Circular connector (cable-side) - SACC-M12FRD-4PL SH PN 1424685

Data connector, PROFINET CAT5 (100 Mbps), 4-position, shielded, Socket angled M12, Coding: D, Push-in connection, knurl material: Zinc die-cast, nickel-plated, external cable diameter 4 mm ... 8 mm

Product Details




Assembly instructions The connector pin assignment can be rotated 45° to the cable outlet
The wires can be connected both with ferrules and without ferrules

Cable structure
Signal type/category PROFINET CAT5 (on the basis of IEC 11801), 100 Mbps
Stripping length of the individual wire 7 mm

Insertion/withdrawal cycles ≥ 100 (Quantity: 500 with Phoenix Contact mating connector)
Header 1
Type Socket, angled

Rated surge voltage 1.5 kV
Nominal current IN 4 A (2 A when using 0.14 mm2 conductors)
Contact resistance ≤ 5 mΩ
Insulation resistance ≥ 100 MΩ
Nominal voltage UN 48 V AC
60 V DC

Dimensional drawing
Socket M12-SPEEDCON, angled, shielded
Length 48 mm
External dimensions
External diameter 4 mm ... 8 mm
Housing
Diameter housing 19 mm

Ambient temperature (operation) -40 °C ... 85 °C (Plug / socket)
Degree of protection IP65
IP67
IP65/IP67

Connection technology
Connection method Push-in connection
External diameter 4 mm ... 8 mm
Conductor connection
Connection method Push-in connection
Cross section AWG 26 ... 18
Conductor cross section flexible 0.14 mm2 ... 0.75 mm2

Assembly instruction: NOTE: Observe the permissible bending radii when laying conductors, since the degree of protection may be put in jeopardy if the bending forces are too high. Alleviate mechanical loads upstream of the connector, e.g. by using cable ties.
General This product corresponds to the PROFINET Cabling and Interconnection Technology Guideline for PROFINET regulations, version 2.00, order no: 2.252, Chapter 8.2 Connectors for Outside Environment (Balanced cabling)
Environmental Product Compliance
China RoHS Environmentally friendly use period: unlimited = EFUP-e
No hazardous substances above threshold values

Standards/specifications IEC 61076-2-101
EN 50155:2001
Testing
Standards/regulations PA 6.6: Fire protection in rail vehicles - requirement sets R22, R23, R24, R25, and R26 acc. to DIN EN 45545-2 (Risk level HL1 - HL3)
PA 6: Fire protection in rail vehicles - requirement sets R22, R23, and R24 acc. to DIN EN 45545-2 (Risk level HL1 - HL3)

Contact material CuSn
Material of grip body Zinc die-cast, nickel-plated
Cable gland material Zinc die-cast, nickel-plated
Contact surface material Ni/Au
Sealing material NBR
Standards/regulations PA 6.6: Fire protection in rail vehicles - requirement sets R22, R23, R24, R25, and R26 acc. to DIN EN 45545-2 (Risk level HL1 - HL3)
PA 6: Fire protection in rail vehicles - requirement sets R22, R23, and R24 acc. to DIN EN 45545-2 (Risk level HL1 - HL3)
Material TPE-U (Clamping cage, weight: 1.1 g)
PA 6 (Actuation lever)
Flammability rating according to UL 94 V0
Contact carrier material PA 6.6

Number of positions 4
Coding D - data
Insulation characteristics
Overvoltage category II
Degree of pollution 3


Order Key 1424685
Packing unit 1 pc
Minimum order quantity 1 pc
Catalog Page Page 343 (C-2-2019)
GTIN 4055626376127
Weight per Piece (including packing) 44.2 GRM
Weight per Piece (excluding packing) 44.2 GRM
Customs tariff number 85366990
Country of origin DE



EAC

UL Listed

Approval Specification Data
Nominal voltage UN 60 V
Nominal current IN 4 A
AWG/kcmil
Min. cross section 26 mm²
Max. cross section 18 mm²

cUL Listed

Approval Specification Data
Nominal voltage UN 60 V
Nominal current IN 4 A
AWG/kcmil
Min. cross section 26 mm²
Max. cross section 18 mm²

EAC

cULus Listed


Your advantages

Conveniently connect stranded conductors, thanks to lever
Easy and tool-free connection by means of Push-in Technology
Flexible signal and data cabling
Quick and easy installation, thanks to Push-in connection technology
Reliable and quick connection of electric cables
Flexible cable outlets with angled connectors