Circular connector (cable-side) - SACC-M12MSB-2PL SH PB 1424678

Data connector, PROFIBUS DP (12 Mbps), 2-position, shielded, Plug straight M12, Coding: B, Push-in connection, knurl material: Zinc die-cast, nickel-plated, external cable diameter 4 mm ... 8 mm

Product Details




Assembly instructions The wires can be connected both with ferrules and without ferrules

Shielded yes
Cable structure
Signal type/category PROFIBUS DP, 12 Mbps
Stripping length of the individual wire 7 mm

Insertion/withdrawal cycles ≥ 100
Header 1
Type Plug straight

Rated surge voltage 1.5 kV
Contact resistance ≤ 5 mΩ
Insulation resistance ≥ 100 MΩ
Nominal voltage UN 48 V AC
Nominal voltage UN 60 V DC
Nominal current IN 4 A (2 A when using 0.14 mm2 conductors)

Dimensional drawing
M12 SPEEDCON plug, straight, shielded
Length 60 mm
External dimensions
External diameter 4 mm ... 8 mm
Housing
Diameter housing 19 mm

Degree of protection IP65
Degree of protection IP67
Degree of protection IP65/IP67
Ambient temperature (operation) -40 °C ... 85 °C (Plug / socket)

Connection technology
Connection method Push-in connection
External diameter 4 mm ... 8 mm
Conductor connection
Connection method Push-in connection
Conductor cross section flexible 0.14 mm2 ... 0.75 mm2
Cross section AWG 26 ... 18

Assembly instruction: NOTE: Observe the permissible bending radii when laying conductors, since the degree of protection may be put in jeopardy if the bending forces are too high. Alleviate mechanical loads upstream of the connector, e.g. by using cable ties.
Environmental Product Compliance
China RoHS Environmentally friendly use period: unlimited = EFUP-e
China RoHS No hazardous substances above threshold values

Standards/specifications IEC 61076-2-101
Standards/specifications EN 50155:2001
Testing
Standards/regulations PA 6.6: Fire protection in rail vehicles - requirement sets R22, R23, R24, R25, and R26 acc. to DIN EN 45545-2 (Risk level HL1 - HL3)
Standards/regulations PA 6: Fire protection in rail vehicles - requirement sets R22, R23, and R24 acc. to DIN EN 45545-2 (Risk level HL1 - HL3)

Material TPE-U (Clamping cage, weight: 1.1 g)
Material PA 6 (Actuation lever)
Flammability rating according to UL 94 V0
Sealing material NBR
Material of grip body Zinc die-cast, nickel-plated
Contact material CuSn
Contact surface material Ni/Au
Contact carrier material PA 6.6
Cable gland material Zinc die-cast, nickel-plated
Standards/regulations PA 6.6: Fire protection in rail vehicles - requirement sets R22, R23, R24, R25, and R26 acc. to DIN EN 45545-2 (Risk level HL1 - HL3)
Standards/regulations PA 6: Fire protection in rail vehicles - requirement sets R22, R23, and R24 acc. to DIN EN 45545-2 (Risk level HL1 - HL3)

Number of positions 2
Coding B - inverse
Insulation characteristics
Overvoltage category II
Degree of pollution 3


Order Key 1424678
Packing unit 1 pc
Minimum order quantity 1 pc
Catalog Page Page 422 (C-2-2019)
GTIN 4055626376059
Weight per Piece (including packing) 37.0 GRM
Weight per Piece (excluding packing) 37.0 GRM
Customs tariff number 85366990
Country of origin DE



EAC

UL Listed

Approval Specification Data
Nominal voltage UN 60 V
Nominal current IN 4 A
AWG/kcmil
Min. cross section 26 mm²
Max. cross section 18 mm²

cUL Listed

Approval Specification Data
Nominal voltage UN 60 V
Nominal current IN 4 A
AWG/kcmil
Min. cross section 26 mm²
Max. cross section 18 mm²

EAC

cULus Listed


Your advantages

Conveniently connect stranded conductors, thanks to lever
Easy and tool-free connection by means of Push-in Technology
Flexible signal and data cabling
Quick and easy installation, thanks to Push-in connection technology
Reliable and quick connection of electric cables