HEAVYCON EVO sleeve housing, EMC version, without powder coating, with bayonet flange for EVO screw connection, B10, for double locking latch, height: 80 mm, without EVO screw connection.
| General | For contact inserts HC-B10, BB18, DD42, M, K8/24 |
| Type | B10 |
| Product type | Housing with locking latch |
| Application | Standard |
| No. of cable outlets | 1 |
| Housing type | Sleeve housing |
| Locking type | for double locking latch |
| Cable outlet | straight |
| Pg screw connection | none |
| Dimensional drawing |
|
| Width | 44 mm |
| Height | 80 mm |
| Length | 73 mm |
| Color | gray aluminum |
| Housing surface material | uncoated |
| Impact strength | IK09 |
| Housing material | Die-cast aluminum, salt water resistant |
| Degree of protection | IP66 |
| IP67 | |
| Degree of protection | 4 (UL 50e) |
| 4X (UL 50e) | |
| 12 (UL 50e) | |
| Impact strength | IK09 |
| Ambient temperature (operation) | -40 °C ... 125 °C |
| Mechanical data | |
| Locking type | Pin |
| Assembly instructions | The sleeve base housing must be supplemented with the EVO screw connection. The EVO screw connection is available in 4 sizes. It enables the creation of a straight or a lateral cable outlet. The EVO screw connection is assembled by hand or using a pipe wrench. |