019)
GTIN	4046356043663
Weight per piece (including packing)	141.4 g
Weight per piece (excluding packing)	141.4 g
Customs tariff number	85437090
Country of origin	JP

Classifications

Approvals

Environmental product compliance

Your advantages

Can be retrofitted with open-up Rogowski coil

Loop-powered

30 ... 6000 Hz true r.m.s. value measurement

Measuring range selection via slide switch

ECLASS-11.0	27210123
ECLASS-12.0	27210123
ECLASS-13.0	27210123

EU RoHS
Fulfills EU RoHS substance requirements	Yes (No exemptions)
China RoHS
Environment friendly use period (EFUP)	EFUP-25 An article-related China RoHS declaration table can be found in the download area for the respective article under "Manufacturer declaration". For all articles with EFUP-E, no China RoHS declaration table issued and required.
EU REACH SVHC
REACH candidate substance (CAS No.)	No substance above 0.1 wt%

Automate

Connect

Mark, assemble, and install

Supply, charge, and protect

Switch, Measure and Monitor

MCR-SL-S-100-I-LP - Current transducers

2813486

Product details

ECLASS

ETIM

UNSPSC

EAC

UL Listed

cUL Listed

cULus Listed

Your advantages

Automate

Connect

Mark, assemble, and install

Supply, charge, and protect

Switch, Measure and Monitor

MCR-SL-S-100-I-LP - Current transducers 2813486

Product details

ECLASS

ETIM

UNSPSC

Your advantages

MCR-SL-S-100-I-LP - Current transducers

2813486